Troy-Bilt E66M PonyES Starting and Stopping Engine, BREAK-IN Operation, PRE-START Checklist

Page 11

WARNING

Before operating your machine, care- fully read and understand all safety (Section 1), controls (Section 3) and operating instructions (Section 4) in this Manual, in the separate Engine Owner’s Manual, and on the decals on the machine.

Failure to follow these instructions can result in serious personal injury.

INTRODUCTION

11

Section4 Operation

 

Reverse Clutch

 

Control

 

Forward Clutch

 

Wheel Gear Lever

 

Control Lever

 

 

 

 

 

 

 

Handlebar Height

Adjustment ScrewForward Clutch

Control Lever

Depth Regulator Lever

Engine Throttle

Control Lever

Figure 4-1: Location of main tiller controls.

Read this Section of the manual thor- oughly before you start the engine. Then, take the time to familiarize yourself with the basic operation of the tiller before using it in the garden.

Find an open, level area and practice using the tiller controls without the tines engaging the soil (put tines in “travel” setting). Only after you’ve become com- pletely familiar with the tiller should you begin using it in the garden.

BREAK-IN OPERATION

Perform the following maintenance after the first two hours of new operation (see “Maintenance” in this manual and the Engine Owner’s Manual).

1.Change engine oil.

2.Check for loose or missing hardware on unit. Tighten or replace as needed.

3.Check transmission gear oil level.

4.Check tension on forward clutch belt.

STARTING AND STOPPING

THE ENGINE

CAUTION

To help prevent serious personal injury or damage to equipment:

•Before starting engine, put Wheel Gear Lever in ENGAGE position.

•Before starting engine, put Forward Clutch Control levers and Reverse Clutch Control in neutral (disengaged) positions by releasing controls.

•Never run engine indoors or in enclosed, poorly ventilated areas. Engine exhaust contains carbon monoxide, an odorless and deadly gas.

•Avoid engine muffler and nearby

areas. Temperatures in these areas may exceed 150oF.

PRE-START CHECKLIST:

Make the following checks and perform the following services before starting the engine.

1.Read Sections 1 and 3 in this Manual. Read the separate Engine Owner’s Manual.

2.Check unit for loose or missing hard- ware. Service as required.

3.Check engine oil level. See Engine Owner’s Manual.

4.Check that all safety guards and covers are in place.

5.Check air cleaner and engine cooling system. See Engine Owner’s Manual.

6.Attach spark plug wire to spark plug.

DANGER

GASOLINE IS HIGHLY FLAMMABLE AND ITS VAPORS ARE EXPLOSIVE.

Follow gasoline safety rules in this manual (see Section 1) and in the sepa- rate Engine Owner’s Manual.

Failure to follow gasoline safety instruc- tions can result in serious personal injury and property damage.

7.Fill the fuel tank with gasoline accord- ing to the directions in the separate Engine Owner’s Manual. Follow all instructions and safety rules carefully.

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Operator’s Manual Calling Customer Support Table of ContentsFinding Model Number Engine InformationPreparation SafetySafety Alert Symbol TrainingUse slower engine speeds Maintenance and StorageSafety Keep children and pets awayTo Avoid Serious Injury DecalsInspect Unit AssemblyHardware BAG Parts List IntroductionAssistance Attach Reverse Clutch Control CableAttach Forward Clutch Control Cable Marked Neg AssemblyAttach Wheel Gear Lever Check AIR Pressure in TiresTo Operate the Forward Clutch Control Features and ControlsWheel Gear Lever Forward Clutch ControlDepth Regulator Features and ControlsEngine Controls Reverse Clutch ControlBREAK-IN Operation PRE-START ChecklistOperation Starting and Stopping EngineStopping the Engine Operating the TillerOperation Starting the EngineStopping the Tiller and Engine For reverse motion of the wheels and tinesChoosing correct wheel and tine speeds Tilling Tips & TechniquesTerrace Gardening Tilling across slopes without using terracesTilling up and down slopes Loading and Unloading the Tiller Power CompostingCheck Tire Pressure MaintenanceMaintenance Schedule Check HardwareTo Check Transmission Gear Oil Level MaintenanceTransmission Gear OIL Service Check for OIL LeaksSpark Plug Service Engine CleaningEngine OIL Service AIR Cleaner ServiceBolo Tines Wheel Gear Cable AdjustmentOFF Season Storage Cutting Edge Tine Checking and Adjusting Forward Clutch Belt TensionChecking Forward Belt Tension Checking and Adjusting Reverse Clutch Belt TensionRemoving Forward Clutch Belt Installing Forward Clutch BeltRemoving Reverse Clutch Belt Reverse Clutch Belt Removal and ReplacementInstalling Reverse Clutch Belt Battery Maintenance Problem Possible Cause Correction TroubleshootingROW MARKER- Model OEM-290-257 Bumper Model OEM-290-254HILLER/FURROWER Model OEM-290-251

E66M PonyES, 664Dpony, 665B Pro-line specifications

The Troy-Bilt E66M PonyES, 665B Pro-line, and 664D Pony represent a trio of robust lawn care solutions tailored for those seeking efficiency, durability, and cutting-edge features in their outdoor equipment. Each model is designed to tackle the unique challenges of yard maintenance while providing users with a comfortable and flexible experience.

The Troy-Bilt E66M PonyES stands out with its compact design, making it an ideal choice for residential lawns and tight spaces. Equipped with a reliable engine, this model offers exceptional power while maintaining fuel efficiency. The E66M features a 66-inch cutting deck that ensures a wide cutting path, significantly reducing mowing time. Its electric start capability adds convenience, allowing users to quickly get to work without the hassle of a pull cord. Additionally, the PonyES is designed with adjustable cutting heights, providing versatility for various grass types and conditions, ensuring a neat cut every time.

Next in line is the 665B Pro-line, engineered for more demanding tasks. This model is ideal for professional landscapers and homeowners with larger properties. The 665B boasts a more robust engine and enhanced durability, enabling it to handle challenging terrains with ease. With a significant cutting deck size of 66 inches, this model is optimized for speed and efficiency. The Pro-line features a heavy-duty transmission and a superior suspension system, which not only enhances maneuverability but also ensures a smooth ride over bumpy lawns. Its ergonomic design includes a comfortable seat and user-friendly controls, allowing operators to work for extended periods without fatigue.

Lastly, the 664D Pony offers a blend of power and versatility. Designed for those who appreciate performance without compromising on ease of use, this model features a 64-inch cutting deck that adeptly navigates various landscapes. The 664D is built with a high-performance engine, ensuring consistent power and reliability. Its durable construction and advanced cutting technology help to achieve a precise, professional-quality cut. The model also incorporates features like easy height adjustments and user-friendly handling, making it a favorite among both casual mowers and serious landscapers.

In summary, the Troy-Bilt E66M PonyES, 665B Pro-line, and 664D Pony are exemplary models that cater to a wide range of mowing needs. Each machine leverages innovative technologies, powerful engines, and thoughtful designs, ensuring that users experience efficiency and quality with every mowing session. Whether for a small garden or vast landscapes, these models are equipped to deliver exceptional performance and ease of use.
Top Page Image Contents