Zenoah EHT602D Operation, Starting Engine, Cutting head will start moving upon the engine starts

Page 10

eHT752S / eHT602D

7. Operation

STARTING ENGINE

WARNING

The cutting head will start moving upon the engine starts.

1.Feed fuel into the fuel tank and tighten the cap se- curely.

2.Rest the unit on a flat, firm place. Keep the cutting head off the ground and clear of surrounding objects as it will start moving upon starting of the engine.

3.Push the primer several times until overflown fuel flows out in the clear tube.

(a) Primer (b) Clear tube

4.When the engine is cool, move the choke lever to the closed position.

(a) Choke lever (b) Open (c) Close

5.Set the ignition switch to the “RUN” position.

(c)

(d)

(c)

d

b

b

 

 

 

 

a

a

 

 

(a) Throttle lever (b) Ignition switch (c) RUN (d) STOP

GB-10

6.While holding the unit firmly, pull out the starter rope quickly until engine fires.

IMPORTANT

•Avoid pulling the rope to its end or returning it by re- leasing the knob. Such actions can cause starter fail- ures.

7.Move the choke lever downward to open the choke. and restart engine.

8.Allow the engine to warm up for a several minutes before starting opertion.

NOTE

1.When restarting the engine immediately after stop- ping it, leave the choke open.

2.Overchoking can make the engine hard to start due to excess fuel. When the engine failed to start after several attempts, open the choke and repeat pulling the rope, or remove the spark plug and dry it.

STOPPING ENGINE

1.Release the throttle lever and run the engine for half a minute.

2.Shift the ignition switch to the “STOP” position.

IMPORTANT

•Except for an emergency, avoid stopping the engine while pulling the throttle lever.

NOTE

If the engine won't stop when setting the ignition switch to the stop position, close the choke lever and stop the engine.

In this case, please repair the machine at your nearest servicing dealer.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents EHT752S EHT602D Approval Number of CE Exhaust Emission Regulation Wear head, eye and ear protectionE13*97/68SH2G3*2002/88*0109*02 Contents Specification Parts locationSymbols on the machine Never modify your machineWorking Circumstance For safe operationWorking Condition Working PlanBefore Starting Engine Using the ProductStarting the Engine Handling Fuel MaintenanceIf Someone Comes TransportationFuel Cutting head will start moving upon the engine starts OperationStarting Engine Stopping EngineHedge Trimming Techniques Always follow the safety precautionsCutting Work Vertical cutBlade MaintenanceSharpening ANTI-VIBRATION System Safety LockStop operation when the safety lock is de- fective AIR FilterThrottle Wire Play Replacement Plug is a Champion RCJ6Y or NGK BPMR7AAdjusting Carburetor WAY of the Cooling AIRStorage DisposalLimited warranty Troubleshooting guideCheck Probable Causes Action

EHT752S, EHT602D specifications

Zenoah, renowned for its powerful and efficient outdoor power equipment, offers a range of high-performance products tailored for demanding tasks. Among them, the Zenoah EHT752S and EHT602D hedge trimmers stand out for their reliability and advanced features, making them ideal choices for both professionals and passionate gardeners.

The Zenoah EHT752S is a feature-rich hedge trimmer designed for robust performance. This model is equipped with a powerful 75cc engine, delivering exceptional cutting power while maintaining fuel efficiency. The precision-engineered double-sided blades provide a clean and precise cut, ensuring a neat finish for hedges and shrubs. The EHT752S also features an adjustable handle, allowing users to customize their grip for maximum comfort and control during operation. Its lightweight design minimizes fatigue during extended use, making it ideal for tackling larger trimming projects with ease.

On the other hand, the Zenoah EHT602D brings versatility to the forefront. Powered by a 60cc engine, it strikes a balance between power and efficiency. This model also boasts double-sided blades that are engineered for superior cutting ability, enabling it to tackle both thick and thin branches without compromising on performance. The EHT602D comes with an ergonomic design, including vibration-dampening technology that reduces user fatigue, making it a suitable option for prolonged usage.

Both models incorporate advanced technologies such as easy-start systems that reduce the effort required to start the engine, ensuring users can quickly and effortlessly begin their trimming tasks. Additionally, the low-emission engines adhere to environmental standards, making them eco-friendly choices for outdoor maintenance.

In terms of durability, Zenoah’s commitment to quality is evident in the construction of both the EHT752S and EHT602D. Built with robust materials, these hedge trimmers are designed to withstand harsh working conditions, ensuring longevity and reliability.

In conclusion, the Zenoah EHT752S and EHT602D hedge trimmers are exceptional tools tailored for users seeking efficient, powerful, and user-friendly equipment. With their advanced features, ergonomic designs, and commitment to quality, these models exemplify Zenoah's dedication to providing top-tier outdoor power solutions for every gardening enthusiast or professional landscaper.
Top Page Image Contents