Troy-Bilt 665B, 664D For reverse motion of the wheels and tines, Stopping the Tiller and Engine

Page 13

Section 4: Operation 13

Figure 4-2: Use one hand to guide tiller when moving forward.

(b)As the tiller moves forward, relax and let the wheels pull the unit along while the tines dig. Walk behind and a little to one side of the tiller. Use a light but secure grip with one hand on the handlebars, but keep your arm loose. See Figure 4-2. Let the tiller move ahead at its own pace and do not push down on the han- dlebars to try and force the tiller to dig deeper – this takes weight off the wheels, reduces traction, and causes the tines to try and propel the tiller.

WARNING

Do not push down on the handlebars to try to make the tiller till more deeply. This prevents the wheels from holding the tiller back and can allow the tines to rapidly propel the tiller forward, which could result in loss of control, property damage, or personal injury.

5.For reverse motion of the wheels and tines:

(a)Look behind and exercise caution when operating in reverse. Do not till while in reverse.

(b)Stop all forward motion before reversing. Lift the handlebars with one hand until the tines are off the ground and then pull the Reverse Clutch Control knob out to engage reverse motion (see Figure 4-3). To stop reverse motion, let go of the Reverse Clutch Control knob.

Figure 4-3: Raise tines off ground and look behind when moving in reverse.

6.To Turn the Tiller Around:

(a)Practice turning the tiller in a level, open area. Be very careful to keep your feet and legs away from the tines.

(b)To make a turn, reduce the engine speed and then lift the handlebars until the engine and tines are bal- anced over the wheels (Figure 4-4).

(c)With the tiller balanced, push side- ways on the handlebar to move the tiller in the direction of the turn (Figure 4-5). After completing the turn, slowly lower the tines into the soil and increase the engine speed.

Stopping the Tiller and Engine

1.To stop the wheels and tines, release the Forward Clutch Control levers or the Reverse Clutch Control knob (whichever is engaged).

2.To stop the recoil start engine, move the Engine Throttle Control Lever to “STOP”. On electric start models, turn the ignition keyswitch to “OFF” to stop the engine.

WARNING

Before tilling, contact your telephone or utilities company and inquire if underground equipment or lines are used in your area. Their representative will be glad to answer your questions and tell you if any of their equipment or lines are buried underground on your property.

Turning the Tiller Around

Figure 4-4: To begin turn, reduce engine speed and lift handlebars until engine and tines are balanced over wheels.

Figure 4-5: With tiller balanced over wheels (and tines out of the ground), push handlebars sideways to turn tiller.

Image 13
Contents Operator’s Manual Finding Model Number Table of ContentsEngine Information Calling Customer SupportSafety Alert Symbol SafetyTraining PreparationSafety Maintenance and StorageKeep children and pets away Use slower engine speedsTo Avoid Serious Injury DecalsHardware BAG Parts List AssemblyIntroduction Inspect UnitAttach Forward Clutch Control Cable Attach Reverse Clutch Control CableAssistance Attach Wheel Gear Lever AssemblyCheck AIR Pressure in Tires Marked NegWheel Gear Lever Features and ControlsForward Clutch Control To Operate the Forward Clutch ControlEngine Controls Features and ControlsReverse Clutch Control Depth RegulatorOperation PRE-START ChecklistStarting and Stopping Engine BREAK-IN OperationOperation Operating the TillerStarting the Engine Stopping the EngineStopping the Tiller and Engine For reverse motion of the wheels and tinesChoosing correct wheel and tine speeds Tilling Tips & TechniquesTilling up and down slopes Tilling across slopes without using terracesTerrace Gardening Loading and Unloading the Tiller Power CompostingMaintenance Schedule MaintenanceCheck Hardware Check Tire PressureTransmission Gear OIL Service MaintenanceCheck for OIL Leaks To Check Transmission Gear Oil LevelEngine OIL Service Engine CleaningAIR Cleaner Service Spark Plug ServiceOFF Season Storage Wheel Gear Cable AdjustmentBolo Tines Cutting Edge Tine Checking and Adjusting Forward Clutch Belt TensionChecking Forward Belt Tension Checking and Adjusting Reverse Clutch Belt TensionRemoving Forward Clutch Belt Installing Forward Clutch BeltInstalling Reverse Clutch Belt Reverse Clutch Belt Removal and ReplacementRemoving Reverse Clutch Belt Battery Maintenance Problem Possible Cause Correction TroubleshootingHILLER/FURROWER Model OEM-290-251 Bumper Model OEM-290-254ROW MARKER- Model OEM-290-257 TROY-BILT Tiller Lifetime Limited Warranty
Related manuals
Manual 40 pages 7.54 Kb Manual 36 pages 52.26 Kb Manual 25 pages 52.34 Kb

E666M, 665B, 664D specifications

Troy-Bilt is a trusted name in outdoor power equipment, and their line of tillers, including the E666M, 664D, and 665B models, exemplifies their commitment to quality and practicality. These tillers are designed to make soil preparation easier and more efficient, catering to both amateur gardeners and seasoned landscapers alike.

The Troy-Bilt E666M is a robust machine tailored for ease of use and reliability. With a powerful engine, it delivers consistent performance, ensuring that users can tackle even the toughest soils. One of its standout features is the adjustable tilling width, which provides flexibility for various gardening needs. This tiller also boasts a Reverse Tillage feature, allowing the operator to break up stubborn soil with ease while enhancing control during operation.

The 664D model takes efficiency a step further with its durable construction and user-friendly design. This tiller is equipped with a dependable engine that provides ample power for deep soil cultivation. The 664D features self-propulsion technology, allowing users to maintain steady speed without exerting excessive effort. The adjustable depth settings further enhance soil penetration, making it possible to cultivate deep for extensive planting or surface till for lighter gardening tasks.

With the 665B, Troy-Bilt introduces advanced engineering for increased maneuverability and performance. This tiller features a patented belt-drive system that improves torque and ensures optimal power transfer to the tines. The 665B is also designed with comfort in mind, featuring ergonomic handles that reduce strain on the operator, making it ideal for longer gardening sessions. Its heavy-duty tines ensure exceptional soil mixing, while the adjustable tilling width and depth allow for customization according to specific gardening requirements.

All three tillers come equipped with Troy-Bilt's signature red oversized drag stake, enabling users to control tilling depth and improve stability during operation. They are designed with durable components that promise longevity and reliability, ensuring that they can withstand rigorous use season after season.

In summary, the Troy-Bilt E666M, 664D, and 665B tillers offer a variety of features and technologies that cater to every gardening need. With their reliable engines, user-friendly designs, and advanced tilling capabilities, these models embody the innovation and durability that Troy-Bilt is known for, making them excellent choices for anyone looking to elevate their gardening experience.