Poulan 410237 manual HOW to USE Your Tiller, Tine Operation with Wheel Drive, Hard to Shift Gears

Page 8

OPERATION

The operation of any tiller can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields before starting your tiller and while tilling. We recommend a wide vision safety mask for over spectacles or standard safety glasses.

00155

HOW TO USE YOUR TILLER

Know how to operate all controls before adding fuel and oil or attempting to start engine.

STOPPING (See Fig. 9)

TINES AND DRIVE

•Release drive control bar to stop movement.

•Move shift lever to “N” (neutral) position.

ENGINE

•Move throttle control to “STOP” position.

•Never use choke to stop engine.

THROTTLESHIFT

CONTROLLEVER

DRIVE CONTROL

BAR “ENGAGED”

POSITION

DRIVE CONTROL BAR “DISENGAGED” POSITION

FIG. 9

TINE OPERATION - WITH WHEEL DRIVE

•Always release drive control bar before moving shift lever into another position.

•Tine movement is achieved by moving shift lever to either the counter rotating () till position or the forward rotat- ing () till position and engaging drive control bar.

FORWARD - WHEELS ONLY/TINES STOPPED

•Release drive control bar and move shift lever indicator to “F” (forward) position. Engage drive control bar and tiller will move forward.

REVERSE - WHEELS ONLY/TINES STOPPED

•DO NOT STAND DIRECTLY BEHIND TILLER.

•Release the drive control bar.

•Move throttle control to “SLOW” position.

•Move shift lever indicator to “R” (reverse) position.

•Hold drive control bar against the handle to start tiller movement.

HARD TO SHIFT GEARS

•Briefly engage drive control bar and release or rock tiller forward and backward until are able to shift gears.

DEPTH STAKE (See Fig. 10)

The depth stake can be raised or lowered to allow you more versatile tilling and cultivating, or to more easily transport your tiller.

TRANSPORT

SHALLOWESTPOSITION TILLING

(CULTIVATING)

DEEPEST

TILLING

DEPTH

STAKE

 

 

 

 

 

 

2

 

 

 

 

 

_

 

 

 

 

e

 

 

 

 

k

 

 

 

 

ta

 

 

 

 

s

 

 

 

 

_

 

 

 

 

 

h

 

 

 

 

 

 

dept

 

 

 

 

 

 

FIG. 10

DRAG STAKE (See Fig. 11)

The drag stake should be raised when tilling in the counter rotating () till position. The drag stake should be lowered when tilling in the forward rotating ()till position.

LOWERED (FORWARD ROTATING TILL)

RAISED

 

(COUNTER ROTATING

 

TILL)

_10

 

depth_stake

 

FIG. 11

TILLING (See Fig. 12)

•Release depth stake pin. Pull the depth stake up for increased tilling depth. Place depth stake pin in hole of depth stake to lock in position.

•Place shift lever indicator in counter rotating () till position .

•Hold the drive control bar against the handle to start tilling movement. Tines and wheels will both turn.

•Move throttle control to “FAST” position for deep tilling. To cultivate, throttle control can be set at any desired speed, depending on how fast or slow you wish to cultivate.

