Crosley Radio CR79 Clock Operation CD Player & Connecting Optional Equipment, Timer-On Operation

Clock Operation

CD Player & Connecting Optional Equipment

Timer-On Operation

Example: “Set Timer-On for 7:05 am.”

APress “MODE” to timer-on display mode.

BPress “CLK-ADJ” to enter to timer-on hour adjustment mode.

CPress “FF / FB” to set desired hour. (e.g.12:00am 7:00am )

DPress “CLK-ADJ” to enter to timer-on minute - adjustment mode.

EPress “FF / FB” to set desired minute. (e.g. 7:00am 7:05am )

FPress “CLK-ADJ” to enter to recording source mode.

GFor Non-Timer-Recording, select ‘No-Src’. If Timer-Recording require select a particular source (CD/TUNER/PHONO).

HPress “CLK-ADJ” to return to timer-on display mode with activation of Timer-on function.

press”MODE” to Timer-on setting

press”CLK-ADJ”

enter to HOUR-ADJ mode

enter to	press”FF/FB” to		enter to source
MINUTE-ADJ	target me and then
mode	“CLK-ADJ”		selection
		press”FF/FB”
		to select
		source
		(CD/TUNER/
		PHONO)	end of Timer-on	press “CLK-ADJ”
		for syno-
		Rec only	adj

APress “TIMER” to deactivate (both icons flash) or activate (only ‘Timer’ flash ) Timer- on function.

Timer-on function activated

deactivatepress”TIMER” Timer-on function

CD stopped

enter to	press”PROG”
PROGRAM mode

	press”PROG”
enter to	press”PROG”
PROGRAM mode

press”PROG”

enter to

RE-PROGRAM press”FF OR FB” mode

press”PROG”

Random

AIn the stop or play mode, Press “RANDOM” to activate or deactivate the random function.

Notes:

1)It can work with “INTRO”, “REPEAT” and “REMAIN”.

2)The random function will not clear except press “STOP” twice or press “PROG” in STOP mode.

play without Random

Repeat

To repeat playback of a single track or the whole disk, press the “REPEAT” button. Pressing this button once will repeat only the selected track and a flashing "REPEAT" will appear on the display. Pressing the “REPEAT” button twice will repeat the whole CD when it reaches the end and repeat will appear but will not flash. Pressing “REPEAT” a third time will turn off the repeat function.

One track repeat (flashing) All track repeat

Optional External Speakers

1 With your new radio, you have the option of adding external speakers.

2 The speaker jacks for external speakers are located on the back of the radio. Along with the speaker jacks is a switch labeled int./ ext. When using external speakers, this switch must be switched to the ext. position. Doing this turns off the internal speakers in the radio and redirects the power to the external speakers.

3 If you decide not to use the external speakers, be sure the switch is on int. or the internal speakers will not work.

9

press “RANDOM”

play with Random

14

press “RANDOM”