Getting Started, Play, Stop, Unpacking, Set Up

Remove plastic safety cover from A/C plug.

Logic Deck

Play

Press the “TAPE/PLAY” button to enter logic deck mode.

a)In STOP/FWD/REW mode, press “TAPE PLAY” to start tape play

Notes: 1) Play only can perform in TAPE mode

In TAPE Mode

Start to play		press “TAPE PLAY”

Stop

AIn PLAY/REC/FWD/REW mode, press “TAPE STOP” to perform stop operation

Notes: 1) From tape recording to STOP mode, the “REC” icon will turn-off

AIn Stop mode, press “TAPE STOP” to reset the tape counter

In TAPE Mode (PLAY/FF/REW)		Tape Stopped

PLAY/FF/REW	Press “TAPE STOP” Reset tape		Press “TAPE STOP”
to stop		counter

Phono Mode manual recording

AIn Stop mode, press and hold “TAPE REC” 2sec to start the recording processes

Notes:

1)Tape must recordable

2)Tape must in Stop mode

3)Within the 2 sec key holding time, the “REC” icon will flash

4)During RECORDING mode, FWD/REW/PLAY.

5)Press “TAPE FORWORD” to change the LCD display to show tape counter display during Recording.

6)Press “TAPE REC” Key for Pause mode, during Recording and the “REC” icon will flash on the

LCD display

Phono Mode Tape recording

Tape Starts		press “TP_REC”
Recording		(hold 2s)

Tuner Mode manual record

AIn Stop mode, press and hold “TAPE REC” 2 sec to start the recording processes

Notes:

1)Tape must recordable

2)Tape must in stop mode

3)Within the 2 sec key holding time, the “REC” icon will flash

4)During RECORDING mode, FWD/REW/PLAY cannot execute

Unpacking

1 Remove packing materials from unit.

Note: Save all packing materials.

2 Remote control is located in the outside of the styrofoam packaging.

3 Remove plastic bag covering radio and remote control.

5 Remove tie from A/C cord and untie antenna wire on back of radio.

6 Open lid and remove styrofoam shipping material from turntable.

7 Remove black tie-wrap from under the tone arm.

8 Remove white protective needle cover by gently pulling towards the front of the unit.

Getting Started

Set Up

1 Install 2 AAA batteries (not included) in remote control.

2 Plug A/C cord into appropriate outlet.

Polarized Plug

Note: This product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other.) This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet try reversing the plug, if the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

3 Untie the FM antenna and allow it to hang down in a straight line for optimum FM reception. If you have trouble tuning in an FM station, move the external FM antenna for best reception. Do not connect FM antenna to outside antenna.

FM Antenna