Kickback Safety Precautions | Zenoah EHT601D, EHT751S instruction

English

3. SAFETY PRECAUTIONS

■KICKBACK SAFETY PRECAUTIONS

•A dangerous reaction may occur when the spinning blade contacts a solid object in the critical area. It is called Kick back. As a result, the operator can lose control of the unit which can cause serious or fatal injury.

Avoid kickback, observe the safety precautions below strictly.

1.Keep the cutting blades clear of fances, posts, wires, and rocks to prevent kickback and damage to the blades.

2.When using your hedge-trimmer, do not grip other parts except the handles.

3.When using your hedge-trimmer, never take your eyes off. If you need to, place the throttle into the idling position.

4.When using your hedge-trimmer, do not let the unit get closer to your feet nor raise the unit above your waist.

■NOTES ON TRANSPORTATION a. Make sure the appropriate blade

cover is in place.

b. When transporting by car, fix the unit firmly using a rope. Do not transport by bicycle or motorbike because it is dangerous.

c. Never transport the hedge- trimmer over rough roads over long distances without first removing all fuel from the fuel tank, as doing so might cause fuel to leak from the tank.

■OPERATION SAFETY PRECAUTIONS a. Grip the handles of the hedge- trimmer firmly with both hands. If you suspend the work, place the

throttle into the idling position.

b. Always be sure to maintain a steady, even posture while working.

c. Maintain the speed of the engine at the level required to perform cutting work, and never raise the speed of the engine above the level necessary.