Poulan 417150, 96092001300 manual Service and Adjustments, Tiller, Tire Care

Page 14

SERVICE AND ADJUSTMENTS

CAUTION: Disconnect spark plug wire from spark plug and place wire where it cannot come into contact with plug.

TILLER

TO ADJUST HANDLE HEIGHT (See Fig. 20)

Select handle height best suited for your tilling conditions. Handle height will be different when tiller digs into soil.

•First loosen handle lock lever.

•Handle can be positioned at different settings between “HIGH” and “LOW” positions.

•Retighten handle lock lever securely after adjusting.

HANDLE

(HIGH POSITION)

HANDLE LOCK LEVER

HANDLE

(LOW POSITION)

FIG. 20

TIRE CARE

CAUTION: When mounting tires, un- less beads are seated, overinflation can cause an explosion.

•Maintain 20 PSI (1.4 kg/cm2) of tire pressure. If tire pressures are not equal, tiller will pull to one side.

•Keep tires free of gasoline or oil which can damage rubber.

TO REMOVE WHEEL (See Fig. 21)

•Place blocks under transmission to keep tiller from tipping.

•Remove outer side shield by removing nuts “A” and “B”.

•Remove inner side shield by removing nuts “C” and “D”.

•Remove hairpin clip and clevis pin from wheel.

•Remove wheel and tire.

•Repair tire and reassemble.

CLEVIS

 

PIN

 

NUT “C”

 

NUT

 

“D”

 

HAIRPIN

 

CLIP

 

NUT “B”

 

NUT “A”

INNER SIDE

OUTER SIDE

SHIELD

SHIELD

 

FIG. 21

TO REMOVE BELT GUARD (See Fig. 22)

NOTE: For ease of removal, remove hairpin clip and clevis pin from left wheel. Pull wheel out from tiller about 1 inch.

•Remove two (2) screws from side of belt guard.

•Remove hex nut and washer from bottom of belt guard (located behind wheel).

•Pull belt guard out and away from unit.

•Replace belt guard by reversing above procedure.

BELT GUARD

SCREW

AND WASHER

 

HEX NUT AND WASHER (LOCATED BEHIND TIRE)

SCREW

 

AND

HAIRPIN CLIP AND

WASHER

CLEVIS PIN

FIG. 22

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents PRRT850 ModelTraining Safety RulesMaintenance and Storage PreparationTable of Contents OPERATOR’S Position See Fig AssemblyTools Required for Assembly Install Handle See Figs , 4, Unpacking Carton See FigRemove Tiller from Crate Attach Clutch Cable See FigConnect Shift ROD See Fig Check Tire PressureKnow Your Tiller Meets Ansi Safety RequirementsOperation HOW to USE Your Tiller ADD Gasoline To TransportBefore Starting Engine Cultivating Tine Shear PinsTilling Hints Lubrication Chart MaintenanceMaintenance Schedule General RecommendationsAIR Cleaner See Fig EngineMuffler CleaningCooling System See Fig Spark PlugTire Care Service and AdjustmentsTiller Ground Drive Belt Adjustment See Fig To Replace Ground Drive Belt See FigsTine Replacement See Figs , 25, To Adjust Throttle Control Cable See Fig To Adjust CarburetorFuel System StorageOther Engine OILTroubleshooting Points Problem Cause CorrectionService Notes Limited Warranty Parts and Service

96092001300, 417150 specifications

The Poulan 96092001300,417150 is a powerful and reliable chainsaw designed for both professional users and home enthusiasts who require a robust tool for cutting wood, pruning trees, and handling various outdoor tasks. This model stands out for its impressive combination of features and technologies that streamline cutting tasks while ensuring user safety and comfort.

One of the key features of the Poulan 96092001300,417150 is its efficient engine. Powered by a 50cc 2-cycle engine, this chainsaw delivers significant horsepower and torque, allowing users to tackle both small and large jobs with ease. The engine's design emphasizes fuel efficiency, promising longer run times between refueling, which is essential for extended projects.

This model also incorporates a 20-inch cutting bar, providing an optimal balance between cutting capacity and maneuverability. The length is suitable for a variety of applications, allowing users to cut through large logs or perform detailed cuts on smaller branches. The chainsaw’s low-vibration technology enhances user comfort, reducing fatigue during operation and enabling greater precision and control.

Safety is a top priority with the Poulan 96092001300,417150. It features a chain brake that can be activated in the event of kickback, offering an additional layer of protection. The front handguard also provides safeguards against debris during cutting operations, ensuring a safer working environment.

Another notable characteristic of this chainsaw is its easy-start system, which reduces the effort needed to start the engine. The air filter is also readily accessible, which simplifies maintenance and ensures that the chainsaw operates at peak performance.

The Poulan 96092001300,417150 is designed with ergonomic handles that ensure a secure grip, providing increased maneuverability and comfort during prolonged use. The saw's lightweight construction balances power and portability, making it easier to handle for extended periods.

In summary, the Poulan 96092001300,417150 brings together power, safety, and user-friendly features. Its solid build and reliable performance make it a versatile tool for anyone needing a reliable chainsaw for their outdoor projects. Whether you are trimming branches, cutting firewood, or tackling larger limbs, this chainsaw proves to be an excellent choice for both experienced users and beginners alike.
Top Page Image Contents