Poulan 96092001300, 417150 manual Unpacking Carton See Fig, Install Handle See Figs , 4

Page 5

ASSEMBLY

UNPACKING CARTON (See Fig. 2)

CAUTION: Be careful of exposed staples when handling or disposing of cartoning material.

IMPORTANT: WHEN UNPACKING AND ASSEMBLING TILLER, BE CAREFUL NOT TO STRETCH OR KINK CABLES.

•While holding handle assembly, cut cable ties securing handle assembly to top frame and depth stake. Let handle assembly rest on tiller.

•Remove top frame of carton.

•Slowly ease handle assembly up and place on top of carton.

•Cut down right hand front and right hand rear corners of carton, lay side carton wall down.

•Remove packing material from handle assembly.

HANDLE

 

 

 

ASSEMBLY

 

 

 

 

 

 

3

 

 

_

 

n

 

 

to

 

 

ar

 

 

c

 

 

 

SHIFT ROD

FIG. 2

INSTALL HANDLE (See Figs. 3, 4, and 5)

•Insert one handle lock (with teeth facing outward) in gearcase notch. (Apply grease on smooth side of handle lock to aid in keeping lock in place until handle assembly is lowered into position.)

•Grasp handle assembly. Hold in “up” position. Be sure handle lock remains in gearcase notch. Slide handle assembly into position.

HANDLE ASSEMBLY "UP" POSITION

TIGHTEN HANDLE LOCK

LEVER TO HOLD

LOOSEN HANDLE

LOCK LEVER TO MOVE

FIG. 4

•Rotate handle assembly down. Insert rear carriage bolt first, with bolt head on L.H. side of tiller and loosely assemble locknut (See Fig. 5).

•Insert pivot bolt in front part of plate and tighten.

•Cut down remaining corners of carton and lay panels flat.

•Lower the handle assembly. Tighten nut on carriage bolt so handle moves with some resistance. This will allow for easier adjustment.

•Place flat washer on threaded end of handle lock lever.

•Insert handle lock lever through handle base and gearcase. Screw in handle lock lever just enough to hold lever in place.

•Insert second handle lock (with teeth inward) in the slot of the handle base (just inside of washer).

•With handle assembly in lowest position, securely tighten handle lock lever by rotating clockwise. Leav- ing handle assembly in lowest position will make it easier to remove tiller from carton.

VIEWED FROM R.H. SIDE OF TILLER

HANDLE ASSEMBLY

GEARCASE

NOTCH

HANDLE

LOCK

FIG. 3

GEARCASE

SLOT

CARRIAGE

BOLT

 

4

_3

dles

 

han

 

HANDLE

BASE

HANDLE LOCK

FLAT WASHER

HANDLE LOCK LEVER

PIVOT BOLT

LOCKNUT

FIG. 5

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Model PRRT850Maintenance and Storage Safety RulesTraining PreparationTable of Contents OPERATOR’S Position See Fig AssemblyTools Required for Assembly Unpacking Carton See Fig Install Handle See Figs , 4,Connect Shift ROD See Fig Attach Clutch Cable See FigRemove Tiller from Crate Check Tire PressureKnow Your Tiller Meets Ansi Safety RequirementsOperation HOW to USE Your Tiller ADD Gasoline To TransportBefore Starting Engine Cultivating Tine Shear PinsTilling Hints Maintenance Schedule MaintenanceLubrication Chart General RecommendationsEngine AIR Cleaner See FigCooling System See Fig CleaningMuffler Spark PlugTire Care Service and AdjustmentsTiller To Replace Ground Drive Belt See Figs Ground Drive Belt Adjustment See FigTine Replacement See Figs , 25, To Adjust Carburetor To Adjust Throttle Control Cable See FigOther StorageFuel System Engine OILProblem Cause Correction Troubleshooting PointsService Notes Limited Warranty Parts and Service

96092001300, 417150 specifications

The Poulan 96092001300,417150 is a powerful and reliable chainsaw designed for both professional users and home enthusiasts who require a robust tool for cutting wood, pruning trees, and handling various outdoor tasks. This model stands out for its impressive combination of features and technologies that streamline cutting tasks while ensuring user safety and comfort.

One of the key features of the Poulan 96092001300,417150 is its efficient engine. Powered by a 50cc 2-cycle engine, this chainsaw delivers significant horsepower and torque, allowing users to tackle both small and large jobs with ease. The engine's design emphasizes fuel efficiency, promising longer run times between refueling, which is essential for extended projects.

This model also incorporates a 20-inch cutting bar, providing an optimal balance between cutting capacity and maneuverability. The length is suitable for a variety of applications, allowing users to cut through large logs or perform detailed cuts on smaller branches. The chainsaw’s low-vibration technology enhances user comfort, reducing fatigue during operation and enabling greater precision and control.

Safety is a top priority with the Poulan 96092001300,417150. It features a chain brake that can be activated in the event of kickback, offering an additional layer of protection. The front handguard also provides safeguards against debris during cutting operations, ensuring a safer working environment.

Another notable characteristic of this chainsaw is its easy-start system, which reduces the effort needed to start the engine. The air filter is also readily accessible, which simplifies maintenance and ensures that the chainsaw operates at peak performance.

The Poulan 96092001300,417150 is designed with ergonomic handles that ensure a secure grip, providing increased maneuverability and comfort during prolonged use. The saw's lightweight construction balances power and portability, making it easier to handle for extended periods.

In summary, the Poulan 96092001300,417150 brings together power, safety, and user-friendly features. Its solid build and reliable performance make it a versatile tool for anyone needing a reliable chainsaw for their outdoor projects. Whether you are trimming branches, cutting firewood, or tackling larger limbs, this chainsaw proves to be an excellent choice for both experienced users and beginners alike.
Top Page Image Contents