Welcome
Thank you for purchasing the the Crosley Bubbler iJuke (CR16). Before operating this unit, please read this manual thoroughly and retain it for future reference.
About This Manual
Instuctions in this manual describe the control functions of the CR16.
Table of Contents
Getting Started |
|
Control Locators | 4,5 |
Unpacking | 6 |
Power Source | 6 |
Basic Operation |
|
Lights / Bubble Tubes | 7 |
Remote Control | 7 |
FM Stereo Operation | 7 |
Connecting Optional Equipment | |
External Speakers | 7 |
Auxiliary Inputs | 7 |
CD Operation |
|
CD Player | 8 |
Programmed CD Playback.. | 8 |
General |
|
Troubleshooting Guide | 9 |
Warranty | 10 |
CD Player
1
2 Push CD / RADIO BUTTON (26). The CD display will show (-
3 Press OPEN / CLOSE BUTTON (28) to open CD DRAWER (12) .
4 Insert CD in tray with the label side of CD facing up.
5 Press the OPEN / CLOSE BUTTON (28) again to close the CD DRAWER (12).
6 Press PLAY / PAUSE BUTTON (27) to begin playing the CD.
7 To stop playing, press the STOP BUTTON
(23).
8 To skip to a different track, press the BACK SKIP (22) or the FORWARD SKIP (30) button.
9 By pressing and holding either the BACK SKIP
(22)or FORWARD SKIP BUTTON (30), you can rewind or fast forward through each individual tack. The track will fast forward or rewind as long as you are holding the button. Once you let off the button, regular playback resumes.
10 During playback, you can use the repeat function to repeat a single song or the whole CD.
11 While the song you want to repeat is playing, press the REPEAT (24) button once. You will see the REPEAT INDICATOR (6) on the jukebox start to flash. The song will start over once it is finished.
12 Press the REPEAT (24) button a second time to repeat the whole CD. The REPEAT INDICATOR (6) will stay on without flashing.
13 Pressing the REPEAT (24) button a third time will disable the repeat function.
CD Operation
Programmed CD Playback
This CD player is programmable which allows you to program it to play only selected tracks. To program, follow the steps below.
1 Insert disc and close CD DRAWER (12). Do not press play yet.
2 Press the PROGRAM (25) button. The PROGRAM INCICATOR (5) on the jukebox will start to flash.
3 Use the BACK SKIP (22) or FORWARD SKIP BUTTON (30) to select a track you want to program.
4 Once you have selected a track, press the program button again. This stores the track into memory.
5 Use the BACK SKIP (22) or FORWARD SKIP BUTTON (30) to select the next track you want to program. Once selected, press the program button again.
6 Repeat step number 5 until you have
programmed all desired tracks.
7 Press PLAY / PAUSE BUTTON (27) to begin playing the selected tracks. The program light will stop flashing and the selected tracks will begin playing. They will play in the order that they were programmed.
8 Using the BACK SKIP (22) or FORWARD SKIP BUTTON (30) will only skip through the programmed tracks.
9 To clear programmed tracks, press the stop button twice until the program light goes out.
10 Programmed tracks will also be erased from memory when the CD DRAWER (12) is opened or when the power is turned off.
8