Zenoah CHT2301 manual  14 , Recommended Mixing Ratio Gasoline 50OIL, HOW to MIX Fuel

Page 14

6. Fuel

50:1 MIXING CHART

GASOLINE

gal.

1

2

3

4

5

 

 

 

 

 

 

2-CYCLE OIL fl.oz

2.6

5.2

7.8

10.4

13

 

 

 

 

 

 

 

 

 

 

 

 

 

 

GASOLINE

liter

1

2

3

4

5

 

 

 

 

 

 

 

2-CYCLE OIL

ml

20

40

60

80

100

 

 

 

 

 

 

 

14

WARNING

•Gasoline is very flammable. Avoid smoking or bringing any flame or sparks near fuel. Make sure to stop the engine and allow it cool before refueling the unit. Select outdoor bare ground for fueling and move at least 3m(10ft) away from the fueling point before starting the engine.

•The RedMax engines are lubricated by oil specially formulated for air-cooled 2-cycle gasoline engine use. If RedMax oil is not available, use an anti-oxidant added quality oil expressly labeled for air-cooled 2-cycle engine use. (JASO FC GRADE OIL or ISO EGC GRADE)

RECOMMENDED MIXING RATIO

GASOLINE 50:OIL 1

•Exhaust emission are controlled by the fundamental engine parameters and components(eq., carburation, ignition timing and port timing) without addition of any major hardware or the introduction of an inert material during combustion.

•These engines are certified to operate on unleaded gasoline.

•Make sure to use gasoline with a minimum octane number of 90 ROZ(USA/Canada : pump octane min.87)

•Unleaded gasoline is recommended to reduce the contamination of the air for the sake of your health and the environment.

•Poor quality gasolines or oils may damage sealing rings, fuel lines or fuel tank of the engine.

■HOW TO MIX FUEL

1.Measure out the quantities of gasoline and oil to be mixed.

2.Put some of the gasoline into a clean, approved fuel container.

3.Pour in all of the oil and agitate well.

4.Pour in the rest of gasoline and agitate again for at least one minute.

5.Put a clear indication on the outside of the

Page 13 Page 15
Image 14
Page 13 Page 15
Contents HT2301 CHT2301 Page Safety First ContentsParts location  4 CHT2301 SpecificationsHT2301  5 Wear head, eye and ear protection  6 Symbols on the machine  7 Working Circumstance For safe operationWorking Condition  8 Working Plan  9  10  Before Starting the EngineStarting the Engine Using the Product 11  12  MaintenanceIf Someone Comes  13  Handling FuelTransportation  14  HOW to MIX FuelFuel Recommended Mixing Ratio Gasoline 50OIL 15  Fueling the UnitFor Your Engine LIFE, Avoid 16  OperationOP1 OP2 OP3 Starting EngineStopping Engine OP2 Adjusting Idling SpeedOP4 OP5 Running in the Engine 18  HOW to USEOP6 OP7  19  OP8 OP9Hedge Trimming Techniques  20  MaintenanceMaintenance Chart  21  Cylinder fin Intake air cooling vent back MA4 MufflerIntake AIR Cooling Vent  22  23  Check Probable Causes Action Troubleshooting guideStorage  24 Parts list  25 Cutting Unit HT2301 S/N 100101 and up  26  27  Engine Unit HT2301 S/N 100101 and up  28  29  RCJ6YCutting Unit CHT2301 S/N 100101 and up  30  31  Engine Unit CHT2301 S/N 100101 and up  32  33  Manufacturer’s warranty coverage RedMax 2-YEAR Limited Warranty RedMax Garantie limitée à 2 ans

CHT2301, HT2301 specifications

The Zenoah HT2301 and CHT2301 are exceptional tools designed for professional landscaping and gardening applications. Renowned for their reliability and innovative engineering, these models deliver optimal performance for demanding tasks, making them a preferred choice among professionals in the industry.

One of the standout features of the HT2301 model is its powerful 22.5cc, 2-stroke engine. This engine is designed to offer a perfect balance of power and fuel efficiency, allowing users to tackle tough trimming and cutting tasks without frequent refueling interruptions. The engine's design emphasizes low emissions, aligning with environmental standards while providing solid power output.

The CHT2301, on the other hand, introduces the convenience of a high-quality, curved shaft design. This feature enhances maneuverability, giving users the advantage of reaching into tight spaces and cutting at various angles with ease. Both models incorporate a lightweight chassis, which significantly reduces operator fatigue during extended use. The ergonomic handles also contribute to user comfort, allowing for prolonged operation without discomfort.

Both models are equipped with advanced technology that enhances their overall performance. The cutting system features dual nylon strings, providing efficient and effective trimming results. The bump feed head mechanism allows for quick and easy line advancement, ensuring continuous operation without hassle. Additionally, the anti-vibration technology minimizes vibrations during use, promoting user comfort and reducing strain on the hands and arms.

Durability is also a core characteristic of the Zenoah HT2301 and CHT2301. Constructed with high-quality materials, these tools are built to withstand the rigors of professional use. The robust design ensures longevity and reliability, making them an investment that pays off over time.

In terms of maintenance, the Zenoah models are designed for easy servicing. The accessible air filter and spark plug make routine maintenance straightforward, allowing users to keep their equipment in top condition without excessive downtime.

In summary, the Zenoah HT2301 and CHT2301 are powerful and efficient tools that stand out in the market due to their innovative features and characteristics. With a focus on performance, comfort, and durability, they are ideal choices for professionals seeking reliable equipment for all their landscaping needs. Whether trimming grass, hedges, or navigating tight spaces, these models deliver the performance required to achieve excellent results in any landscaping project.
Top Page Image Contents