Poulan PRRT850 manual Tine Replacement See Figs , 25

SERVICE AND ADJUSTMENTS

TINE REPLACEMENT (See Figs. 24, 25, and 26)

CAUTION: Tines are sharp. Wear gloves or other protection when han- dling tines.

A badly worn tine causes your tiller to work harder and dig more shallow. Most important, worn tines cannot chop and shred organic matter as effectively nor bury it as deeply as good tines. A tine this worn needs to be replaced.

NEW TINE WORN TINE

FIG. 24

•To maintain the superb tilling performance of this machine the tines should be checked for sharpness, wear, and bending, particularly the tines which are next to the transmission. If the gap between the tines exceeds 3-1/2 inches (9 cm), they should be replaced or straightened as necessary.

•New tines should be assembled as shown in Fig. 26. Sharpened tine edges will rotate rearward from above.

	TRANSMISSION
	tine_3
TINE	TINE
3-1/2" MAX
(9 CM)

FIG. 25

		SHARP EDGE		HAIRPIN CLIP
		COUNTER
		TINE
		ROTATION
					HAIRPIN CLIP
				SHARP EDGES	SHARP EDGE
	05	0
02
		SHEAR PIN	SHARP	SHARP
				EDGES
			EDGE
				SHEAR PIN
				tine_13

FIG. 26

16