Zenoah EB7001 owner manual Replacement Plug, Muffler, Spark Arrester, AIR Inlet NET

Page 12

EB7001

9. Maintenance

REPLACEMENT PLUG

NGK BPMR7A

IMPORTANT

•Note that using any spark plugs other than those des- ignated may result in the engine failing to operate properly or in the engine becoming overheated and damaged.

•To install the spark plug, first turn the plug until it is finger tight, then tighten it a quarter turn more with a socket wrench.

MUFFLER

WARNING

•Inspect periodically, the muffler for loose fasteners, any damage or corrosion. If any sign of exhaust leak- age is found, do not use the blower and have it re- paired immediately.

•Note that failing to do so may result in the engine catching on fire.

IMPORTANT

•Before starting operation, always make sure to check if the muffler is properly held by three bolts to the cyl- inder and crank case. (Fastening Torque : 8~12 N·m)

•Also make sure that the spark arrester and the dif- fuser are properly attached with four bolts (Fastening Torque : 2~3 N·m)

•Even if one of seven bolts is loose, it may result in engine catching on fire.

(1) Bolt

(2) Spark Arrester

SPARK ARRESTER

•The muffler is equipped with a spark arrester to pre- vent red hot carbon from flying out of the exhaust out- let. Periodically inspect and clean as necessary with a wire brush. In the State of California it is required by law (Section 4442 of the California Pulic Resources Code) to equip a spark arrester when a gas powered tool is used in any forest covered, bush covered, or grass covered unimproved land.

NOTE

Fit the Spark Arrester on the pipe and tightly fix with the clip

GB-12

PROCEDURES TO BE PERFORMED AFTER EV- ERY 100 HOURS OF USE

1.Remove the muffler, insert a screwdriver into the vent, and wipe away any carbon buildup. Wipe away any carbon buildup on the muffler exhaust vent and cylin- der exhaust port at the same time.

2.Tighten all screws, bolts, and fittings.

AIR INLET NET

IMPORTANT

•Blowing air is taken in from the air inlet net. When air flow has dropped down during operation, stop the engine and inspect the air inlet net for blocking by obstacles.

•Note that failure to remove any such obstacles may result in the engine becoming overheated and dam- aged.

(1)

(1)Net

WARNING

Never use the blower without the net of the blower. Before each use, check that the net is attached in place and is free from any damage.

Page 11 Page 13
Image 12
Page 11 Page 13
Contents EB7001 Contents Parts locationSpecification Symbols on the machineModel EB7001For safe operation Working ConditionAvoid Noise Problem Working CircumstanceWorking Plan FuelUsing the Product Temperature of the machine may increase after stoppingMaintenance TransportationStorage DisposalSet up Flexible Hose and Swivel JointControl Handle Blow PipesHOW to MIX Fuel FuelRecommended Mixing Ratio Gasoline 50 OIL Fueling the UnitAdjusting Idle Speed Ignition SwitchOperation Starting EngineMaintenance AIR CleanerCleaning AIR Filter Fuel FilterReplacement Plug Procedures to be Performed After EV- ERY 100 Hours of USEMuffler Spark ArresterStorage DisposalHarness Before Storing the BlowerTroubleshooting guide Limited warrantyCheck Probable Causes Action

EB7001 specifications

The Zenoah EB7001 is a powerful and versatile backpack blower designed for both professional and residential landscaping tasks. Renowned for its exceptional performance, the EB7001 has become a popular choice among landscape professionals and homeowners alike.

One of the standout features of the Zenoah EB7001 is its robust engine. It is equipped with a commercial-grade, 2-stroke engine that delivers an impressive air speed of up to 210 mph. This high-performance engine ensures that debris, leaves, and grass clippings can be easily cleared from lawns, driveways, and gardens, making this blower highly efficient for various outdoor clean-up tasks.

In terms of design, the EB7001 is engineered for user comfort and ease of use. It features an ergonomic harness system that distributes the weight evenly across the user’s back, reducing fatigue during extended use. The padded shoulder straps and adjustable harness allow for a customized fit, making it suitable for users of different sizes. Additionally, the blower's lightweight construction, weighing in at around 22 pounds, enhances mobility and maneuverability, providing increased freedom of movement while working.

Another key technology in the EB7001 is the Easy Start system. This innovative feature simplifies the starting process, allowing users to start the engine with minimal effort, even in cold weather. The blower also includes a digital ignition system, which enhances fuel efficiency and ensures reliable starting performance.

The EB7001 is designed with durability in mind, featuring high-quality materials that can withstand the rigors of outdoor use. The blower is built to last and is resistant to wear and tear, making it a sound investment for those who require a dependable leaf blower season after season.

Moreover, the Zenoah EB7001 meets emission standards, making it an environmentally friendly option for lawn care. Its improved fuel efficiency translates into reduced fuel consumption, lowering overall operational costs.

In conclusion, the Zenoah EB7001 backpack blower combines power, comfort, and durability, making it an excellent choice for anyone looking for efficient outdoor cleaning equipment. With its advanced technologies and thoughtful design, the EB7001 meets the needs of both professional landscapers and homeowners who demand performance and quality.
Top Page Image Contents