Zenoah G455AVS manual B. Guide Bar

B. Guide Bar

•Reverse the bar occasionally to prevent partial wear.

•The bar rail should always be a square. Check for wear of the bar rail. Apply a ruler to the bar and the outside of a cutter. If a gap is observed between them, the rail is normal. Otherwise, the bar rail is worn. Such a bar needs to be corrected or replaced.

WARNING:

This saw is equipped with the following low kickback bar/chain combination:

		RedMax® Part Number
Saw Model	Bar Size	Guide Bar	Saw Chain
G455AVS	16”	G0021	33SL-66X

For replacement use only above bars and chains or the following:

OREGON BAR

16 inch DOUBLE GUARD™ Pro bar, Mount code #A195.

OREGON CHAIN

G455AVS

33SL

16