Handle BAR Adjustment, Transporting | Snapper EICFR5004B specs

Section 2 - OPERATING INSTRUCTIONS

PUSH FORWARD

TO CHOKE

CHOKE

LEVER

FIGURE 5

STEP 3: Move ENGINE SPEED CONTROL to FAST position.

STEP 4: Move to the right side of Tiller and place your foot on top of the right wheel (See starting procedure decal located on top of the tine cover), hold handle bar, then pull the ROPE STARTER HANDLE in smooth, steady motion until the engine starts. To prolong the life of the rope, guide the handle back to the engine rather than allowing it to snap back.

STEP 5: Allow a brief warm-up period, then move the CHOKE CONTROL rearward to RUN POSITION and the ENGINE SPEED CONTROL to the desired speed setting. Refer to the tilling procedure column on this page.

STEP 6: To STOP the engine, pull the ENGINE SPEED CONTROL on engine rearward into OFF position.

2.5 HANDLE BAR ADJUSTMENT

Remove retaining screw and nut from handle bar bracket. Adjust handle bar “UP” or “DOWN” as required. Reinstall screw and nut. See Figure 6.

LOW

MEDIUM

REMOVE

SCREW TOHIGH ADJUST

HANDLEBAR

HANDLE

BRACKET

FIGURE 6

2.6TRANSPORTING

2.6.1.FORWARD/REVERSE: To transport the Tiller to a new tilling site using its own power, raise the tines to clear lawn and paved surfaces to prevent gouging. Release the WHEEL and TINE CONTROL BAIL and lift the rear of the Tiller to take the weight off the DEPTH BAR (see Figure 7), then push the DEPTH BAR downward into notch setting that allows the tines to clear the ground surface. Place the WHEEL and TINE SHIFT LEVER in FWD or REV. Pull the WHEEL and TINE CONTROL BAIL back against the handlebar to engage the wheel drive and transport the unit.

2.6.2.To transport the Tiller to a new tilling site by pushing it, place the WHEEL and TINE SHIFT LEVER in the NEUTRAL position, and with the bail released, push the unit with the handle bar. The Tiller may be pushed with the engine running or shut off.

DEEP	DEPTH
ADJUST UP OR TILL	BAR
DOWN TO
DESIRED
TILLING DEPTH
SHALLOW
TILL
	PULL SPRING
	BACK TO
	RELEASE
	TENSION

FIGURE 7

2.7 TILLING PROCEDURE

Tines are engaged ONLY when the WHEEL and TINE SHIFT LEVER is in the FWD & FWD TIL or FWD & REV TIL position and the WHEEL and TINE CONTROL BAIL is held against the handle bar.

STEP 1: Set HANDLE BAR in desired position before beginning operation.

STEP 2: Set DEPTH BAR to desired position. Highest position is deepest depth. See Figure 7.

STEP 3: Move the ENGINE SPEED CONTROL to desired setting.

STEP 4: To start TILLING action, move the WHEEL and TINE SHIFT LEVER to the FWD & FWD TIL or FWD REV TIL position.

STEP 5: Engage the WHEEL and TINE CONTROL. Machine will start forward movement and tilling.

IMPORTANT: To STOP forward movement and tine rotation, release the wheel and tine control.

EICFR5004B specifications

The Snapper EICFR5004B is a versatile and reliable riding lawn mower designed for homeowners who demand performance and efficiency in their lawn care routine. This mower is engineered to provide a smooth, clean cut while ensuring ease of use and comfort during operation.

One of the standout features of the Snapper EICFR5004B is its powerful engine. It is equipped with a robust 500cc Briggs & Stratton engine that delivers reliable starting and plenty of power for tackling tough grass and uneven terrain. The engine is designed for efficiency, allowing users to complete their mowing tasks quickly, even on larger lawns.

The cutting system of the EICFR5004B is another highlight. The mower boasts a 42-inch cutting deck that provides a wide cutting path, reducing the number of passes needed to achieve a pristine lawn. The deck is constructed from durable materials, ensuring longevity and resistance to wear and tear. Additionally, it features a six-position height adjustment lever, which allows users to easily customize cutting heights between 1.5 inches and 4 inches to suit their lawn’s specific needs.

Comfort is a key consideration in the design of the Snapper EICFR5004B. The mower features an ergonomic seat with ample cushioning, providing a comfortable riding experience over extended periods. The controls are intuitively placed and easy to reach, allowing users to operate the mower without strain. The compact design also makes it easy to maneuver in tight spaces, such as around flower beds and trees.

Another significant technology integrated into the Snapper EICFR5004B is its SmartSpeed control system. This innovative feature allows users to control their speed with precision. It provides three different speed ranges for trimming, towing, and mowing, making it versatile for various tasks. This means users can adjust their speed without compromising on cutting performance or efficiency.

Maintenance is simplified with the EICFR5004B as well. The mower is designed with a removable deck, making it easy to clean and service. The engine compartment is also accessible, allowing users to perform routine maintenance tasks without extensive effort.

In conclusion, the Snapper EICFR5004B is built for performance, comfort, and convenience. With its powerful engine, versatile cutting system, and innovative speed control technology, it is well-suited for homeowners seeking a reliable riding mower that effaces the complexities of lawn maintenance. Its combination of features makes mowing not only easier but also more enjoyable, setting a new standard in residential lawn care solutions.