Zenoah BC4401DW manual Maintenance,  22 , Refilling Trimming Line, AIR Filter

Page 22

Maintenance

Maintenance, replacement, or repair of the emission control device and systems may be performed by any non-road engine repair establishment or individual.

WARNING

•Always be sure to stop the engine before inspecting the brushcutter for problems or performing maintenance.

•Never alter the brushcutter or take the engine apart.

•When replacing parts, always be sure to use only RedMax products or products which have been certified by RedMax for use with the RedMax brushcutter.

•Things to check before using brushcutter

■REFILLING TRIMMING LINE

1.For replacement line, use a diameter of

.095in (2.4mm). The spool is capable for a line upto 27ft (8m) on the 4” head, and 46ft (14m) on the 6” head. Avoid using a larger line as it may cut down the trimming performance. For safety reasons, do not use metalreinforced line.

2.Pinch the slotted area on the both sides of the spool housing to unhook the bottom cap.

3.Take out the spool and pull off the old line. Put one end of new line through the spool holes and pull it until the length is equal between each part of the line.

4.Wind up the line in the correct as indicated on the spool.

5.Hook each end of the line in the slot on the edge of the spool, and then put the ends through the eyelets on the housing. Make sure that the spring and the washers are in place.

6. While holding the spool against the housing, pull the line ends to release them from the slot.

7.Line up the slot on the bottom cap with the hook on the housing, press the cap against the housing until it clicks.

WARNING

•Make sure that the engine has stopped and is cool before performing any service to the brushcutter. Contact with moving cutting head or hot muffler may result in a personal injury.

■AIR FILTER

•The air filter, if clogged, will reduce the engine performance. Monthly check and clean the filter element in warm, soapy water as required. Dry completely before installing. If the element is broken or shrunk, replace with a new one.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents BC3401DL BC4401DW 848-G6D-93A1Safety First Contents BC3401DL Specifications 4  BC4401DWEmission control label  5 Safety Precautions  6  7  Work gear and clothing 8  Things to check before using your brushcutterAvoid Noise Problem Things to check before starting up the engineThings to be careful about when using your brushcutter  9  10  Set Up  11  12  Installing Cutting HeadPutting on Waist PAD BC4401DW only Fuel When using Zenoah genuine oilHOW to MIX Fuel  13 Fueling the Unit  14 For Your Engine LIFE, Avoid  15  OperationStarting Engine  16  Optional Blade Usage  17 Bracket Handle  18 OPT3 OPT4 For BC3401DL OPT5 OPT6 Cutting MethodOPT7 OPT8  19 Operation What causes blade thrust  20 Controlling Blade Bounce How you can reduce the chance of blade thrustOPT9 Maintenance Blade 21  How you can maintain the best controlRefilling Trimming Line Maintenance 22  AIR Filter 23   24  Procedures to be Performed After Every 100 Hours of USEStorage Intake AIR Cooling Vent WarningParts List  25 Drive Unit BC3401DL S/N 60200000 and up  26  27  Engine Unit BC3401DL S/N 60200000 and up  28  29  Description Part Number QtyDrive Unit BC4401DW S/N 60200000 and up  30  31  Engine Unit BC4401DW S/N 60200000 and up  32  33  Limited Warranty RedMax Garantie limitée Komatsu Zenoah America INC

BC4401DW specifications

The Zenoah BC4401DW is a robust and versatile power tool designed primarily for professional landscapers and garden maintenance enthusiasts. This brushcutter stands out in a crowded market thanks to its combination of power, efficiency, and user-friendly features. As part of the Zenoah family, the BC4401DW is built with high-quality materials and engineering, ensuring durability and performance in various terrains.

One of the main features of the BC4401DW is its powerful engine. The model is equipped with a 44cc, two-stroke engine that delivers impressive torque and speed, making it highly effective for cutting through thick grass, weeds, and brush. This engine is designed for efficiency, ensuring that users can complete their tasks without frequent refueling and downtime.

Another notable technology integrated into the BC4401DW is the Easy Start system, which significantly reduces the effort required to start the machine. The advanced ignition system ensures reliable starts, even in cold weather. This is particularly advantageous for professional landscapers who need to rely on their equipment in various conditions.

The BC4401DW also boasts an ergonomic design that enhances user comfort and control. Its lightweight construction allows for extended periods of use without causing undue fatigue. The adjustable handle provides additional comfort, allowing users to tailor the grip to their preference, which is especially beneficial during long working sessions.

Safety features are also a priority in the design of the BC4401DW. It includes a protective guard to shield the user from debris and a throttle lock to prevent accidental activation. These safety measures offer peace of mind while operating the machine in demanding environments.

In terms of attachments, the BC4401DW is highly versatile. It supports a range of cutting heads, including nylon line and metal blades, allowing users to switch between tasks effortlessly. This adaptability makes it suitable for everything from trimming grass to clearing heavier brush.

Overall, the Zenoah BC4401DW is a powerful and efficient brushcutter that combines advanced technology with user-friendly features. Its powerful engine, ergonomic design, and versatility make it an excellent choice for professionals and gardening enthusiasts alike. Whether tackling residential yards or commercial landscaping projects, the BC4401DW delivers exceptional performance and reliability.
Top Page Image Contents