G6200
2. Explanation of Symbols on the Machine
WARNING
•For safe operation and maintenance, symbols are carved in relief on the machine. According to these indications, please be careful not to make any mistake.
The port to refuel “MIX GASOLINE”
Position: Fuel cap
The port to top up chain oil
Position: Oil cap
Setting the switch to the “ ” position, the engine starts.
Setting the switch to the “O” position, the engine stops immediately.
Position:
If you pull out the choke knob, you can set the choke as a cold start mode.
Position:
The screw under the “H” stamp is The
The screw under the “L” stamp is The
The screw at the left of the “T” stamp is the Idle adjustment screw.
Position: Left side of the rear handle
Shows the directions that the chain brake is released (white arrow) and activated (black arrow).
Position: Front of the chain cover
If you turn the knob by hand follow the arrow to the “MAX” position, the chain oil flow more, and if you turn to the “MIN” position, less. Position: Top of the cylinder cover