Troy-Bilt 664Dpony, 665B Pro-line Maintenance and Storage, Safety, Keep children and pets away

Page 4

4Section 1: Safety

7.Take all possible precautions when leaving the machine unattended. Stop the engine. Remove ignition key on electric start models. Disconnect spark plug wire and move it away from the spark plug. Move Wheel Gear Lever to ENGAGE.

8.Before cleaning, repairing, or inspect- ing, stop the engine, remove the ignition key on electric start models, and make certain all moving parts have stopped. Disconnect the spark plug wire and prevent it from touching the spark plug to prevent accidental starting. On electric start models, always remove the cable from the negative side (–) of the battery.

9.Always keep the tiller tine hood flap down, unless using the hiller/furrower attachment.

10.Never use the tiller unless proper guards, plates, or other safety protective devices are in place.

11.Do not run engine in an enclosed area. Engine exhaust contains carbon monoxide gas, a deadly poison that is odorless, colorless, and tasteless.

12.Keep children and pets away.

13.Never operate the tiller under engine power if the Wheel Gear Lever is in DISENGAGE (FREEWHEEL). In this position, the wheels will not hold the tiller back and the revolving tines could propel the tiller rapidly, possibly causing loss of control. Always move the Wheel Gear Lever to ENGAGE before starting the engine or engaging the tines/wheels with the Forward Clutch Control or the Reverse Clutch Control.

14.Be aware that the tiller may unex- pectedly bounce upward or jump forward if the tines should strike extremely hard packed soil, frozen ground, or buried obstacles like large stones, roots, or stumps. If in doubt about the tilling conditions, always use the following operating precautions to assist you in maintaining control of the tiller:

a.Walk behind and to one side of the tiller, using one hand on the han- dlebars. Relax your arm, but use a secure hand grip.

b.Use shallower depth regulator set- tings, working gradually deeper with each pass.

c.Use slower engine speeds.

d.Clear the tilling area of all large stones, roots and other debris.

e.Avoid using downward pressure on handlebars. If need be, use slight upward pressure to keep the tines from digging too deeply.

f.Before contacting hard packed soil at the end of a row, reduce engine speed and lift handlebars to raise tines out of the soil.

g.In an emergency, stop tines and wheels by releasing whichever Clutch Lever is engaged. Do not attempt to restrain the tiller.

15.Do not overload the tiller’s capacity by attempting to till too deeply at too fast a rate.

16.Never operate the tiller at high trans- port speeds on hard or slippery surfaces. Look behind and use care when backing up.

17.Do not operate the tiller on a slope that is too steep for safety. When on slopes, slow down and make sure you have good footing. Never permit the tiller to freewheel down slopes.

18.Never allow bystanders near the unit.

19.Only use attachments and acces- sories that are approved by the tiller manufacturer.

20.Use tiller attachments and acces- sories when recommended.

21.Never operate the tiller without good visibility or light.

22.Never operate the tiller if you are tired, or under the influence of alcohol, drugs or medication.

23.Operators shall not tamper with the engine-governor settings on the machine; the governor controls the maximum safe operating speed to protect the engine and all moving parts from damage caused by overspeed. Authorized service shall be sought if a problem exists.

24.Do not touch engine parts which may be hot from operation. Let parts cool down sufficiently.

25.The battery on electric start model tillers contains sulfuric acid. Avoid contact with skin, eyes, or clothing. Keep out of the reach of children.

Antidote–External Contact: Flush imme- diately with lots of water.

Antidote–Internal:Drink large quantities of water or milk. Follow with milk of magnesia, beaten eggs or vegetable oil. Call a doctor immediately.

Antidote–Eye Contact: Flush with water for 15 minutes. Get prompt medical attention.

26.Batteries produce explosive gases. Keep sparks, flame, and smoking materials away. Ventilate when charging batteries or when using a battery in an enclosed space. ALWAYS wear safety goggles when working near batteries.

27.Please remember: You can always stop the tines and wheels by releasing the Forward Clutch Control Lever or the Reverse Clutch Control knob (whichever control you have engaged), or by moving the Engine Throttle Control Lever (located on engine) to STOP on recoil start models or by turning the ignition key to OFF on electric start models.

28.To load or unload the tiller, see the instructions in Section 4 of this Manual.

29.Use extreme caution when reversing or pulling the machine towards you.

30.Start the engine carefully according to instructions and with feet well away from the tines.

31.Never pick up or carry a machine while the engine is running.

MAINTENANCE AND STORAGE

1.Keep the tiller, attachments and acces- sories in safe working condition.

