Zenoah BCZ2400S manual Fueling the Unit, For Your Engine LIFE, Avoid

Page 15

7. Fuel

again for at least one minute. As some oils may be difficult to agitate depending on oil ingredients, sufficient agitation is necessary for the engine to last long. Be careful that, if the agitation is insufficient, there is an increased danger of early piston seizing due to abnormally lean mixture.

5.Put a clear indication on the outside of the container to avoid mixing up with gasoline or other containers.

6.Indicate the contents on outside of container for easy identification.

■FUELING THE UNIT

1.Untwist and remove the fuel cap. Rest the cap on a dustless place.

2.Put fuel into the fuel tank to 80% of the full capacity.

3.Fasten the fuel cap securely and wipe up any fuel spillage around the unit.

WARNING

1.Select bare ground for fueling.

2.Move at least 10feet (3meters) away from the fueling point before starting the engine.

3.Stop the engine before refueling the unit. At that time, be sure to sufficiently agitate the mixed gasoline in the container.

FOR YOUR ENGINE LIFE, AVOID;

1.FUEL WITH NO OIL(RAW GASOLINE) – It will cause severe damage to the internal engine parts very quickly.

2.GASOHOL – It can cause deterioration of rubber and/or plastic parts and disruption of engine lubrication.

3.OIL FOR 4-CYCLE ENGINE USE – It can cause spark plug fouling, exhaust port blocking, or piston ring sticking.

4.Mixed fuels which have been left unused for a period of one month or more may clog the carburetor and result in the engine failing to operate properly.

5.In the case of storing the product for a

long period of time, clean the fuel tank after rendering it empty. Next, activate the engine and empty the carburetor of the composite fuel.

6.In the case of scrapping the used mixed oil container, scrap it only at an authorized repository site.

NOTE

As lot details of quality assurance, read the description in the section Limited Warranty carefully. Moreover, normal wear and change in product with no functional influence are not covered by the warranty. Also, be careful that, if the usage in the instruction manual is not observed as to fhe mixed gasoline, etc. described therein, if may not be covered by the warranty.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents BCZ2400S Page Contents Safety FirstSpecifications Parts location 4   5   6  Symbols on the machine 7  For safe operationWorking Condition Working Circumstance 8  Working PlanBefore Starting the Engine Starting the Engine 9   10  Using the Product 11  MaintenanceIf Someone Comes Handling Fuel 12  Transportation 13  Set upRecommended Mixing Ratio Gasoline 50OIL HOW to MIX FuelFuel  14 For Your Engine LIFE, Avoid Fueling the Unit 16  OperationOP1 OP3 OP4 Starting Engine 17  Adjusting the Line Length OP7 18   19  MaintenanceMaintenance Chart MA1 Refilling Trimming Line MA1 20  Intake AIR Cooling Vent MA5 MA6 MufflerSpark Arrester Gear Case MA6 22  Procedures to be Performed After Every 100 Hours of USEStorage MA8 23  Optional blade usage 24   25  OPT8 OPT9 OPT10Cutting Method OperationOPT11  26 Controlling Blade Bounce  27  Maintenance BladeOPT12 Transporting the UnitTroubleshooting guide Check Probable Causes Action 28   29  Parts list 30  Drive Unit BCZ2400S S/N 20001 and up 31  Optional Blade & Accessories 32  Engine Unit BCZ2400S S/N 200101 and upPart Number Description Qty  33 Manufacturer’s warranty coverage RedMax 2-YEAR Limited Warranty RedMax Garantie limitée à 2 ans

BCZ2400S specifications

The Zenoah BCZ2400S is a powerful and versatile brush cutter designed for both professional and home users who need a reliable tool for tackling tough vegetation. With its robust design and advanced technology, the BCZ2400S stands out in the market as a preferred choice for landscaping, gardening, and agricultural applications.

One of the main features of the Zenoah BCZ2400S is its efficient engine. The brush cutter is powered by a high-performance 23.9 cc two-stroke engine, which delivers ample power while maintaining fuel efficiency. This combination ensures that users can operate the machine for extended periods without frequent refueling. The engine is designed with an easy-start system that minimizes the effort required to start the tool, allowing for quick and hassle-free operation.

The ergonomics of the BCZ2400S are noteworthy, featuring a lightweight design that reduces user fatigue during prolonged use. The handle is adjustable, allowing for customization to suit different user heights and preferences. This adaptability contributes to comfortable handling and improved control, which is essential for precise cutting tasks.

An essential aspect of the Zenoah BCZ2400S is its advanced cutting system. The brush cutter is equipped with a dual-line head, allowing users to tackle both thick grass and stubborn weeds with ease. The nylon cutting line can be easily replaced, ensuring minimal downtime during work. Additionally, the machine has the option to use various cutting blades, giving users the flexibility to select the appropriate tool for different applications.

The BCZ2400S also features a durable construction, which is crucial for outdoor tools that will face harsh conditions. The metal frame and high-quality materials ensure longevity, making it a sound investment for both commercial users and homeowners. The protective cover means added safety during operation, preventing debris from being thrown in the direction of the user.

In conclusion, the Zenoah BCZ2400S brush cutter is engineered for performance, comfort, and adaptability. With its powerful engine, ergonomic design, and versatile cutting capabilities, it delivers exceptional results in various applications. Whether it's maintaining a large garden, clearing land, or managing rough terrains, the BCZ2400S stands ready to meet the demands of modern users, making outdoor maintenance tasks more efficient and effective.
Top Page Image Contents