Zenoah BCZ3000 MA5 MA6 Muffler, Spark Arrester, Gear Case MA6, Intake AIR Cooling Vent,  23 

Page 23

9. Maintenance

MA5

(1)

MA6

MUFFLER

WARNING

Inspect periodically, the muffler for loose fasteners, any damage or corrosion. If any sign of exhaust leakage is found, stop using the machine and have it repaired immediately.

Note that failing to do so may result in the engine catching on fire.

SPARK ARRESTER

The muffler is equipped with a spark arrester to prevent red hot carbon from flying out of the exhaust outlet. Periodically inspect and clean as necessary with a wire brush. In the State of California it is required by law (Section 4442 of the California Public Resources Code) to equip a spark arrester when a gas powered tool is used in any forest covered, brush covered, or grass covered unimproved land. (MA5)

(1) spark arrester

GEAR CASE (MA6)

The reduction gears are lubricated by multipurpose, lithium-based grease in the gear case. Supply new grease every 25 hours of use or more often depending on the job condition.

Remove the side bolt in gearcase opposite of grease nipple before installing new grease to arrange for old grease to exit.

INTAKE AIR COOLING VENT

WARNING

Never touch the cylinder, muffler, or spark plugs with your bare hands immediately after stopping the engine. The engine can become very hot when in operation, and doing so could result in severe burns.

When checking the machine to make sure that it is okay before using it, check the area around the muffler and remove any wood chips or leaves which have attached themselves to the brushcutter. Failing to do so could cause the muffler to become overheated, and that this in turn could cause the engine to catch on fire. Always make

23

Image 23
Contents BCZ3000SW BCZ3000SWPage Contents Safety First 4  SpecificationsParts location  5   6  Symbols on the machine 7  For safe operationWorking Condition Working Circumstance 8  Working Plan 9  Before Starting the EngineStarting the Engine  10  Using the Product 11  MaintenanceIf Someone Comes Handling Fuel 12  Transportation 13  Putting on Waist PAD SE5Mounting Engine SE5 SE6 SE7 SE8 15  Installing Cutting Head SE10SE9 Balance UnitRecommended Mixing Ratio Gasoline 50OIL HOW to MIX FuelFuel  16 For Your Engine LIFE, Avoid Fueling the UnitOP4 Starting Engine OperationOP1 OP3 19   20  Adjusting the Line LengthOP7  21  MaintenanceMaintenance Chart MA1 Refilling Trimming Line MA1 22  Intake AIR Cooling Vent MA5 MA6 MufflerSpark Arrester Gear Case MA6 24  Procedures to be Performed After Every 100 Hours of USEStorage MA8 25  Optional blade usageOPT5 OPT2 OPT3 SET UP the BladeStandard OPT4 27  OPT6 OPT7 OPT8Cutting Method OperationControlling Blade Bounce OPT9 28   29  Maintenance BladeOPT10 Transporting the Unit 30  Troubleshooting guideCheck Probable Causes Action  31  Parts list 32  Drive Unit BCZ3000S S/N 300001 and up 33  Optional Blade & Accessories 34  Drive Unit BCZ3000SW S/N 300001 and up 35   36  Part Number Description Qty  37 Manufacturer’s warranty coverage Limited Warranty RedMax Garantie limitée

BCZ3000 specifications

The Zenoah BCZ3000 is a versatile and powerful brush cutter known for its efficiency and reliability in tackling tough vegetation management tasks. Designed for both professional landscapers and homeowners, this machine showcases several innovative features and technologies that contribute to its outstanding performance.

One of the main features of the Zenoah BCZ3000 is its impressive engine. It is powered by a robust 30cc two-stroke engine that delivers a strong power-to-weight ratio, making it highly efficient for various cutting applications. The engine is designed to provide smooth operation while minimizing emissions, aligning with modern environmental standards. This eco-friendly approach ensures that users can maintain their landscapes without compromising air quality.

The BCZ3000 also comes equipped with a comfortable ergonomic design. The adjustable handle system allows users to find the optimal position for improved handling and reduced fatigue during prolonged use. The lightweight construction, complemented by a well-balanced design, enhances maneuverability, enabling users to navigate through dense underbrush and tight spaces with ease.

Another standout characteristic of the Zenoah BCZ3000 is its cutting performance. The brush cutter features a dual-string trimmer head, which is capable of handling tough grasses and weeds effectively. Additionally, the machine is designed to accommodate various cutting attachments, allowing users to switch between trimming and mowing tasks seamlessly. This versatility makes it suitable for a wide range of applications, from maintaining residential gardens to managing larger commercial properties.

Innovative technologies are also integrated into the BCZ3000. The easy starting system reduces the effort required to start the engine, enabling users to get to work quickly. Furthermore, the unit features a centrifugal clutch that automatically engages the trimmer head when the engine reaches a specific RPM, providing enhanced control and reducing operator fatigue.

In summary, the Zenoah BCZ3000 is a top choice for those seeking a reliable brush cutter that combines power, efficiency, and comfort. Its advanced engine technology, ergonomic design, and versatile cutting capabilities make it an ideal companion for tackling all types of vegetation. Whether you're a professional landscaper or a homeowner maintaining your garden, the BCZ3000 promises to deliver exceptional performance and ease of use, making your landscaping tasks more efficient and enjoyable.