2.Check all nuts, bolts, and screws at frequent intervals for proper tightness to be sure the equipment is in safe working condition.

3.Never store the tiller with fuel in the fuel tank inside a building where ignition sources are present such as hot water and space heaters, furnaces, clothes dryers, stoves, electric motors, etc. Allow engine to cool before storing in any enclosure.

Image 4
Contents Operator’s Manual Table of Contents Finding Model NumberEngine Information Calling Customer SupportSafety Safety Alert SymbolTraining PreparationMaintenance and Storage SafetyKeep children and pets away Use slower engine speedsDecals To Avoid Serious InjuryAssembly Hardware BAG Parts ListIntroduction Inspect UnitAttach Forward Clutch Control Cable Attach Reverse Clutch Control CableAssistance Assembly Attach Wheel Gear LeverCheck AIR Pressure in Tires Marked NegFeatures and Controls Wheel Gear LeverForward Clutch Control To Operate the Forward Clutch ControlFeatures and Controls Engine ControlsReverse Clutch Control Depth RegulatorPRE-START Checklist OperationStarting and Stopping Engine BREAK-IN OperationOperating the Tiller OperationStarting the Engine Stopping the EngineFor reverse motion of the wheels and tines Stopping the Tiller and EngineTilling Tips & Techniques Choosing correct wheel and tine speedsTilling up and down slopes Tilling across slopes without using terracesTerrace Gardening Power Composting Loading and Unloading the TillerMaintenance Maintenance ScheduleCheck Hardware Check Tire PressureMaintenance Transmission Gear OIL ServiceCheck for OIL Leaks To Check Transmission Gear Oil LevelEngine Cleaning Engine OIL ServiceAIR Cleaner Service Spark Plug ServiceOFF Season Storage Wheel Gear Cable AdjustmentBolo Tines Checking and Adjusting Forward Clutch Belt Tension Cutting Edge TineChecking and Adjusting Reverse Clutch Belt Tension Checking Forward Belt TensionInstalling Forward Clutch Belt Removing Forward Clutch BeltInstalling Reverse Clutch Belt Reverse Clutch Belt Removal and ReplacementRemoving Reverse Clutch Belt Battery Maintenance Troubleshooting Problem Possible Cause CorrectionHILLER/FURROWER Model OEM-290-251 Bumper Model OEM-290-254ROW MARKER- Model OEM-290-257

E66M PonyES, 664Dpony, 665B Pro-line specifications

The Troy-Bilt E66M PonyES, 665B Pro-line, and 664D Pony represent a trio of robust lawn care solutions tailored for those seeking efficiency, durability, and cutting-edge features in their outdoor equipment. Each model is designed to tackle the unique challenges of yard maintenance while providing users with a comfortable and flexible experience.

The Troy-Bilt E66M PonyES stands out with its compact design, making it an ideal choice for residential lawns and tight spaces. Equipped with a reliable engine, this model offers exceptional power while maintaining fuel efficiency. The E66M features a 66-inch cutting deck that ensures a wide cutting path, significantly reducing mowing time. Its electric start capability adds convenience, allowing users to quickly get to work without the hassle of a pull cord. Additionally, the PonyES is designed with adjustable cutting heights, providing versatility for various grass types and conditions, ensuring a neat cut every time.

Next in line is the 665B Pro-line, engineered for more demanding tasks. This model is ideal for professional landscapers and homeowners with larger properties. The 665B boasts a more robust engine and enhanced durability, enabling it to handle challenging terrains with ease. With a significant cutting deck size of 66 inches, this model is optimized for speed and efficiency. The Pro-line features a heavy-duty transmission and a superior suspension system, which not only enhances maneuverability but also ensures a smooth ride over bumpy lawns. Its ergonomic design includes a comfortable seat and user-friendly controls, allowing operators to work for extended periods without fatigue.

Lastly, the 664D Pony offers a blend of power and versatility. Designed for those who appreciate performance without compromising on ease of use, this model features a 64-inch cutting deck that adeptly navigates various landscapes. The 664D is built with a high-performance engine, ensuring consistent power and reliability. Its durable construction and advanced cutting technology help to achieve a precise, professional-quality cut. The model also incorporates features like easy height adjustments and user-friendly handling, making it a favorite among both casual mowers and serious landscapers.

In summary, the Troy-Bilt E66M PonyES, 665B Pro-line, and 664D Pony are exemplary models that cater to a wide range of mowing needs. Each machine leverages innovative technologies, powerful engines, and thoughtful designs, ensuring that users experience efficiency and quality with every mowing session. Whether for a small garden or vast landscapes, these models are equipped to deliver exceptional performance and ease of use.