Zenoah CHT2301 manual OP4 OP5, Stopping Engine OP2, Running in the Engine, Adjusting Idling Speed

Page 17

7. Operation

OP4

OP5

NOTE

1.When restarting the engine immediately after stopping it, leave the choke open.

2.Overchoking can make the engine hard to start due to excess fuel. When the engine failed to start after several attempts, open the choke and repeat pulling the rope, or remove the spark plug and dry it.

■STOPPING ENGINE (OP2)

1.Release the throttle lever and run the engine for a half minute.

2.Shift the ignition switch to the “STOP” position.

IMPORTANT

•Except for an emergency, avoid stopping the engine while pulling the throttle lever.

IMPORTANT

RUNNING IN THE ENGINE

•During the first 20 working hours, do not use the hedge-trimmer at maximum power for long periods.

■ADJUSTING IDLING SPEED

•Before adjusting the carburetor, clean the air filter and warm up the engine. (OP4)

(1) air filter

•Idle screw is adjusted in order to ensure a good safety margin between idle running and clutch engagement. (OP5)

(1) Idle screw

WARNING

With the engine idling (3200 rpm), the blade should not rotate. We recommend that you have the dealer or an authorised mechanic carry out any carburetor adjustments.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents HT2301 CHT2301 Page Contents Safety First 4  Parts locationHT2301 SpecificationsCHT2301  5  6  Wear head, eye and ear protection 7  Symbols on the machineWorking Condition For safe operationWorking Circumstance  8  9  Working Plan 10  Before Starting the EngineStarting the Engine 11  Using the Product 12  MaintenanceIf Someone Comes  13  Handling FuelTransportation Fuel HOW to MIX Fuel 14  Recommended Mixing Ratio Gasoline 50OIL 15  Fueling the UnitFor Your Engine LIFE, Avoid OP1 OP2 OP3 Operation16  Starting EngineOP4 OP5 Adjusting Idling SpeedStopping Engine OP2 Running in the Engine 18  HOW to USEOP6 OP7  19  OP8 OP9Hedge Trimming Techniques  20  MaintenanceMaintenance Chart  21  Intake AIR Cooling Vent MA4 MufflerCylinder fin Intake air cooling vent back  22  23  Storage Troubleshooting guideCheck Probable Causes Action  24  25  Parts list 26  Cutting Unit HT2301 S/N 100101 and up 27   28  Engine Unit HT2301 S/N 100101 and upRCJ6Y  29  30  Cutting Unit CHT2301 S/N 100101 and up 31   32  Engine Unit CHT2301 S/N 100101 and up 33  Manufacturer’s warranty coverage RedMax 2-YEAR Limited Warranty RedMax Garantie limitée à 2 ans

CHT2301, HT2301 specifications

The Zenoah HT2301 and CHT2301 are exceptional tools designed for professional landscaping and gardening applications. Renowned for their reliability and innovative engineering, these models deliver optimal performance for demanding tasks, making them a preferred choice among professionals in the industry.

One of the standout features of the HT2301 model is its powerful 22.5cc, 2-stroke engine. This engine is designed to offer a perfect balance of power and fuel efficiency, allowing users to tackle tough trimming and cutting tasks without frequent refueling interruptions. The engine's design emphasizes low emissions, aligning with environmental standards while providing solid power output.

The CHT2301, on the other hand, introduces the convenience of a high-quality, curved shaft design. This feature enhances maneuverability, giving users the advantage of reaching into tight spaces and cutting at various angles with ease. Both models incorporate a lightweight chassis, which significantly reduces operator fatigue during extended use. The ergonomic handles also contribute to user comfort, allowing for prolonged operation without discomfort.

Both models are equipped with advanced technology that enhances their overall performance. The cutting system features dual nylon strings, providing efficient and effective trimming results. The bump feed head mechanism allows for quick and easy line advancement, ensuring continuous operation without hassle. Additionally, the anti-vibration technology minimizes vibrations during use, promoting user comfort and reducing strain on the hands and arms.

Durability is also a core characteristic of the Zenoah HT2301 and CHT2301. Constructed with high-quality materials, these tools are built to withstand the rigors of professional use. The robust design ensures longevity and reliability, making them an investment that pays off over time.

In terms of maintenance, the Zenoah models are designed for easy servicing. The accessible air filter and spark plug make routine maintenance straightforward, allowing users to keep their equipment in top condition without excessive downtime.

In summary, the Zenoah HT2301 and CHT2301 are powerful and efficient tools that stand out in the market due to their innovative features and characteristics. With a focus on performance, comfort, and durability, they are ideal choices for professionals seeking reliable equipment for all their landscaping needs. Whether trimming grass, hedges, or navigating tight spaces, these models deliver the performance required to achieve excellent results in any landscaping project.
Top Page Image Contents