Telex Plasma Series manual Status Indicators

Page 7

Status Indicators

These indicators provide information about the actual operational state of the Plasma’s internal power amplifier.

Signal Indicates that an audio signal is present at the input and that it is output.

Limit When lit this indicator signals that the internal power amplifier actually operated at the threshold of clipping. Short-term blinking is not critical, because the amp’s audio limiter keeps distortion under control, so that the sound is unaffected. Input overdrive, which results in sound degradation, is a probable cause for a continuously lit indicator. To prevent this from happening, reduce the input level.

Protection There are two leds to indicate Speaker Protection, or Amplifier Protection. When Speaker is lit the voice coil protection circuit is in operation to prevent over powering the voice coil. Short term blinking indicates high average power of the program signal, sound is not affected. Amplifier indicates the amplifier thermal protection is engaged, this shuts down the amplifier and its sound output. It will reset automatically when its operating temperature is safe. If it occurs check the heatsink location to make sure it in a normal environment. It should not be in the path of very hot air.

Power Switch

AC switch for switching the Plasma’s power ON or OFF. The switch lights after turning the power ON. Make sure that the AC cord is correctly connected if the switch is not lit upon turning the power on. If the AC cord is correctly connected and the AC switch does not light upon power-on, please contact your local dealer.

AC Fuse

During normal operation the AC fuse of the Plasma only blows at the occurrence of a malfunction. Exchanging the fuse is only permissible using a fuse of the same type (current, voltage and release characteristic). In case the fuse blows frequently, please contact your local dealer.

AC Connector

AC connection is established via a PowerCon connector. A 15’ (5m) long AC cord with PowerCon plug is supplied.

AC Out

The PowerCon AC out socket allows the connection of additional Plasma Systems.

To prevent AC network overload, connecting more than 3 Plasma Systems to a single AC outlet (10A - 16A) is not recommended.

ELECTRO-VOICE®￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

6

Image 7
Contents Plasma Series Important Service Instructions Important Safety InstructionsTable of Contents Make sure to Safety FirstSystem Setup System Features PlasmaDescription P1 and P2 Amplifiers Input SignalStatus Indicators Setup Diagrams for Plasma Plasma P1 Rigging Using Plasma P1’s as Floor MonitorsSuspending Plasma P1 Speaker Systems Dimensions Plasma P1 SpecificationsDimensions Plasma P2 Subwoofer Block Diagrams ELECTRO-VOICE ELECTRO-VOICE ELECTRO-VOICE

Plasma Series specifications

The Telex Plasma Series represents a significant leap forward in the realm of high-definition audio technology, combining innovative design with cutting-edge features that cater to both audiophiles and casual listeners. One of the standout characteristics of the Plasma Series is its commitment to delivering exceptional sound clarity and precision across the entire audio spectrum. This range of products leverages advanced technologies to ensure that users experience music and sound as the artist intended.

At the heart of the Telex Plasma Series is its proprietary plasma technology, which utilizes ionization to create ultra-fast sound waves. This results in an extremely responsive audio output that captures even the most delicate nuances of a musical performance. This technology allows for a dynamic range that can reproduce low frequencies with powerful depth while maintaining crystal-clear high frequencies.

Another notable feature of the Plasma Series is its sleek and modern aesthetic, designed to complement any home or professional environment. The materials used in construction provide not only durability but also enhance the overall acoustic performance. Each unit is meticulously engineered to minimize resonance and distortion, ensuring that every note played is crisp and clear.

Connectivity is a primary consideration in the design of the Telex Plasma Series. The products support various input options, including Bluetooth, HDMI, and traditional RCA connections, allowing users to seamlessly integrate the systems into their existing setups. Additionally, the built-in equalizer settings enable personalized sound tuning, tailored to individual listening preferences and room acoustics.

Furthermore, the Telex Plasma Series is designed with energy efficiency in mind, delivering powerful performance without excessive power consumption. Many models incorporate smart technology that detects when the system is not in use, automatically entering a low-power standby mode.

In summary, the Telex Plasma Series combines groundbreaking plasma technology, elegant design, versatile connectivity, and energy efficiency to provide an unparalleled audio experience. Whether for enjoying music at home or in a professional setting, the Plasma Series stands out as a top choice for anyone seeking high-quality sound and innovation in their audio equipment.