Zenoah BC4401DW manual  13 , Recommended Mixing Ratio Gasoline 50OIL, HOW to MIX Fuel

Page 13

Fuel

WARNING

•Gasoline is very flammable. Avoid smoking or bringing any flame or sparks near fuel. Make sure to stop the engine and allow it cool before refueling the unit. Select outdoor bare ground for fueling and move at least 3m (10ft) away from the fueling point before starting the engine.

•The RedMax engines are lubricated by oil specially formulated for air-cooled 2-cycle gasoline engine use. If RedMax oil is not available, use an anti-oxidant added quality oil expressly labeled for air-cooled 2-cycle engine use. (JASO FC GRADE OIL or ISO EGC GRADE)

•Do not use BIA or TCW (2-stroke water- cooling type) mixed oil.

■RECOMMENDED MIXING RATIO GASOLINE 50:OIL 1

(when using ZENOAH genuine oil)

50:1 MIXING CHART

GASOLINE gal. 1 2 3 4 5

2-CYCLE OIL fl.oz 2.6 5.2 7.8 10.4 13

GASOLINE liter 1

2

3

4

5

2-CYCLE OIL ml 20 40 60 80 100

•Exhaust emission are controlled by the fundamental engine parameters and components(eq., carburation, ignition timing and port timing) without addition of any major hardware or the introduction of an inert material during combustion.

•These engines are certified to operate on unleaded gasoline.

•Make sure to use gasoline with a minimum octane number of 89 RON (USA/Canada: 87AL)

•If you use a gasoline of a lower octane value than prescribed, there is a danger that the engine temperature may rise and an engine problem such as piston seizing may consequently occur.

•Unleaded gasoline is recommended to reduce the contamination of the air for the sake of your health and the environment.

•Poor quality gasolines or oils may damage sealing rings, fuel lines or fuel tank of the engine.

■HOW TO MIX FUEL

IMPORTANT

Pay attention to agitation.

1.Measure out the quantities of gasoline and oil to be mixed.

2.Put some of the gasoline into a clean, approved fuel container.

3.Pour in all of the oil and agitate well.

4.Pour In the rest of gasoline and agitate

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents 848-G6D-93A1 BC3401DL BC4401DWSafety First Contents  4  SpecificationsBC3401DL BC4401DW 5  Emission control label 6  Safety PrecautionsWork gear and clothing  7 Avoid Noise Problem Things to check before using your brushcutter 8  Things to check before starting up the engine 9  Things to be careful about when using your brushcutter 10   11  Set Up 12  Installing Cutting HeadPutting on Waist PAD BC4401DW only HOW to MIX Fuel When using Zenoah genuine oilFuel  13 Fueling the Unit  14 For Your Engine LIFE, Avoid  15  OperationStarting Engine  16   17  Optional Blade UsageOPT3 OPT4 For BC3401DL OPT5 OPT6  18 Bracket Handle Cutting MethodOPT7 OPT8  19 Operation Controlling Blade Bounce  20 What causes blade thrust How you can reduce the chance of blade thrust 21  Maintenance BladeOPT9 How you can maintain the best control 22  MaintenanceRefilling Trimming Line AIR Filter 23  Storage Procedures to be Performed After Every 100 Hours of USE 24  Intake AIR Cooling Vent Warning 25  Parts List 26  Drive Unit BC3401DL S/N 60200000 and up 27   28  Engine Unit BC3401DL S/N 60200000 and upDescription Part Number Qty  29  30  Drive Unit BC4401DW S/N 60200000 and up 31   32  Engine Unit BC4401DW S/N 60200000 and up 33  Limited Warranty RedMax Garantie limitée Komatsu Zenoah America INC

BC4401DW specifications

The Zenoah BC4401DW is a robust and versatile power tool designed primarily for professional landscapers and garden maintenance enthusiasts. This brushcutter stands out in a crowded market thanks to its combination of power, efficiency, and user-friendly features. As part of the Zenoah family, the BC4401DW is built with high-quality materials and engineering, ensuring durability and performance in various terrains.

One of the main features of the BC4401DW is its powerful engine. The model is equipped with a 44cc, two-stroke engine that delivers impressive torque and speed, making it highly effective for cutting through thick grass, weeds, and brush. This engine is designed for efficiency, ensuring that users can complete their tasks without frequent refueling and downtime.

Another notable technology integrated into the BC4401DW is the Easy Start system, which significantly reduces the effort required to start the machine. The advanced ignition system ensures reliable starts, even in cold weather. This is particularly advantageous for professional landscapers who need to rely on their equipment in various conditions.

The BC4401DW also boasts an ergonomic design that enhances user comfort and control. Its lightweight construction allows for extended periods of use without causing undue fatigue. The adjustable handle provides additional comfort, allowing users to tailor the grip to their preference, which is especially beneficial during long working sessions.

Safety features are also a priority in the design of the BC4401DW. It includes a protective guard to shield the user from debris and a throttle lock to prevent accidental activation. These safety measures offer peace of mind while operating the machine in demanding environments.

In terms of attachments, the BC4401DW is highly versatile. It supports a range of cutting heads, including nylon line and metal blades, allowing users to switch between tasks effortlessly. This adaptability makes it suitable for everything from trimming grass to clearing heavier brush.

Overall, the Zenoah BC4401DW is a powerful and efficient brushcutter that combines advanced technology with user-friendly features. Its powerful engine, ergonomic design, and versatility make it an excellent choice for professionals and gardening enthusiasts alike. Whether tackling residential yards or commercial landscaping projects, the BC4401DW delivers exceptional performance and reliability.
Top Page Image Contents