Engine, AIR Cleaner See Fig, Cooling System See Fig

MAINTENANCE

Disconnect spark plug wire before performing any maintenance (except carburetor adjustment) to prevent accidental starting of engine.

Prevent fires! Keep the engine free of grass, leaves, spilled oil, or fuel. Remove fuel from tank before tipping unit for maintenance. Clean muffler area of all grass, dirt, and debris.

Do not touch hot muffler or cylinder fins as contact may cause burns.

ENGINE

LUBRICATION

Use only high quality detergent oil rated with API service classification SG-SL. Select the oil’s SAE viscosity grade according to your expected temperature.

SAE VISCOSITY GRADES

							SAE 30
			5W-30

F	-20	0			30 32 40		60	80	100
C	-30	-20		-10	0	10	20	30	40

TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE

oil_visc_chart1_e

FIG. 11

NOTE: Although multi-viscosity oils (5W-30, 10W-30, etc.) improve starting in cold weather, these multi viscosity oils will result in increased oil consumption when used above 32°F (0°C). Check your engine oil level more frequently to avoid possible engine damage from running low on oil.

Change the oil after every 25 hours of operation or at least once a year if the tiller is not used for 25 hours in one year.

Check the crankcase oil level before starting the engine and after each five (5) hours of continuous use. Add SAE 30 motor oil or equivalent. Tighten oil filler plug securely each time you check the oil level.

TO CHANGE ENGINE OIL (See Figs. 11 and 12)

Determine temperature range expected before oil change. All oil must meet API service classification SG-SL.

•Be sure tiller is on level surface.

•Oil will drain more freely when warm.

•Catch oil in a suitable container.

•Remove drain plug.

•Tip tiller forward to drain oil.

•After oil has drained completely, replace oil drain plug and tighten securely.

•Remove oil filler plug. Be careful not to allow dirt to enter the engine.

•Refill engine with oil. See “CHECK ENGINE OIL LEVEL” in the Operation section of this manual.

	engine_
OIL	art_12
OIL
DRAIN
PLUG

OIL LEVEL

OIL FILLER

PLUG

AIR CLEANER (See Fig. 13)

Service air cleaner cartridge every twenty-five hours, more often if engine is used in very dusty conditions.

•Loosen air cleaner screws, one on each side of cover.

•Remove air cleaner cover.

•Carefully remove air cleaner cartridge. Be careful. Do not allow dirt or debris to fall into carburetor.

•Clean by tapping gently on a flat surface.

•If very dirty or damaged, replace cartridge.

•Clean and replace cover. Tighten screws securely.

CAUTION: Petroleum solvents, such as kerosene, are not to be used to clean cartridge. They may cause deterioration of the cartridge. Do not oil cartridge. Do not use pressurized air to clean or dry cartridge.

AIR CLEANER CARTRIDGE

COVER

AIR

CLEANER

SCREW

FIG. 13

COOLING SYSTEM (See Fig. 14)

Your engine is air cooled. For proper engine performance and long life keep your engine clean.

•Clean air screen frequently using a stiff-bristled- brush.

•Remove blower housing and clean as necessary.

•Keep cylinder fins free of dirt and chaff.

CYLINDER FINS

MUFFLER

BLOWER

HOUSING

AIR

SCREEN

engine_a rt_71

	FIG. 12	FIG. 14
	FIG. 12	11
		11

FT825 specifications

The Poulan FT825 is a robust and reliable tiller designed for homeowners and gardening enthusiasts who require a powerful tool for soil preparation. With a focus on durability and ease of use, the FT825 is engineered to make tilling tasks simpler and more efficient.

One of the main features of the Poulan FT825 is its 208cc four-stroke engine. This powerful engine delivers ample torque and performance, allowing for efficient tilling in various soil types. The four-stroke design ensures that the engine runs smoothly while maintaining lower emissions, making it an environmentally friendly choice.

The tiller features a durable steel frame that provides stability and support during operation. The frame is designed to withstand the rigors of heavy use, ensuring longevity and reliability over the years. Additionally, the FT825 comes with adjustable tilling width and depth settings, allowing users to customize their tilling experience based on specific gardening needs. The tilling width can be adjusted from 11 inches to 22 inches, making it versatile for different tasks.

Equipped with a set of rugged, spiral-tined tines, the FT825 can penetrate hard soil effortlessly, breaking up compacted earth for easier planting. These heavy-duty tines are designed to withstand tough conditions while providing exceptional soil mixing capabilities.

The Poulan FT825 also features ergonomic handles that are adjustable for user comfort. This design minimizes strain while tilling, enabling longer operation without discomfort. The integrated anti-vibration system further enhances user comfort by reducing the vibrations transmitted to the operator's hands.

Another notable technology is the easy-start system, which ensures that the engine starts with minimal effort. This is particularly beneficial for novice users who may struggle with traditional pull-start mechanisms.

For transport and storage, the FT825 is designed with foldable handlebars, which reduces its footprint and makes it easier to maneuver in tight spaces. This feature also simplifies the storage process, ensuring that the tiller can be conveniently stored when not in use.

In summary, the Poulan FT825 is a feature-rich tiller that combines power, durability, and user-friendly designs. With its robust engine, adjustable settings, and thoughtful technologies, it is an ideal choice for anyone looking to cultivate their garden effectively.