Zenoah BCZ2400S manual  14 , Recommended Mixing Ratio Gasoline 50OIL, HOW to MIX Fuel

Page 14

7. Fuel

WARNING

•Gasoline is very flammable. Avoid smoking or bringing any flame or sparks near fuel. Make sure to stop the engine and allow it cool before refueling the unit. Select outdoor bare ground for fueling and move at least 3m (10ft) away from the fueling point before starting the engine.

•The RedMax engines are lubricated by oil specially formulated for air-cooled 2-cycle gasoline engine use. If RedMax oil is not available, use an anti-oxidant added quality oil expressly labeled for air-cooled 2-cycle engine use. (JASO FC GRADE OIL or ISO EGC GRADE)

•Do not use BIA or TCW (2-stroke water- cooling type) mixed oil.

14

■RECOMMENDED MIXING RATIO GASOLINE 50:OIL 1

50:1 MIXING CHART

GASOLINE gal. 1 2 3 4 5

2-CYCLE OIL fl.oz 2.6 5.2 7.8 10.4 13

GASOLINE liter 1

2

3

4

5

2-CYCLE OIL ml 20 40 60 80 100

•Exhaust emission are controlled by the fundamental engine parameters and components(eq., carburation, ignition timing and port timing) without addition of any major hardware or the introduction of an inert material during combustion.

•These engines are certified to operate on unleaded gasoline.

•Make sure to use gasoline with a minimum octane number of 89 RON (USA/Canada: 87AL)

•If you use a gasoline of a lower octane value than prescribed, there is a danger that the engine temperature may rise and an engine problem such as piston seizing may consequently occur.

•Unleaded gasoline is recommended to reduce the contamination of the air for the sake of your health and the environment.

•Poor quality gasolines or oils may damage sealing rings, fuel lines or fuel tank of the engine.

■HOW TO MIX FUEL

IMPORTANT

Pay attention to agitation.

1.Measure out the quantities of gasoline and oil to be mixed.

2.Put some of the gasoline into a clean, approved fuel container.

3.Pour in all of the oil and agitate well.

4.Pour In the rest of gasoline and agitate

Page 13 Page 15
Image 14
Page 13 Page 15
Contents BCZ2400S Page Safety First Contents 4  SpecificationsParts location  5  Symbols on the machine  6 Working Circumstance For safe operationWorking Condition  7 Working Plan  8  9  Before Starting the EngineStarting the Engine Using the Product  10 Handling Fuel MaintenanceIf Someone Comes  11 Transportation  12 Set up  13  14  HOW to MIX FuelFuel Recommended Mixing Ratio Gasoline 50OILFueling the Unit For Your Engine LIFE, AvoidOP3 OP4 Starting Engine OperationOP1  16  17   18  Adjusting the Line LengthOP7 MA1 Refilling Trimming Line MA1 MaintenanceMaintenance Chart  19  20  Gear Case MA6 MA5 MA6 MufflerSpark Arrester Intake AIR Cooling VentMA8 Procedures to be Performed After Every 100 Hours of USEStorage  22 Optional blade usage  23  24  Operation OPT8 OPT9 OPT10Cutting Method  25 Controlling Blade Bounce OPT11 26  Transporting the Unit Maintenance BladeOPT12  27  28  Troubleshooting guideCheck Probable Causes Action Parts list  29 Drive Unit BCZ2400S S/N 20001 and up  30 Optional Blade & Accessories  31 Engine Unit BCZ2400S S/N 200101 and up  32  33  Part Number Description QtyManufacturer’s warranty coverage RedMax 2-YEAR Limited Warranty RedMax Garantie limitée à 2 ans

BCZ2400S specifications

The Zenoah BCZ2400S is a powerful and versatile brush cutter designed for both professional and home users who need a reliable tool for tackling tough vegetation. With its robust design and advanced technology, the BCZ2400S stands out in the market as a preferred choice for landscaping, gardening, and agricultural applications.

One of the main features of the Zenoah BCZ2400S is its efficient engine. The brush cutter is powered by a high-performance 23.9 cc two-stroke engine, which delivers ample power while maintaining fuel efficiency. This combination ensures that users can operate the machine for extended periods without frequent refueling. The engine is designed with an easy-start system that minimizes the effort required to start the tool, allowing for quick and hassle-free operation.

The ergonomics of the BCZ2400S are noteworthy, featuring a lightweight design that reduces user fatigue during prolonged use. The handle is adjustable, allowing for customization to suit different user heights and preferences. This adaptability contributes to comfortable handling and improved control, which is essential for precise cutting tasks.

An essential aspect of the Zenoah BCZ2400S is its advanced cutting system. The brush cutter is equipped with a dual-line head, allowing users to tackle both thick grass and stubborn weeds with ease. The nylon cutting line can be easily replaced, ensuring minimal downtime during work. Additionally, the machine has the option to use various cutting blades, giving users the flexibility to select the appropriate tool for different applications.

The BCZ2400S also features a durable construction, which is crucial for outdoor tools that will face harsh conditions. The metal frame and high-quality materials ensure longevity, making it a sound investment for both commercial users and homeowners. The protective cover means added safety during operation, preventing debris from being thrown in the direction of the user.

In conclusion, the Zenoah BCZ2400S brush cutter is engineered for performance, comfort, and adaptability. With its powerful engine, ergonomic design, and versatile cutting capabilities, it delivers exceptional results in various applications. Whether it's maintaining a large garden, clearing land, or managing rough terrains, the BCZ2400S stands ready to meet the demands of modern users, making outdoor maintenance tasks more efficient and effective.
Top Page Image Contents