Zenoah BCZ4500DL, BCZ4500DW, BCZ5000DL, BCZ5000DW, BCZ4500, BCZ5000CL Before Starting Engine

Page 5

BCZ4500DL / BCZ4500DW / BCZ4500CL / BCZ5000DL / BCZ5000DW / BCZ5000CL

5. For safe operation

BEFORE STARTING

THE ENGINE

1. The area within a perimeter of

15 m (50 ft) of the person using the product should be considered a hazardous area into which no one should enter. If necessary, yellow warning rope, warning signs should be placed around the perimeter of the area. When work is to be performed simulta- neously by two or more persons, care should also be taken to con- stantly look around or otherwise check for the presence and loca- tions of other people working so as to maintain a distance between each person sufficient to ensure safety.

2.Check the condition of working area to avoid any accident by hit- ting hidden obstacles such as stumps, stones, cans, or broken glass.

IMPORTANT

Remove any obstacle before begin- ning work.

3.Inspect the entire unit for loose fasteners and fuel leakage. Make sure that the cutting attachment

is properly installed and securely fastened.

4. Be sure the debris guard is firmly attached in place.

5. Always use the shoulder strap. Adjust the strap for comfort be- fore starting the engine. The strap should be adjusted so the left hand can comfortably hold the handlebar grip approximately waist high.

STARTING THE ENGINE

1. Keep bystanders and animals at

least 15 m (50 ft) away from the

operating point. If you are ap-

proached, immediately stop the

engine.

2. The product is equipped with a centrifugal clutch mechanism, so the cutting attachment begins to rotate as soon as the engine is started by putting the throttle into the start position. When starting the engine, place the product onto the ground in a flat clear area and hold it firmly in place so as to

ensure that neither the cutting part nor the throttle come into contact with any obstacle when the engine starts.

WARNING

Never place the throttle into the high-speed position when starting the engine.

3.After starting the engine, check to make sure that the cutting at- tachment stops rotating when the throttle is moved fully back to its original position. If it continues to rotate even after the throttle has been moved fully back, turn off the engine and take the unit to your authorized KOMATSU ZENOAH servicing dealer for re- pair.

USING THE PRODUCT

IMPORTANT

Cut only materials recommended by the manufacturer. And use only for tasks explained in the manual.

1. Grip the handles firmly with both hands using your whole hand. Place your feet slightly apart (slightly further apart than the width of your shoulders) so that your weight is distributed evenly across both legs, and always be sure to maintain a steady, even posture while working.

2.Keep cutting attachment below waist level.

3.Maintain the speed of the engine at the level required to perform cutting work, and never raise the

speed of the engine above the level necessary.

4. If the unit starts to shake or vi- brate, turn off the engine and check the whole unit. Do not use it until the trouble has been prop- erly corrected.

5. Keep all parts of your body away from rotating cutting attachment and hot surfaces.

6. Never touch the muffler, spark plug, or other metallic parts of the engine while the engine is in op- eration or immediately after shut-

ting down the engine. Doing so 5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents BCZ4500DL / DW BCZ5000DL / DW BCZ4500 / 5000CL Parts location ContentsBCZ4500DL/DW BCZ5000DL/DW SpecificationSymbols on the machine Working Condition For safe operationWorking Circumstance Working PlanStarting the Engine Using the ProductBefore Starting Engine If Someone Comes MaintenanceHandling Fuel TransportationSet up Fuel Starting Engine OperationCutting head will start rotating upon the en- gine starts Stopping EngineAdjusting Idling Speed Adjusting Throttle CableCutter Application Chart Metal Blade UsageControlling Blade Bounce Cutting MethodCutting Work Line Head Usage Trimming Grass and WeedsAdjusting the Line Length MaintenanceBlade Refilling Trimming LineAIR Filter Fuel FilterStorage Check Probable Causes Action Troubleshooting guideLimited warranty Printed on Recycled Paper

BCZ5000DL/DW, BCZ4500DL, BCZ4500DW, BCZ5000DL, BCZ5000DW, BCZ4500, BCZ5000CL, BCZ4500DL/DW, BCZ4500DL / DW, BCZ4500/5000CL specifications

The Zenoah BCZ5000DL/DW and BCZ4500/5000 series are a range of high-performance brushcutters designed for professionals and enthusiasts in landscaping and forestry. These models are recognized for their powerful engines, ergonomic design, and advanced technologies that enhance user experience and efficiency in tackling tough cutting tasks.

One of the standout features of the Zenoah BCZ5000DL and BCZ5000DW is their robust 50cc two-stroke engine. This engine delivers exceptional power and torque, making it ideal for heavy-duty applications. The BCZ4500 series, including the BCZ4500DL and BCZ4500DW, is equipped with a slightly smaller yet equally powerful 45cc engine that provides an excellent balance between weight and performance, ensuring that users can operate the tool for extended periods without fatigue.

These brushcutters come with a user-friendly starting system that reduces the effort needed to start the engine. The Easy Start technology includes a decompression valve and an advanced ignition system, which ensures a smooth and hassle-free starting experience, even in challenging conditions.

Ergonomics is a core focus of the Zenoah design philosophy. The BCZ series features a lightweight design paired with adjustable handles that allow for a comfortable grip and reduced strain during extended use. The anti-vibration system is another critical aspect that minimizes vibrations during operation, ensuring that users can work longer with less risk of fatigue or discomfort.

The cutting capabilities of the BCZ series are versatile, with options to switch between different cutting heads and blades, making them suitable for a variety of tasks, from trimming grass to clearing dense underbrush. This adaptability makes them an essential tool for landscape maintenance, agricultural applications, and forestry work.

Moreover, the build quality of Zenoah products is designed to withstand the rigors of heavy use. These brushcutters are constructed with durable materials that enhance their longevity and reliability in demanding environments.

Additionally, Zenoah places importance on fuel efficiency and emissions control. The BCZ series is engineered to optimize fuel consumption, reducing operational costs while also fulfilling stringent emission regulations.

In conclusion, the Zenoah BCZ5000DL/DW and BCZ4500/5000 series stand out for their powerful engines, ergonomic designs, and technological innovations. These brushcutters are built to meet the demands of professional users while providing reliability and ease of use for everyday tasks. Whether you are a seasoned landscaper or a hobbyist, these models offer the performance and durability needed to efficiently tackle any cutting task.
Top Page Image Contents