Zenoah BCZ2610DL Troubleshooting guide, Limited warranty, Check Probable Causes Action

Page 16

BCZ2610DL

12. Troubleshooting guide

Case 1. Starting failure

 

 

 

CHECK

PROBABLE CAUSES

ACTION

 

fuel tank

→ incorrect fuel

→ drain it and use correct fuel

 

fuel filter

→ fuel filter is clogged

→ clean

 

carburetor adjustment screw

→ out of normal range

→ adjust to normal range

 

sparking (no spark)

→ spark plug is fouled/wet

→ clean/dry

 

 

→ plug gap is incorrect

→ correct (GAP: 0.6 ~ 0.7 mm)

 

spark plug

→ disconnected

→ retighten

Case 2. Engine starts but does not keep running/hard re-starting

 

 

CHECK

PROBABLE CAUSES

ACTION

 

fuel tank

→ incorrect fuel or staled fuel

→ drain it and use correct fuel

 

carburetor adjustment screw

→ out of normal range

→ adjust to normal range

 

muffler, cylinder (exhaust port)

→ carbon is built-up

→ wipe away

 

air cleaner

→ clogged with dust

→ wash

 

cylinder fin, fan cover

→ clogged with dust

→ clean

When your unit seems to need further service, please consult with our ZENOAH service shop in your area.

Limited warranty

Should any failure occur on the product under normal oper- ating conditions within the applicable warranty period, the failed part will be replaced or repaired free of charge by a ZENOAH authorized dealer.

WARRANTY PERIOD: 1 year (6 months if used profession- ally, and 30 days if used for rental purpose) from the date of initial purchase.

THE PURCHASER SHALL BEAR COSTS OF TRANS- PORTING THE UNIT TO AND FROM THE ZENOAH DEALER.

THE PURCHASER SHALL NOT BE CHARGED FOR DIAG- NOSTIC LABOR WHICH LEADS TO THE DETERMINATION THAT A WARRANTED PART IS DEFECTIVE, IF THE DIAG- NOSTIC WORK IS PERFORMED AT THE ZENOAH DEALER.

THE PURCHASER OR OWNER IS RESPONSIBLE FOR THE PERFORMANCE OF THE REQUIRED MAINTENANCE AS DEFINED BY THE MANUFACTURER IN THE OWNER/OP- ERATOR MANUAL.

ANY WARRANTED PART WHICH IS NOT SCHEDULED FOR REPLACEMENT AS REQUIRED MAINTENANCE, OR WHICH IS SCHEDULED ONLY FOR REGULAR INSPECTION TO THE EFFECT OF REPAIR OR “REPLACE AS NECES- SARY” SHALL BE WARRANTED FOR THE WARRANTY PE- RIOD. ANY WARRANTED PART WHICH IS SCHEDULED FOR REPLACEMENT AS REQUIRED MAINTENANCE SHALL BE WARRANTED FOR THE PERIOD OF TIME UP TO THE FIRST SCHEDULED REPLACEMENT POINT FOR THE PART.

ANY REPLACEMENT PART THAT IS EQUIVALENT IN PER- FORMANCE AND DULABILITY MAY BE USED IN NON-

WARRANTY MAINTENANCE OR REPAIRS, AND SHALL NOT REDUCE THE WARRANTY OBLIGATION OF THE COMPANY.

THE COMPANY IS LIABLE FOR DAMAGES TO OTHER ENGINE COMPONENTS CAUSED BY THE FAIRURE OF A WARRANTED PARTS STILL UNDER WARRANTY.

THE WARRANTY DOES NOT APPLY TO THOSE UNITS WHICH HAVE BEEN DAMAGED BY NEGLIGENCE OF IN- STRUCTION LISTED IN THE OWNER/OPERATOR MANUAL FOR PROPER USE AND MAINTENANCE OF THE UNITS ACCIDENT MISHANDLING, ALTERATION, ABUSE, IM- PROPER LUBRICATION, USE OF ANY PARTS OR ACCES- SARIES OTHER THAN THOSE SPECIFIED BY THE COM- PANY, OR OTHER CAUSES BEYOND THE COMPANY’S CONTROL.

THIS WARRANTY DOES NOT COVER THOSE PARTS RE- PLACED BY NORMAL WEAR OR HARMLESS CHANGES IN THEIR APPEARANCE.

THERE ARE NO OTHER EXPRESS WARRANTIES.

IMPLIED WARRANTIES INCLUDING THOSE OF MER- CHANTABILITY AND FITNESS FOR A PARTICULAR PUR- POSE ARE LIMITED TO TWO (2) YEARS OF HOME USE [ONE (1) YEAR FOR ANY OTHER USE] FROM THE ORIGI- NAL DELIVERY DATE.

LIABILITIES FOR INCIDENTAL OR CONSEQUENTIAL DAMAGE UNDER ANY AND ALL WARRANTIES ARE EXCLUDED.

IF YOU NEED TO OBTAIN MORE INFORMATION, PLEASE C A L L Y O U R N E A R E S T S E R V I C E C E N T E R , OR CHECK PLEASE ZENOAH WEB SITE http://www.zenoah.net

GB-16

Image 16
Contents BCZ2610DL Wear head, eye and ear protection 1st JanuaryE13*97/68SH2G3*2002/88*0404*00 Contents Parts locationSymbols on the machine SpecificationNever modify your machine For safe operation Working ConditionWorking Circumstance Working PlanBefore Starting Engine Using the ProductStarting the Engine Maintenance If Someone ComesHandling Fuel TransportationSet up Fuel Stop Start Stop switch OperationStarting Engine Cutting head will start rotating upon the engine startsAdjusting Throttle Cable Adjusting Idling SpeedCutter Application Chart Metal Blade UsageAdjusting the Line Length Cutting MethodControlling Blade Bounce Cutting Work Line Head UsageMaintenance Maintenance ChartFor safety reasons, do not use metalreinforced line PointReplacement Plug is a NGK CMR7H AIR FilterFuel Filter Spark PlugStorage Procedures to be Performed After Every 100 Hours of USEDisposal Limited warranty Troubleshooting guideCheck Probable Causes Action