Zenoah BCZ4500/5000CL Refilling Trimming Line, Blade, AIR Filter, Fuel Filter, Spark Plug

Page 13

BCZ4500DL / BCZ4500DW / BCZ4500CL / BCZ5000DL / BCZ5000DW / BCZ5000CL

9. Maintenance

REFILLING TRIMMING LINE

1.For replacement line, use a diameter of 2.4mm(.095in). The spool is capable for a line upto 6m(20ft) on the 10cm(4”) head. Avoid using a larger line as it may cut down the trimming performance.

WARNING

•For safety reasons, do not use metalreinforced line.

2.Pinch the slotted area on the both sides of the spool housing to unhook the bottom cap.

3.Take out the spool and pull off the old line. Put one end of new line through the spool holes and pull it until the length is equal between each part of the line.

4.Wind up the line in the correct direction as indicated on the spool.

5.Hook each end of the line in the slot on the edge of the spool, and then put the ends through the eyelets on the housing. Make sure that the spring and the washers are in place.

6.While holding the spool against the housing, pull the line ends to release them from the slot.

7.Line up the slot on the bottom cap with the hook on the housing, press the cap against the housing until it clicks.

BLADE

•Check the blade and the fasteners for looseness, cracking, or bending.

•Check the cutting edges and reform with a flat file.

Point :

1.Keep the end corner sharp.

2.Round the root of the edge, using round file.

3.Do not use water when using a grinder.

•It is recommended that filing should be done by professionals.

•Especially regarding filing the saw blade, Leave it to the professionals.

WARNING

•Make sure that the engine has stopped and is cool before performing any service to the machine. Contact with moving cutting head or hot muffler may result in a personal injury.

AIR FILTER

•The air filter, if clogged, will reduce the engine per- formance. Check and clean the paper element by air blow as required. If the element becomes dirty, re- place with a new one.

(1)

(1) Paper element

FUEL FILTER

•When the engine runs short of fuel supply, check the fuel cap and the fuel filter for blockage.

(1)

(1) Fuel filter

SPARK PLUG

•Starting failure and misfiring are often caused by a fouled spark plug. Clean the spark plug and check that the plug gap is in the correct range. For a re- placement plug, use the correct type specified by

KOMATSU ZENOAH.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents BCZ4500DL / DW BCZ5000DL / DW BCZ4500 / 5000CL Parts location ContentsSymbols on the machine SpecificationBCZ4500DL/DW BCZ5000DL/DW Working Condition For safe operationWorking Circumstance Working PlanBefore Starting Engine Using the ProductStarting the Engine If Someone Comes MaintenanceHandling Fuel TransportationSet up Fuel Starting Engine OperationCutting head will start rotating upon the en- gine starts Stopping EngineAdjusting Idling Speed Adjusting Throttle CableCutter Application Chart Metal Blade UsageControlling Blade Bounce Cutting MethodCutting Work Line Head Usage Trimming Grass and WeedsAdjusting the Line Length MaintenanceBlade Refilling Trimming LineAIR Filter Fuel FilterStorage Limited warranty Troubleshooting guideCheck Probable Causes Action Printed on Recycled Paper

BCZ5000DL/DW, BCZ4500DL, BCZ4500DW, BCZ5000DL, BCZ5000DW, BCZ4500, BCZ5000CL, BCZ4500DL/DW, BCZ4500DL / DW, BCZ4500/5000CL specifications

The Zenoah BCZ5000DL/DW and BCZ4500/5000 series are a range of high-performance brushcutters designed for professionals and enthusiasts in landscaping and forestry. These models are recognized for their powerful engines, ergonomic design, and advanced technologies that enhance user experience and efficiency in tackling tough cutting tasks.

One of the standout features of the Zenoah BCZ5000DL and BCZ5000DW is their robust 50cc two-stroke engine. This engine delivers exceptional power and torque, making it ideal for heavy-duty applications. The BCZ4500 series, including the BCZ4500DL and BCZ4500DW, is equipped with a slightly smaller yet equally powerful 45cc engine that provides an excellent balance between weight and performance, ensuring that users can operate the tool for extended periods without fatigue.

These brushcutters come with a user-friendly starting system that reduces the effort needed to start the engine. The Easy Start technology includes a decompression valve and an advanced ignition system, which ensures a smooth and hassle-free starting experience, even in challenging conditions.

Ergonomics is a core focus of the Zenoah design philosophy. The BCZ series features a lightweight design paired with adjustable handles that allow for a comfortable grip and reduced strain during extended use. The anti-vibration system is another critical aspect that minimizes vibrations during operation, ensuring that users can work longer with less risk of fatigue or discomfort.

The cutting capabilities of the BCZ series are versatile, with options to switch between different cutting heads and blades, making them suitable for a variety of tasks, from trimming grass to clearing dense underbrush. This adaptability makes them an essential tool for landscape maintenance, agricultural applications, and forestry work.

Moreover, the build quality of Zenoah products is designed to withstand the rigors of heavy use. These brushcutters are constructed with durable materials that enhance their longevity and reliability in demanding environments.

Additionally, Zenoah places importance on fuel efficiency and emissions control. The BCZ series is engineered to optimize fuel consumption, reducing operational costs while also fulfilling stringent emission regulations.

In conclusion, the Zenoah BCZ5000DL/DW and BCZ4500/5000 series stand out for their powerful engines, ergonomic designs, and technological innovations. These brushcutters are built to meet the demands of professional users while providing reliability and ease of use for everyday tasks. Whether you are a seasoned landscaper or a hobbyist, these models offer the performance and durability needed to efficiently tackle any cutting task.
Top Page Image Contents