Poulan PPFT55 owner manual Unpack Carton & Install Handle See Fig, Handle Height, Tilling Width

Page 5

ASSEMBLY

UNPACK CARTON & INSTALL HANDLE (See Fig. 2)

CAUTION: Be careful of exposed staples when handling or disposing of cartoning material.

IMPORTANT: WHEN UNPACKING AND ASSEMBLING TILLER, BE CAREFUL NOT TO STRETCH OR KINK CABLE(S).

•Cut cable ties securing handles.

•Slowly lift handle assembly up, route cable(s) as shown and align handle holes with handle panel hole and slot.

•Loosely assemble hardware as shown. Be sure the shorter (1" long) hex bolt is assembled in lower hole of handle. Repeat for opposite side. Tighten all hard- ware securely.

•Cut cable ties securing tiller to skid and remove tiller from skid.

•Remove screws securing depth stake to skid and dis- card the screws.

LOCK

NUT WASHER TILLER

HANDLE

HANDLE

PANEL

HEX BOLT 5/16-18X1-1/4"

_38

FLAT

 

 

handles

 

HEX BOLT

WASHER

 

 

 

 

 

 

5/16-18X1"

 

 

02

051

 

 

 

CABLE(S)

HANDLE

PANEL

TILLERBOLTS HANDLES

FIG. 2

INSTALL DEPTH STAKE ASSEMBLY (See Fig. 3)

•Loosen nut “A”.

•Insert stake support between engine bracket halves with stake spring down.

•Bolt stake support to engine brackets with 5/16 x 1-1/4" bolts, lock washers and nuts.Tighten securely.Tighten nut “A”.

•Depth stake must move freely. If it does not, loosen support bolt.

depth_

ENGINE BRACKET

HALVES

stake_

NUT “A”

4

DEPTH

 

 

STAKE

 

DEPTH STAKE

 

SUPPORT

SUPPORT

BOLT

STAKE

SPRING

5/16 X 1-1/4 HEX BOLTS, LOCK WASHERS, AND HEX NUTS

FIG. 3

HANDLE HEIGHT

•Handle height may be adjusted to better suit operator. (See “HANDLE HEIGHT” in the Service and Adjust- ments section of this manual).

TILLING WIDTH

•Tilling width may be adjusted to better handle your tilling conditions (See “TINE ARRANGEMENT” in the Service and Adjustments section of this manual).

TINE OPERATION

•Check tine operation before first use. (See “TINE OP- ERATION CHECK” in the Service and Adjustments

section of this manual).

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Always Wear EYE Protection During Operation PPFT55Maintenance and Storage Safety RulesTraining PreparationTable of Contents OPERATOR’S Position See Fig AssemblyTools Required for Assembly Handle Height Unpack Carton & Install Handle See FigTilling Width Tine OperationKnow Your Tiller Meets Ansi Safety RequirementsOperation Stopping See Fig HOW to USE Your TillerTine Operation See Fig TillingTo Transport Before Starting EngineFill Engine with OIL See Fig ADD GasolineCultivating Breaking in Your TillerTilling Hints Lubrication Chart MaintenanceGeneral Recommendations Before Each USECooling System See Fig AIR Cleaner See FigEngine Tiller Service and AdjustmentsCleaning To Remove Belt Guard See Fig Tine Operation Check See FigTo Replace V-BELTS See Figs Final Check OFF PositionBelt Replacement To Adjust CarburetorBelt Removal Check Tine OperationOther StorageFuel System Engine OILTroubleshooting Points KEY Part Description Handle AssemblyBelt Guard and Pulley Assembly KEY Part NO. NO. Description Wheel and Depth Stake AssemblyTineipb3 Tine Assembly1716 Decals Service Notes

PPFT55 specifications

The Poulan PPFT55 is a powerful, user-friendly trimmer designed for homeowners and landscape enthusiasts looking to maintain their lawns and gardens effectively. This versatile tool is built to tackle a variety of cutting tasks, making it an indispensable addition to any outdoor equipment arsenal.

One of the standout features of the Poulan PPFT55 is its robust 25cc two-stroke engine. This engine provides ample power for tackling tough weeds and thick grass while remaining lightweight and easy to handle. The two-stroke design ensures efficient fuel combustion and contributes to lower emissions, making it environmentally friendly. With a maximum power output of 1 HP, users can expect excellent performance without compromising on ease of use.

The PPFT55 is equipped with a bump feed head that simplifies the process of line replacement. This feature allows users to easily extend the cutting line by simply tapping the head against the ground while operating the trimmer, eliminating the hassle of manual line feeding. The cutting width of 18 inches provides generous coverage, allowing users to complete their trimming tasks quickly and efficiently.

Another significant aspect of the Poulan PPFT55 is its lightweight design. Weighing in at just over 10 pounds, this trimmer is easy to maneuver, reducing user fatigue during extended periods of use. The adjustable curved shaft further enhances ergonomics, allowing users to customize the trimmer’s height for maximum comfort.

Additionally, the trimmer features an easy-start technology that reduces the effort needed to start the engine. This is particularly beneficial for those who may struggle with traditional pull-start systems. The PPFT55 is also equipped with a reliable primer bulb and choke for smooth starts, even in colder conditions.

Safety is also a priority with the Poulan PPFT55. The machine includes a protective shield to keep debris at bay while trimming, providing added peace of mind during operation.

In conclusion, the Poulan PPFT55 is a highly effective and convenient trimmer that combines a powerful engine, user-friendly features, and thoughtful design elements. Whether you are a novice gardener or a seasoned pro, this trimmer is an excellent choice for maintaining your outdoor spaces, ensuring that your lawn and garden always look their best.
Top Page Image Contents