IMPORTANT: ALWAYS RELEASE DRIVE CONTROL BAR BEFORE MOVING SHIFT LEVER INTO ANOTHER POSITION.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents DRT875 Safety Rules Maintenance and StorageTraining PreparationTable of Contents Assembly Tools Required for AssemblyContents of Hardware Pack OPERATOR’S Position See FigInstall Handle See Figs , 4, Unpacking Carton See FigAttach Clutch Cable See Fig Connect Shift ROD See FigRemove Tiller from Crate Check Tire PressureKnow Your Tiller Meets Ansi Safety RequirementsOperation HOW to USE Your Tiller Tine Operation with Wheel DriveForward Wheels ONLY/TINES Stopped Reverse Wheels ONLY/TINES StoppedTurning CultivatingTo Transport Before Starting EngineTilling Hints See Fig ADD GasolineTo Start Engine Adjust Wheels for Cultivating See Figs Maintenance Maintenance ScheduleGeneral Recommendations Lubrication Chart Before Each USETo Change Engine OIL See Figs EngineAIR Filter See Fig Cleaning Cooling System See FigMuffler Spark PlugTire Care Service and AdjustmentsTiller Ground Drive Belt Adjustment See Fig To Replace Ground Drive Belt See FigsTine Replacement See Figs , 28 To Adjust Throttle Control Cable See Fig To Adjust CarburetorStorage OtherFuel System Engine OILShear pins broken Replace shear pins ConditionsGround too wet Wait for more favorable soil conditions Drive control bar is not engaged Engage drive controlLimited Warranty Parts and Service Changere DE Pièces LES ET L’ENTRETIEN 3E4 L5V Ontario MississaugaWay Fox Terry Contact CanadaDépannage DE Guide Avant en rotation de labourage de position la etEntreposage CylindresMoteur DE Huile Dalimentation SystèmeRéglages ET Révision MoteurCarburateur LE Régler Pour 30 .FIGFraises DES Remplacement 29 et 28, 27, .fig les Voir17 29 .FIG 28 .FIGFig la Voir Terre À D’ENTRAÎNEMENT Courroie LA Régler 26 et 25 .fig les VoirCourroie LA Remplacer Pour Terre À D’ENTRAÎNEMENTFig la Voir Roiecour DE Protecteur LE Enlever Pour Fig la Voir Roue LA Enlever PourFig la Voir Guidon DU Hauteur LA Régler PourEntretien ’ALLUMAGE BougieSilencieux Refroidissement DE SystèmeFig la Voir AIR À Filtre Lubrification21 .FIG 20 et 19 .fig les VoirUtilisation Chaque Avant Lubrification DE Tableau’ENTRETIEN Calendrier Binage Utilisation18 et 17 .fig Fig la Voir Moteur LE Démarrer Pour Labourage DE Conseils’ESSENCE Réservoir LE Remplir 14 .FIGExtérieurs Latéraux Déflecteurs ’HUILE Moteur LE RemplirTransporter Pour CultiverBineuse Moto Votre Utiliser CommentLES Changer DE Difficile C’EST LES Seulement ROUES-AVANT MarcheRéglages différents Motobineuse VotreMoteur le rermardé de permet Recul Démarrage DE Poignée Montage Fig la Voir SetesviPoignee LA Installer Et 4, 3, .fig les VoirFig la Voir Carton LE Deballer Coupez poignée, la de l’ensemble teniez vous que PendantPièces DES SAC DU Contenu Fig la Voir D’OPERATEUR PositionMontage LE Pour Exiges Outils LES De Clé 1 Pince 1 pneu à Manomètre 1 usage tout à CouteauRègles les toujours Observez .motobineuse votre SommaireClient DU Responsabilités Sécurité DE Règles Entreposage ET EntretienMotobineuses des Sécurité toute En lUtilisation pour ConseilsImportant Manuel

410237, 96092001000 specifications

The Poulan 96092001000,410237 is a premium chainsaw that has garnered attention from both amateur and professional users for its powerful performance and reliability. This model is designed for a variety of cutting tasks, making it suitable for everything from pruning trees to felling larger timber.

One of the standout features of the Poulan 96092001000 is its robust engine. The chainsaw is powered by a reliable two-stroke engine that delivers substantial horsepower, allowing for efficient cutting. Its engine is designed for reduced emissions, aligning with environmental standards while still providing the necessary power to handle tough jobs. Additionally, the starter mechanism is user-friendly, enabling users to start the saw effortlessly, even in cold conditions.

The chainsaw is equipped with a high-quality, durable chain that ensures smooth cutting through wood. Its bar length strikes a balance between maneuverability and cutting capacity. This makes the Poulan ideal for both detailed work in tight spaces and more extensive cutting tasks. The sharp chain is designed to self-lubricate, reducing wear and ensuring longevity, which is a vital aspect for those who intend to use the saw regularly.

Safety is paramount in chainsaw design, and the Poulan 96092001000 does not disappoint. It features a chain brake that activates when sudden pressure is applied, stopping the chain instantly to prevent accidents. The ergonomic handle design enhances user comfort and control, reducing fatigue during prolonged use. Additionally, the anti-vibration system significantly reduces handle vibrations, making it easier to control the saw over extended periods.

Another notable technology is the easy-access air filter and fuel system, which simplifies maintenance tasks. Users can quickly access these components for cleaning or replacement, contributing to the tool's longevity and performance consistency.

In summary, the Poulan 96092001000,410237 is a feature-rich chainsaw designed for both performance and user convenience. With its powerful engine, reliable cutting capabilities, superior safety features, and user-friendly maintenance options, this chainsaw is an excellent choice for anyone looking for a dependable cutting tool. Whether for professional forestry work or weekend gardening projects, the Poulan 96092001000 stands out as a top contender in its class, making it a worthwhile investment for both hobbyists and professionals alike.
Top Page Image Contents