Poulan PPFT55 HOW to USE Your Tiller, Stopping See Fig, Tine Operation See Fig, Tilling

Page 7

OPERATION

The operation of any tiller can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields before starting your tiller and while tilling. We recommend a wide vision safety mask for over spectacles or standard safety glasses.

HOW TO USE YOUR TILLER

Know how to operate all controls before adding fuel and oil or attempting to start engine.

STOPPING (See Fig. 5)

TINES

•Release forward tine control to stop forward move- ment.

•Release reverse tine control to stop reverse move- ment.

ENGINE

•Move throttle control to “STOP” position.

•Never use choke to stop engine.

 

 

 

 

 

FORWARD TINE CONTROL IN

 

 

 

 

REVERSE

“OFF” (UP) POSITION

 

 

 

 

 

 

 

 

 

CONTROL

 

 

 

 

 

 

FORWARD TINE CONTROL

 

 

 

 

 

IN “ON” (DOWN) POSITION

 

 

_

9

4

 

 

s

 

 

ndle

 

 

 

 

 

 

 

 

 

 

 

 

ha

 

 

 

 

 

 

 

 

 

 

THROTTLE

 

 

 

 

 

CONTROL

CHOKE

 

CONTROL

 

 

 

 

 

e

 

 

 

 

 

ngine_

 

 

 

 

 

art

 

 

 

 

 

_71

 

FIG. 5

TINE OPERATION (See Fig. 5)

FORWARD

•Squeeze forward tine control to handle.

REVERSE

•With forward tine control “OFF” (up) position, pull back and hold reverse tine control.

TILLING

The speed and depth of tilling is regulated by the position of the depth stake and wheel height.

The depth stake should always be below the wheels for digging. It serves as a brake to slow the tiller’s forward motion to enable the tines to penetrate the ground. Also, the more the depth stake is lowered into the ground the deeper the tines will dig.

DEPTH STAKE (See Fig. 6)

Adjust depth stake by removing the hairpin clip and clevis pin. Change depth stake to desired position. Replace the clevis pin and hairpin clip.

•For normal tilling, set depth stake at the second or third hole from the top.

WHEELS (See Fig. 6)

Adjust wheels by removing the hairpin clip and clevis pin. Change wheel position. Replace the hairpin clip and clevis pin.

•For normal tilling, set wheels at the second or third hole from the top.

depth_

HAIRPIN CLIP

AND CLEVIS PIN

stake

 

_

 

4

 

 

DEPTH

 

STAKE

 

STAKE

 

SPRING

 

WHEEL

FIG. 6

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Always Wear EYE Protection During Operation PPFT55Preparation Safety RulesMaintenance and Storage TrainingTable of Contents Tools Required for Assembly AssemblyOPERATOR’S Position See Fig Tine Operation Unpack Carton & Install Handle See FigHandle Height Tilling WidthOperation Meets Ansi Safety RequirementsKnow Your Tiller Tilling HOW to USE Your TillerStopping See Fig Tine Operation See FigADD Gasoline Before Starting EngineTo Transport Fill Engine with OIL See FigTilling Hints Breaking in Your TillerCultivating Before Each USE MaintenanceLubrication Chart General RecommendationsEngine AIR Cleaner See FigCooling System See Fig Cleaning Service and AdjustmentsTiller Final Check OFF Position Tine Operation Check See FigTo Remove Belt Guard See Fig To Replace V-BELTS See FigsCheck Tine Operation To Adjust CarburetorBelt Replacement Belt RemovalEngine OIL StorageOther Fuel SystemTroubleshooting Points KEY Part Description Handle AssemblyBelt Guard and Pulley Assembly KEY Part NO. NO. Description Wheel and Depth Stake AssemblyTineipb3 Tine Assembly1716 Decals Service Notes

PPFT55 specifications

The Poulan PPFT55 is a powerful, user-friendly trimmer designed for homeowners and landscape enthusiasts looking to maintain their lawns and gardens effectively. This versatile tool is built to tackle a variety of cutting tasks, making it an indispensable addition to any outdoor equipment arsenal.

One of the standout features of the Poulan PPFT55 is its robust 25cc two-stroke engine. This engine provides ample power for tackling tough weeds and thick grass while remaining lightweight and easy to handle. The two-stroke design ensures efficient fuel combustion and contributes to lower emissions, making it environmentally friendly. With a maximum power output of 1 HP, users can expect excellent performance without compromising on ease of use.

The PPFT55 is equipped with a bump feed head that simplifies the process of line replacement. This feature allows users to easily extend the cutting line by simply tapping the head against the ground while operating the trimmer, eliminating the hassle of manual line feeding. The cutting width of 18 inches provides generous coverage, allowing users to complete their trimming tasks quickly and efficiently.

Another significant aspect of the Poulan PPFT55 is its lightweight design. Weighing in at just over 10 pounds, this trimmer is easy to maneuver, reducing user fatigue during extended periods of use. The adjustable curved shaft further enhances ergonomics, allowing users to customize the trimmer’s height for maximum comfort.

Additionally, the trimmer features an easy-start technology that reduces the effort needed to start the engine. This is particularly beneficial for those who may struggle with traditional pull-start systems. The PPFT55 is also equipped with a reliable primer bulb and choke for smooth starts, even in colder conditions.

Safety is also a priority with the Poulan PPFT55. The machine includes a protective shield to keep debris at bay while trimming, providing added peace of mind during operation.

In conclusion, the Poulan PPFT55 is a highly effective and convenient trimmer that combines a powerful engine, user-friendly features, and thoughtful design elements. Whether you are a novice gardener or a seasoned pro, this trimmer is an excellent choice for maintaining your outdoor spaces, ensuring that your lawn and garden always look their best.
Top Page Image Contents