Zenoah EHT752S, EHT602D Cutting Work, Hedge Trimming Techniques, Vertical cut, Horizontal cut

Page 11

7. Operation

CUTTING WORK

WARNING

•Weather conditions and altitude may effect carburation.

•Do not allow anyone to stay close to the hedge- trimmer while working or while adjusting the car- buretor.

HOW TO USE : HANDLE (eHT602D)

•To reduce fatigue when trimming hedges, the handle can be swivelled through 90° to the left or right.

•Do not press the throttle during this operation!

Proceed as follows:

1.Free the handle by pressing the locking lever.

2.Turn the handle until the locking lever clicks into place.

3.When the handle is locked in its new position, you can apply the throttle again.

(1)handle

(2)locking lever

•You can swivel the handle even with the engine idling because the hedge-trimmer is equipped with a blade brake that maintains the blades at a standstill.

■HEDGE TRIMMING TECHNIQUES

Trim sides of a hedge first, and then the top.

Vertical cut:

•With the single-sided blade hedge-trimmer, model eHT752S always cut from the bottom up.

•With the 2-sided blade model eHT602D use an arc- ing cut from the bottom upwards, then downwards to use both sides of the blades.

eHT752S / eHT602D

G

B

Horizontal cut:

•In order to get the best cutting results, slightly tilt the blade (5÷10°) towards the cutting direction.

Cut slowly, specially with thick hedges.

WARNING

Always follow the safety precautions.

The hedge-trimmer must only be used to trim hedges or small bushes. It is forbidden to cut other types of material. Do not use the hedge-trimmer as a lever to lift, move or break objects, nor lock it on fixed sup- ports. It is forbidden to apply tools or applications that are not the ones indicated by the manufacturer onto the hedge-trimmer’s power take-off. Do not use it for pruning trees or cutting grass.

•Use only as much throttle as is needed to do the job. Excessive engine speed is unnecessary.

•Avoid cutting thick branches, for which will damage the blades and shorten the life of drive systems.

•Tilting the trimmer 5 to 10° to the cutting object will make the job easy and bring a good result.

•Always keep your body to the carburetor side of your trimmer, never on the muffler side.

•When a new machine is first operated, in the first few minutes grease may come out of the gear case. But, since this is excess grease, there is no cause for alarm. Just wipe it off with the engine stopped for next use.

•Always remember that the TIP of the line does cut- ting. You will achieve better results by not crowding the line into the cutting area. Allow the unit to trim at its own pace.

GB-11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents EHT752S EHT602D E13*97/68SH2G3*2002/88*0109*02 Wear head, eye and ear protectionApproval Number of CE Exhaust Emission Regulation Contents Parts location SpecificationNever modify your machine Symbols on the machineWorking Plan For safe operationWorking Condition Working CircumstanceStarting the Engine Using the ProductBefore Starting Engine Transportation MaintenanceIf Someone Comes Handling FuelFuel Stopping Engine OperationStarting Engine Cutting head will start moving upon the engine startsVertical cut Always follow the safety precautionsCutting Work Hedge Trimming TechniquesSharpening MaintenanceBlade AIR Filter Safety LockStop operation when the safety lock is de- fective ANTI-VIBRATION SystemWAY of the Cooling AIR Replacement Plug is a Champion RCJ6Y or NGK BPMR7AAdjusting Carburetor Throttle Wire PlayDisposal StorageCheck Probable Causes Action Troubleshooting guideLimited warranty

EHT752S, EHT602D specifications

Zenoah, renowned for its powerful and efficient outdoor power equipment, offers a range of high-performance products tailored for demanding tasks. Among them, the Zenoah EHT752S and EHT602D hedge trimmers stand out for their reliability and advanced features, making them ideal choices for both professionals and passionate gardeners.

The Zenoah EHT752S is a feature-rich hedge trimmer designed for robust performance. This model is equipped with a powerful 75cc engine, delivering exceptional cutting power while maintaining fuel efficiency. The precision-engineered double-sided blades provide a clean and precise cut, ensuring a neat finish for hedges and shrubs. The EHT752S also features an adjustable handle, allowing users to customize their grip for maximum comfort and control during operation. Its lightweight design minimizes fatigue during extended use, making it ideal for tackling larger trimming projects with ease.

On the other hand, the Zenoah EHT602D brings versatility to the forefront. Powered by a 60cc engine, it strikes a balance between power and efficiency. This model also boasts double-sided blades that are engineered for superior cutting ability, enabling it to tackle both thick and thin branches without compromising on performance. The EHT602D comes with an ergonomic design, including vibration-dampening technology that reduces user fatigue, making it a suitable option for prolonged usage.

Both models incorporate advanced technologies such as easy-start systems that reduce the effort required to start the engine, ensuring users can quickly and effortlessly begin their trimming tasks. Additionally, the low-emission engines adhere to environmental standards, making them eco-friendly choices for outdoor maintenance.

In terms of durability, Zenoah’s commitment to quality is evident in the construction of both the EHT752S and EHT602D. Built with robust materials, these hedge trimmers are designed to withstand harsh working conditions, ensuring longevity and reliability.

In conclusion, the Zenoah EHT752S and EHT602D hedge trimmers are exceptional tools tailored for users seeking efficient, powerful, and user-friendly equipment. With their advanced features, ergonomic designs, and commitment to quality, these models exemplify Zenoah's dedication to providing top-tier outdoor power solutions for every gardening enthusiast or professional landscaper.
Top Page Image Contents