Troy-Bilt E666M-Pony, 664D-Pony manual Decals, To Avoid Serious Injury

Page 5

 

Section 1: Safety

5

 

 

 

 

 

 

4. To reduce the chances of a fire

hazard, keep the engine free of grass,

leaves, or excessive grease.

5. Store gasoline in a cool, well-venti-

lated area, safely away from any spark-

or flame-producing equipment. Store

gasoline in an approved container,

safely away from the reach of children.

6. Refer to the Maintenance section of

this Manual and in the separate Engine

DECALS

For your safety and the safety of others, various safety message decals are on your unit (see Figure below). Keep the decals clean and legible at all times. Contact your local service dealer or the factory for

replacements if any decals are damaged or missing.

Refer to the Parts List pages for decal locations and part numbers.

Owner’s Manual for instructions if the

tiller is to be stored for an extended

period.

7. Never perform maintenance while

the engine is running or the spark plug

wire is connected, except when specifi-

cally instructed to do so.

8. If the fuel tank has to be drained, do

this outdoors.

Operating Symbols

Various symbols (shown here, with word descriptions) may be used on the tiller and engine.

STOP

FAST SLOW STOP

STOP

CHOKE

STOP START ON

Control Descriptions

Tine Warning (on right

side of hood flap)

Starting Stabilization (on top of engine or fuel tank)

Operating Instructions and

Warning Messages

Hot Surfaces/Moving Belts

(on top of belt cover)

Figure 1: Location of Safety and Operating Decals

CHOKE ROTATING

OFF TINES

R

REVERSE

WARNING

TO AVOID SERIOUS INJURY:

LEVER DIRECTION

TILLER DIRECTION

ENGAGED DISENGAGED

READ THE OWNER’S MANUAL.

KNOW LOCATIONS AND FUNCTIONS OF ALL CONTROLS.

KEEP ALL SAFETY DEVICES AND SHIELDS IN PLACE AND WORKING.

NEVER ALLOW CHILDREN OR UNINSTRUCTED ADULTS TO OPERATE TILLER.

SHUT OFF ENGINE AND DISCONNECT SPARK PLUG WIRE BEFORE MANUALLY UNCLOG- GING TINES OR MAKING REPAIRS.

KEEP BYSTANDERS AWAY FROM MACHINE.

KEEP AWAY FROM ROTATING PARTS.

USE EXTREME CAUTION WHEN REVERSING OR PULLING THE MACHINE TOWARDS YOU.

Image 5
Contents Operator’s Manual Customer Support Table of Contents Finding Model Number Safety Alert Symbol SafetyTraining PreparationSafety Maintenance and StorageKeep children and pets away Use slower engine speedsTo Avoid Serious Injury DecalsHardware BAG Parts List AssemblyIntroduction Inspect UnitAssistance Attach Reverse Clutch Control CableAttach Forward Clutch Control Cable Attach Wheel Gear Lever AssemblyCheck AIR Pressure in Tires Marked NegWheel Gear Lever Features and ControlsForward Clutch Control To Operate the Forward Clutch ControlEngine Controls Features and ControlsReverse Clutch Control Depth RegulatorOperation PRE-START ChecklistStarting and Stopping Engine BREAK-IN OperationOperation Operating the TillerStarting the Engine Stopping the EngineStopping the Tiller and Engine For reverse motion of the wheels and tinesChoosing correct wheel and tine speeds Tilling Tips & TechniquesTerrace Gardening Tilling across slopes without using terracesTilling up and down slopes Loading and Unloading the Tiller Power CompostingMaintenance Schedule MaintenanceCheck Hardware Check Tire PressureTransmission Gear OIL Service MaintenanceCheck for OIL Leaks To Check Transmission Gear Oil LevelEngine OIL Service Engine CleaningAIR Cleaner Service Spark Plug ServiceBolo Tines Wheel Gear Cable AdjustmentOFF Season Storage Cutting Edge Tine Checking and Adjusting Forward Clutch Belt TensionChecking Forward Belt Tension Checking and Adjusting Reverse Clutch Belt TensionRemoving Forward Clutch Belt Installing Forward Clutch BeltRemoving Reverse Clutch Belt Reverse Clutch Belt Removal and ReplacementInstalling Reverse Clutch Belt Battery Maintenance Problem Possible Cause Correction TroubleshootingROW MARKER- Model OEM-290-257 Bumper Model OEM-290-254HILLER/FURROWER Model OEM-290-251 TROY-BILT Tiller Lifetime Limited Warranty
Related manuals
Manual 40 pages 36.71 Kb Manual 40 pages 24.08 Kb