PSZ2610
2. Specification
PSZ2610 |
|
|
Overall size (L x W x H) | 2085 x 250 x 310mm | |
Dry weight | 5.5kg | |
Engine Type | ||
Model | Zenoah GZ25N | |
Displacement | 25.4cm3 | |
Max. output | .. 1.2Hp (0.9kW) at | |
Idle speed | .................... | |
Fuel | Mixture (Gasoline 50 : Oil 1) | |
(when using ZENOAH genuine oil) | ||
Carburetor | ............... | Walbro Diaphragm type |
Spark plug | ................................. | NGK CMR7H |
Durability period | 300 hrs | |
Fuel tank capacity | 0.65 | |
Transmission | Centrifugal clutch, Rigid driveshaft | |
Reduction ratio | 0.94 |
Cutting head |
| |
Guide bar | Type | OREGON DOUBLE GUARD |
| Size | 10(25) in.(cm) |
Saw chain | Type | OREGON 90SG39X |
| Pitch x Gauge . | 3/8x0.043 (9.53 x 1.07) in.(cm) |
Sprocket | 7T | |
Oil pump | Plunger type | |
Standard Accessories |
| |
Shoulder Strap | 1 pc. | |
Tool Kit | 1 pc. | |
Guide bar protector | 1 pc. |
Specifications are subject to change without notice.
3. Warning labels on the machine
(1)Read owner's manual before operating this machine.
(2)Wear head, eye and ear protection.
(3)Warning/Attention
(4)The unit has not been designed to provide protection from electric shock in the event of contact with overhead electric lines.
If warning label peels off or becomes soiled and impossible to read, you should contact the dealer from which you purchased the product to order new labels and affix them in the required location(s).
Never modify your machine.
We won’t warrant the machine, if you use the remodeled pruning saw or if you don’t ob- serve the proper usage written in the manual.
4. Symbols on the machine
For safe operation and maintenance, symbols are carved in relief on the machine. According to these indications, please be careful not to make a mistake.
The port to refuel the “MIX GASOLINE”
Position: FUEL TANK CAP
The direction to close the choke
Position: AIR CLEANER COVER
The direction to open the choke
Position: AIR CLEANER COVER
MIN MAX
If you turn the rod by screwdriver follow the arrow to the “MAX” position, the chain oil flow more, and if you turn to the “MIN” position, less.
Position: Bottom of the GEAR CASE