Poulan 96092002100, RT900 Safety Rules, Training, Preparation, Operation, Maintenance and Storage

Page 2

SAFETY RULES

Safe Operation Practices for Walk-Behind Powered Rotary Tillers

TRAINING

Read the Manual carefully. Be thoroughly familiar with the controls and the proper use of the equipment. Know how to stop the unit and disengage the controls quickly.

Never allow children to operate the equipment. Never allow adults to operate the equipment without proper instruction.

Keep the area of operation clear of all persons, par- ticularly small children, and pets.

Never operate the tiller without proper guards, plates, or other safety protective devices in place.

Keep children and pets away.

Do not overload the machine capacity by attempting to till too deep at too fast a rate.

Never operate the machine at high speeds on slippery surfaces. Look behind and use care when backing.

Never allow bystanders near the unit.

Use only attachments and accessories approved by the manufacturer of the tiller.

PREPARATION

Thoroughly inspect the area where the equipment is to be used and remove all foreign objects.

Disengage all clutches and shift into neutral before starting the engine (motor).

Never operate the tiller without good visibility or light.

Be careful when tilling in hard ground. The tines may catch in the ground and propel the tiller forward. If this occurs, let go of the handlebars and do not restrain the machine.

Do not operate the equipment without wearing ade- quate outer garments. Wear footwear that will improve footing on slippery surfaces.

Handle fuel with care; it is highly flammable.

Use an approved fuel container.

Never add fuel to a running engine or hot engine.

Fill fuel tank outdoors with extreme care. Never fill fuel tank indoors.

Replace gasoline cap securely and clean up spilled fuel before restarting.

Use extension cords and receptacles as specified by the manufacturer for all units with electric drive motors or electric starting motors.

Never attempt to make any adjustments while the engine (motor) is running (except where specifically recommended by manufacturer).

OPERATION

Do not put hands or feet near or under rotating parts.

Exercise extreme caution when operating on or cross- ing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic. Do not carry passengers.

After striking a foreign object, stop the engine (motor), remove the wire from the spark plug, thoroughly inspect the tiller for any damage, and repair the damage before restarting and operating the tiller.

Exercise caution to avoid slipping or falling.

If the unit should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibration is generally a warning of trouble.

Stop the engine (motor) when leaving the operating position.

Take all possible precautions when leaving the machine unattended. Disengage the tines, shift into neutral, and stop the engine.

Before cleaning, repairing, or inspecting, shut off the engine and make certain all moving parts have stopped. Disconnect the spark plug wire, and keep the wire away from the plug to prevent accidental starting. Disconnect the cord on electric motors.

Do not run the engine indoors; exhaust fumes are dangerous.

2

MAINTENANCE AND STORAGE

Keep machine, attachments, and accessories in safe working condition.

Check shear pins, engine mounting bolts, and other bolts at frequent intervals for proper tightness to be sure the equipment is in safe working condition.

Never store the machine with fuel in the fuel tank inside a building where ignition sources are present, such as hot water and space heaters, clothes dryers, and the like. Allow the engine to cool before storing in any enclosure.

Always refer to the operator’s guide instructions for important details if the tiller is to be stored for an ex- tended period.

- IMPORTANT -

CAUTIONS, IMPORTANTS, AND NOTES ARE A MEANS OF ATTRACTING ATTENTION TO IMPORTANT OR CRITICAL INFORMATION IN THIS MANUAL.

IMPORTANT: USED TO ALERT YOU THAT THERE IS A POSSIBILITY OF DAMAGING THIS EQUIPMENT.

NOTE: Gives essential information that will aid you to better understand, incorporate, or execute a particular set of instructions.

Look for this symbol to point out im- portant safety precautions. It means CAUTION!!! BECOME ALERT!!! YOUR SAFETY IS INVOLVED.

CAUTION: Always disconnect spark plug wire and place wire where it can- not contact spark plug in order to pre- vent accidental starting when setting up, transporting, adjusting or making repairs.

WARNING

The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproduc- tive harm.

