Zenoah G2000 owner manual Contents

Page 3

EC DECLARATION OF CONFORMITY

to Directive 2006/42/EC on machinery and to Directive 2004/108/EC on electromagnetic compatibility and to the regulations governing transposition internal control production.

Manufacturer

:

Husqvarna Zenoah Co., Ltd.

 

 

1-9 Minamidai, Kawagoe, Saitama, Japan

DECLARES THAT THE DESIGN OF THE MACHINE DESCRIBED BELOW.

Description

:

Chain Saw

Model

:

G2000

Serial no.

:

2010 000001 and up

Make

:

Husqvarna Zenoah

CONFORMS TO THE REQUIREMENTS OF THE MACHINERY DIRECTIVE (Directive 2006/42/EC) AND TO THE NATIONAL REGULATIONS GOVERNING ITS TRANSPOSITION ABROAD : AND

THAT IT HAS BEEN ISSUED WITH A CE CERTIFICATE (NO. M3 2992703 01) by TUV Rheinland Group - TUV Rheinland InterCert kft. Product Certification. H-1061 Budapest, Paulay Ede u. 52, Hungary

Date : 29 December 2009

Signature :

Kiyoshi Honda

General Manager, Development Center

Authorised representative :

Husqvarna AB

SE-561 82 Huskvarna, Sweden

Person authorised to compile the technical file :

Bengt Frögelius

SE-561 82 Huskvarna, Sweden

Contents

 

1.

For Safe Operation

4

2.

Explanation of Symbols on the Machine

8

3.

Installing Guide Bar and Saw Chain

9

4.

Fuel and Chain Oil

10

5.

Operating the Engine

11

6.

Sawing

12

7.

Maintenance

14

8.

Maintenance of Saw Chain and Guide Bar

15

9.

Troubleshooting Guide

16

10.

Disposal

16

11.

Specifications

17

G2000

G

B

GB-3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents GB-1 G2000Wear head, eye and ear protection Contents Keep the handles dry, clean and free of oil or fuel mixture For safe operationAte the chain saw Disposal Kickback Safety PrecautionsFor Chain SAW Users Worse Effects of VibrationSecuring the work position for two-handed use Using the chainsaw in the treeGeneral requirements working at height Preparing to use the saw in the treeStarting the saw in the tree One-hand use of the chainsawFreeing a trapped saw Port to top up chain oil Explanation of Symbols on the MachinePort to refuel MIX Gasoline Position Fuel capInstalling Guide Bar and Saw Chain Fuel and Chain Oil Checking OIL Supply Adjusting the CarburetorOperating the Engine Starting the Engine Normal startStopping the Engine SawingChain Brake Releasing the BrakeFelling a Tree Maintenance Reverse the bar occasionally to prevent partial wear Maintenance of Saw Chain and Guide BarSAW Chain Guide BARCase 1. Starting failure Troubleshooting GuideCase 2. Lack of power/Poor acceleration/ Rough idling DisposalCutting head SpecificationsLimited warranty Power unit
Top Page Image Contents