BK2650DL
2. Specification
Model |
|
| BK2650DL | |
|
|
|
| |
Overall size (LxWxH) | mm | 2616 x 306 x 336 | ||
Dry weight |
| kg | 8.3 | |
Engine |
| Model |
| Zenoah G26LS |
|
| Displacement | cm3 | 25.4 |
|
| Fuel |
| Mixture (Gasoline 50 : Oil 1) |
|
| Carburetor |
| Diaphragm type |
|
| Ignition system |
| Flywheel magneto (C.D.I.) |
|
| Spark plug |
| NGK BPMR 7A |
Fuel tank | capacity | L | 1.1 | |
Starter |
|
| Recoil starter | |
Clutch |
|
| Centrifugal type | |
Reduction ratio |
| 1.67 | ||
Cutting head rotating direction | ||||
|
|
|
|
|
Specifications are subject to change without notice.
3.Warning labels on the machine
Read owner’s manual before oper- ating this machine.
Wear head, eye and ear protec- tion.
Warning / Attention
Keep all children, bystanders and helpers 15 meters away from the machine.
If warning label peels off or becomes soiled and impossible to read, you should contact the dealer from which you purchased the product to order new labels and affix them in the required location(s).
Never modify your machine.
We won’t warrant the machine, if you use the remodeled brushcutter or if you don’t observe the proper usage written in the manual.
4. Symbols on the ma- chine
For safe operation and maintenance, symbols are carved in relief on the machine. According to these indications, please be careful not to make a mistake.
The port to refuel the “MIX GASOLINE”
Position: FUEL TANK CAP
The direction to close the choke
Position: ENGINE COVER
The direction to open the choke
Position: ENGINE COVER