Image 2
Contents RT900 Training Safety RulesMaintenance and Storage PreparationTable of Contents Contents of Hardware Pack AssemblyTools Required for Assembly OPERATOR’S Position See FigUnpacking Carton See Fig Install Handle See Figs , 4,Staples when handling or disposing Cartoning material Be careful of exposedRemove Tiller from Crate Attach Clutch Cable See FigConnect Shift ROD See Fig Check Tire PressureKnow Your Tiller Meets Ansi Safety RequirementsOperation HOW to USE Your Tiller Check Engine OIL Level See Before Starting EngineTo Transport ADD GasolineCultivating Tine Shear PinsTilling Hints Lubrication Chart MaintenanceMaintenance Schedule General RecommendationsTo Change Engine OIL See Figs AIR Cleaner See FigEngine Muffler CleaningCooling System See Fig Spark PlugTire Care Service and AdjustmentsTiller Ground Drive Belt Adjustment See Fig To Replace Ground Drive Belt See FigTine Replacement See Figs , 25 To Adjust Carburetor Fuel System StorageOther Engine OILTroubleshooting Points Limited Warranty HOPService Notes Parts and Service Changere DE Pièces LES ET L’ENTRETIEN ’ENTRETIEN Remarques Limitée Garantie Dépannage DE Guide Mouillée trop est terre LaMoteur DE Huile EntreposageCylindres Dalimentation SystèmeRéglages ET Révision Carburateur LE Régler Pour24 .Fig 26 .Fig25 .Fig ’EN Courroie LA Remplacer Pour Fig la Voir Terre À D’ENTRAÎNEMENT Courroie LA Régler23 et 22 .Fig les Voir Terre À TraînementFig la Voir Guidon DU Hauteur LA Régler Pour MotobineuseFig la Voir Roue LA Enlever Pour Pneus DES SoinFig la Voir Entretien’ALLUMAGE Bougie SilencieuxLubrification MoteurFig la Voir AIR À Filtre Moteur Dhuile Remplacer PourLubrification Lubrification DE Tableau’ENTRETIEN Calendrier Utilisation Chaque AvantBinage UtilisationDents DES Cisaillement DE Boulons 15 .Fig Labourage DE Conseils’HUILE Moteur LE Remplir Moteur LE Démarrer Pour’ESSENCE Réservoir LE Remplir Transporter PourTesvi LES Changer DE Difficile C’EST Bineuse -MOTO Votre Utiliser CommentMENT/LESLESEU ROUES-AVANT Marche VI DE Changement DU Levier DU Indicateur Vitesse la commander de permet GAZ DES CommandeMotobineuse Votre Connaissez Pneu DE Pression LA Verifier MontagePoignee DE Hauteur Carton DU Motobineuse LA EnleverFig la Voir Carton LE Deballer Poignee LA InstallerEt 4, 3, .Fig les Voir Carton du Agrafes aux attention Faites AttentionMontage LE Pour Exiges Outils LES Pièces DES SAC DU ContenuFig la Voir D’OPERATEUR Position Sommaire Client DU ResponsabilitésMotobineuses des Sécurité toute Sécurité DE RèglesEntreposage ET Entretien En lUtilisation pour ConseilsCom.pro-poulan.www web site notre Visitez Avertissement
Related manuals
Manual 12 pages 28.52 Kb

RT900, 432121, 96092002100 specifications

The Poulan 96092002100, also known by its model number 432121 and referred to as RT900, is a versatile piece of outdoor power equipment engineered to meet the needs of both residential and professional users. This product falls within the category of string trimmers, offering a perfect blend of efficiency and ease of use for tackling grass, weeds, and overgrown areas around the yard.

One of the main features of the Poulan RT900 is its powerful 25 cc, 2-cycle engine, which provides ample cutting power while maintaining a lightweight design. This engine strikes a balance between performance and fuel efficiency, allowing users to complete tasks without the frequent need for refueling. The trimmer also employs a simple, user-friendly starting mechanism, making it accessible for individuals with varying levels of experience.

The RT900 is equipped with a dual line bump feed head. This feature allows users to easily advance the cutting line by bumping the head against the ground, thereby reducing downtime and increasing productivity. The dual line also enhances the cutting efficiency, ensuring that thicker grass and tougher weeds can be managed effortlessly.

Another notable characteristic of the Poulan RT900 is its adjustable assist handle, designed to provide optimal comfort during use. This feature allows users to customize the handle position to suit their height and grip preferences, significantly reducing user fatigue during extended operation. The lightweight construction of the trimmer further contributes to ease of maneuverability, ensuring that users can navigate around obstacles with minimal effort.

In addition to performance and comfort, the RT900 incorporates anti-vibration technology. This innovation reduces the amount of vibration transmitted to the user's hands and arms, promoting a more enjoyable and less physically taxing user experience. This is particularly beneficial for those who may be using the trimmer for prolonged periods.

Overall, the Poulan 96092002100,432121,RT900 is a robust and practical string trimmer that combines power, comfort, and advanced features. Its combination of a reliable engine, efficient cutting system, and user-friendly design makes it an ideal choice for homeowners and professionals alike, enabling them to maintain their outdoor spaces with ease and precision.