Maintenance | Stiga 82R2-H manual

GBENGLISH

7 MAINTENANCE

WARNING!Repairs must be carried out by the dealer. Otherwise the guarantee becomes invalid.

WARNING!Before carrying out repairs and maintenance, the spark plug con- nection must be disconnected.

7.3 Spark plug (1:Y)

The sparkplug must be replaced in the following cases.

•When the electrodes are burnt.

•If the porcelain insulator indicates damage.

•If the rotary cultivator is difficult to start.

The electrode gap should be 0.7-0.8 mm.

Use sparkplug Champion QC12YC or similar.

7.1 Periodic maintenance

Before each operation

•Check for fuel leaks.

•Check that all screws are tightened.

After each operation

•Clean the rotary cultivator.

•Check for fuel leaks.

Every 25 operating hours and every 3 months

•Check, clean or replace the air filter.

•Check that all screws and nuts are tightened.

7.2 Air filter (1:G)

Do not use flammable liquids when cleaning.

Serious engine damage can be caused if the machine is operated with a defective or blocked filter.

The paper filter must never be cleaning with liquid.

The machine is equipped with a pre-filter (foam rubber) and a main filter (paper).

Clean/replace the air filter every 3 months or every 25 operating hours. During operation in dry and dusty conditions, the air filter must be cleaned/re- placed every day.

Clean/replace the air filter as follows:

1.Undo the screws or locking tabs and the filter housing.

2.Grasp the main filter (paper) and shake it a few times against a hard surface or blow clean with compressed air from the inside out.

3.Wash the pre-filter (foam rubber) in liquid de- tergent and water. Then carefully twist the filter out and allow to dry.

4.When the pre-filter is dry, reinstall the filter in reverse order.

The filters must be replaced if very dirty or defec- tive.

7.4 Changing the oil

Change the oil the first time after 2 hours of oper- ation, and subsequently every 25 hours of opera- tion or at least once a season. Change oil when the engine is warm.

The engine oil may be very hot if it is drained off directly after the engine is shut off. So allow the engine to cool a few minutes before draining the oil.

1.Lean the machine slightly so that the oil drain- ing plug is the lowest point of the engine.

2.Unscrew the oil draining plug. See “4.10”.

3.Let the oil run out into a container.

4.Screw back the oil draining plug.

5.Fill with new oil: See “5.2”.

7.5 Cleaning

Never use high-pressure washing equip- ment when cleaning. This can cause wa- ter to penetrate between the seals and cause machine damage.

First brush off all dirt. Then wipe down the rotary cultivator using a damp cloth. The underside can be washed with water.

7.6 Fault-tracing

Fault: Difficult to start

Cause: The fuel is too old.

Action: Drain the tank and fill with fresh petrol.

Cause: Sparkplug fault.

Action: Replace spark plug.

Fault: Engine runs unevenly

Cause: Contaminated fuel.

Action: Clean the petrol tank and carburettor.

Cause: Sparkplug fault.

Action: Replace spark plug.

Fault: Weak engine, does not run at full throttle

Cause: Blocked air filter

Corrective action: Clean or replace the air filter.

Fault: Stops during operation

Cause: No fuel.

Action: Fill with petrol

82R2-H specifications

The Stiga 82R2-H is a highly efficient, versatile ride-on mower designed for both residential and semi-professional use. This mower stands out in the market due to its robust build and innovative technologies, making lawn maintenance easier and more enjoyable.

One of the key features of the Stiga 82R2-H is its powerful Briggs & Stratton engine, which provides reliable performance and ensures that the mower can tackle even the most demanding mowing jobs. The engine is designed for optimal fuel efficiency while delivering a strong torque, which makes it suitable for various grass types and terrains.

The 82R2-H is equipped with a substantial cutting deck that measures 82 cm. This width allows for efficient mowing in larger areas while maintaining maneuverability around obstacles like trees and gardens. The cutting height can be easily adjusted, offering customization to suit specific turf conditions or user preferences. The mower provides seven cutting heights, ranging from 25 mm to 80 mm, allowing for a precise cut that promotes healthy grass growth.

Another standout feature is the innovative dashboard, which provides users with clear information about the mower's performance and maintenance needs. The intuitive controls are ergonomic, making it simple for users to operate the mower with minimal effort.

The Stiga 82R2-H also integrates advanced technology, such as mulching capabilities. This feature enables users to finely chop the grass clippings and return them to the lawn as nutrient-rich mulch, supporting environmental sustainability and reducing waste.

Moreover, the construction of the mower emphasizes durability and longevity. Its rugged chassis is built to withstand the rigors of frequent use, and the high-quality materials ensure that it maintains its performance over time. Additionally, the mower has a compact design that allows it to navigate narrow paths and tight spaces effortlessly.

Comfort is a priority in the design of the Stiga 82R2-H. It features an adjustable seat, allowing users to find the most comfortable position while mowing, which is crucial for longer mowing sessions. The mower’s low center of gravity enhances stability, making it safer and easier to handle.

In conclusion, the Stiga 82R2-H ride-on mower is a powerful, feature-rich machine that combines performance and convenience. With its strong engine, adjustable cutting options, and user-friendly design, it is an excellent choice for anyone looking to maintain a beautiful lawn with less effort. Whether for residential or semi-professional use, the 82R2-H is poised to meet the diverse needs of its users.