Zenoah G3300EZ owner manual LpA LwA, dBA 112 dBA, GB-2

Page 2

G3300 / G3300EZ

EXPLANATION OF SYMBOLS AND SAFETY WARNINGS

Read operator's instruction

book before operating this

Wear head, eye and ear

machine.

protection.

Use the chain saw

Warning! Danger of

with two hands.

kickback.

Read, understand and follow all warnings.

WARNING!!!

RISK OF DAMAGING HEARING

IN NORMAL CONDITIONS OF USE, THIS MACHINE

MAY INVOLVE A DAILY LEVEL OF PERSONAL EXPOSURE TO NOISE

FOR THE OPERATOR EQUAL TO OR GREATER THAN

85 dB(A)

MODEL

SOUND LEVEL

VIBRATION LEVEL

 

EN 608-ISO 7182

2000/14/EC

EN 608-ISO 7505

 

LpA

LwA

Front handle

Rear handle

 

guaranteed

 

 

 

 

G3300

98.9 dB(A)

112 dB(A)

4.5 m/s2

4.9 m/s2

G3300EZ

 

 

 

 

APPROVAL NUMBER OF CE EXHAUST EMISSION REGULATION (2002/88/EC)

e13*97/68SH2G3*2002/88*0087*00

GB-2

Image 2
Contents G3300 / G3300EZ GB-1GB-2 LpA LwA98.9 dBA 112 dBA Contents For safe operation Kickback Safety Precau Tions for Chain SAW Users GB-5Position Oil cap Explanation of Symbols on the MachineInstalling Guide Bar and Saw Chain G3300G3300EZ Replace the guide plate when its file is worn GB-7Tighten the tensioner screw Tightening torque ~ 12.8 N·m 80~130kgf-cmFuel and Chain Oil Starting the Engine Adjusting the CarburetorOperating the Engine Checking the OIL SupplyChain Brake How to confirmSee Maintenance part for how to remove the cylinder cover Turn off the engineFelling a Tree SawingGuard Against Kickback Bucking and LimbingMaintenance Maintenance After Each USESpark plug Periodical Service Points Every 25 hours use Air cleanerFuel filter Cylinder finsReverse the bar occasionally to prevent partial wear Maintenance of Saw Chain and Guide BarSaw Chain Case 1. Starting failure Case 3. Oil does not come out Troubleshooting GuideCase 2. Lack of power/Poor acceleration/ Rough idling Power unit SpecificationsLimited warranty Cutting head