SERVICE AND ADJUSTMENTS
POSITION HANDLE
Select Handle height suitable for you and your tilling
conditions,Handle heightwill changewhen Tiller digsinto the soilo
TO ADJUST HANDLE:
•First loosen Handle Lock Lever (Fig, 26),,
•Handle can be positionedat different settingsbetween "HIGH" and "LOW" positions,
•Retighten Handle Lock Lever securely after adjusting°
"HIGH"
POSITION
HANDLE
LOCK
LEVER
FIGURE 26
TIRE CARE
BEADS ARE SEATED, OVERINFLA-
WHEN MOUNTING TIRES, UNLESS
TION CAN CAUSE AN EXPLOSION.
-Maintain 20 pounds ofTire pressure. IfTire pressures are not equal, Tiller will pull to one side.
•Keep Tires free of gasoline or oil which can damage rubber,,
WHEEL REMOVAL
To remove Wheel and Tire for repair:
•Place blocks under the Transmission to keep Tiller from tipping°
•Remove Hairpin Clip and Retaining Pin from Wheel (Fig.,
27).
" Remove Wheel and Tire,,
•Repair Tire and reassemble,
RETAINING
PIN
FIGURE 27
17