Zenoah G2000 owner manual Troubleshooting Guide, Disposal, Case 1. Starting failure

Page 16

G2000

9. Troubleshooting Guide

Case 1. Starting failure

WARNING

Make sure the icing prevention system is not working.

Case 3. Oil does not come out

Check oil for sub-

a Replace.

standard quality.

Check fuel for water

a

fuel.Replace with proper

or substandard mix-

ture.

 

 

 

 

 

d

Check oil passage

and ports for clog- a Clean. ging.

d

Check for engine flooding.

d

Check spark ignition.

a

a

Remove and dry the spark plug.

Then pull the starter again with no choke.

Replace with a new plug.

If the unit seems to need further service, please consult with an authorized service shop in your area.

Case 2. Lack of power/Poor acceleration/ Rough idling

Check fuel for water

 

 

a

fuel.Replace with proper

or substandard mix-

ture.

 

 

 

 

 

 

 

d

Check air filter and fuel filter for clog- ging.

a

Clean.

d

Check carburetor for inadequate ad- justment.

a

Readjust speed needles.

10. Disposal

When you dispose of the machine, do not disas- semble the machine.

When you dispose of the machine, fuel, chain oil, be sure to follow your local regulations.

GB-16

Image 16
Contents G2000 GB-1Wear head, eye and ear protection Contents For safe operation Keep the handles dry, clean and free of oil or fuel mixtureAte the chain saw Kickback Safety Precautions For Chain SAW UsersWorse Effects of Vibration DisposalUsing the chainsaw in the tree General requirements working at heightPreparing to use the saw in the tree Securing the work position for two-handed useOne-hand use of the chainsaw Starting the saw in the treeFreeing a trapped saw Explanation of Symbols on the Machine Port to refuel MIX GasolinePosition Fuel cap Port to top up chain oilInstalling Guide Bar and Saw Chain Fuel and Chain Oil Adjusting the Carburetor Operating the EngineStarting the Engine Normal start Checking OIL SupplySawing Chain BrakeReleasing the Brake Stopping the EngineFelling a Tree Maintenance Maintenance of Saw Chain and Guide Bar SAW ChainGuide BAR Reverse the bar occasionally to prevent partial wearTroubleshooting Guide Case 2. Lack of power/Poor acceleration/ Rough idlingDisposal Case 1. Starting failureSpecifications Limited warrantyPower unit Cutting head