Zenoah BCZ3000 manual OPT6 OPT7 OPT8, Cutting Method, Operation,  27 

Page 27

11. Optional blade usage

OPT6

OPT7

OPT8

started by putting the throttle into the start position. When starting the engine, place the product onto the ground in a flat clear area and hold it firmly in place so as to ensure that neither the cutting part nor the throttle come into contact with any obstacle when the engine starts. (OPT6)

■CUTTING METHOD

a)Use the front left side cutting.

b)Guide the blade from your right to left with it tilted slightly to your left. (OPT7)

c)When mowing a wide area, start working from your left end to avoid interference of cut grass.

d)The blade may be seized by weeds if the engine speed is too low, or the blade cuts too deep into weeds. Adjust the engine speed and cutting depth according to the condition of object.

WARNING

•If the grass or other object gets caught in the blade, or if the unit starts to shake or vibrate, turn off the engine and check the whole unit. Change the blade if it has been damaged.

•Turn off the engine and make sure the blade has completely stop before checking the blade, and removing any object got caught in.

■OPERATION

1.Check the bolt to fasten the blade and be sure the bolt has no fault, and no abrasion.

2.Be sure that the blade and the holder have been fastened according to instruction and the blade turns smoothly without abnormal noise. (OPT8)

WARNING

•The rotating parts fastened incorrectly may cause serious accident to the operator.

•Make sure that the blade is not bent, warped, cracked, broken or damaged.

•If you find any error to the blade, discard it and change new one which is certified by RedMax.

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents BCZ3000SW BCZ3000SWPage Contents Safety FirstSpecifications Parts location 4   5   6  Symbols on the machine 7  For safe operationWorking Condition Working Circumstance 8  Working PlanBefore Starting the Engine Starting the Engine 9   10  Using the Product 11  MaintenanceIf Someone Comes Handling Fuel 12  Transportation 13  Putting on Waist PAD SE5Mounting Engine SE5 SE6 SE7 SE8 15  Installing Cutting Head SE10SE9 Balance UnitRecommended Mixing Ratio Gasoline 50OIL HOW to MIX FuelFuel  16 For Your Engine LIFE, Avoid Fueling the UnitOP4 Starting Engine OperationOP1 OP3 19  Adjusting the Line Length OP7 20   21  MaintenanceMaintenance Chart MA1 Refilling Trimming Line MA1 22  Intake AIR Cooling Vent MA5 MA6 MufflerSpark Arrester Gear Case MA6 24  Procedures to be Performed After Every 100 Hours of USEStorage MA8 25  Optional blade usageOPT5 OPT2 OPT3 SET UP the BladeStandard OPT4 27  OPT6 OPT7 OPT8Cutting Method OperationOPT9  28 Controlling Blade Bounce  29  Maintenance BladeOPT10 Transporting the UnitTroubleshooting guide Check Probable Causes Action 30   31  Parts list 32  Drive Unit BCZ3000S S/N 300001 and up 33  Optional Blade & Accessories 34  Drive Unit BCZ3000SW S/N 300001 and up 35   36  Part Number Description Qty  37 Manufacturer’s warranty coverage Limited Warranty RedMax Garantie limitée

BCZ3000 specifications

The Zenoah BCZ3000 is a versatile and powerful brush cutter known for its efficiency and reliability in tackling tough vegetation management tasks. Designed for both professional landscapers and homeowners, this machine showcases several innovative features and technologies that contribute to its outstanding performance.

One of the main features of the Zenoah BCZ3000 is its impressive engine. It is powered by a robust 30cc two-stroke engine that delivers a strong power-to-weight ratio, making it highly efficient for various cutting applications. The engine is designed to provide smooth operation while minimizing emissions, aligning with modern environmental standards. This eco-friendly approach ensures that users can maintain their landscapes without compromising air quality.

The BCZ3000 also comes equipped with a comfortable ergonomic design. The adjustable handle system allows users to find the optimal position for improved handling and reduced fatigue during prolonged use. The lightweight construction, complemented by a well-balanced design, enhances maneuverability, enabling users to navigate through dense underbrush and tight spaces with ease.

Another standout characteristic of the Zenoah BCZ3000 is its cutting performance. The brush cutter features a dual-string trimmer head, which is capable of handling tough grasses and weeds effectively. Additionally, the machine is designed to accommodate various cutting attachments, allowing users to switch between trimming and mowing tasks seamlessly. This versatility makes it suitable for a wide range of applications, from maintaining residential gardens to managing larger commercial properties.

Innovative technologies are also integrated into the BCZ3000. The easy starting system reduces the effort required to start the engine, enabling users to get to work quickly. Furthermore, the unit features a centrifugal clutch that automatically engages the trimmer head when the engine reaches a specific RPM, providing enhanced control and reducing operator fatigue.

In summary, the Zenoah BCZ3000 is a top choice for those seeking a reliable brush cutter that combines power, efficiency, and comfort. Its advanced engine technology, ergonomic design, and versatile cutting capabilities make it an ideal companion for tackling all types of vegetation. Whether you're a professional landscaper or a homeowner maintaining your garden, the BCZ3000 promises to deliver exceptional performance and ease of use, making your landscaping tasks more efficient and enjoyable.
Top Page Image Contents