Poulan 181121 Service and Adjustments, Tiller, To Adjust Handle Height See Fig, Tire Care

Page 14

SERVICE AND ADJUSTMENTS

CAUTION: Disconnect spark plug wire from spark plug and place wire where it cannot come into contact with plug.

TILLER

TO ADJUST HANDLE HEIGHT (See Fig. 20)

Select handle height best suited for your tilling conditions. Handle height will be different when tiller digs into soil.

•First loosen handle lock lever.

•Handle can be positioned at different settings between “HIGH” and “LOW” positions.

•Retighten handle lock lever securely after adjusting.

HANDLE

(HIGH POSITION)

HANDLE LOCK

LEVER

HANDLE

(LOW POSITION)

FIG. 20

TIRE CARE

CAUTION: When mounting tires, un- less beads are seated,overinflation can cause an explosion.

•Maintain 20 PSI (1.4 kg/cm2) of tire pressure. If tire pressures are not equal, tiller will pull to one side.

•Keep tires free of gasoline or oil which can damage rubber.

TO REMOVE WHEEL (See Fig. 21)

•Place blocks under transmission to keep tiller from tipping.

•Remove outer side shield by removing nuts “A” and “B”.

•Remove inner side shield by removing nuts “C” and “D”.

•Remove hairpin clip and clevis pin from wheel.

•Remove wheel and tire.

•Repair tire and reassemble.

CLEVIS

 

PIN

 

NUT “C”

 

NUT

 

“D”

 

HAIRPIN

 

CLIP

 

NUT “B”

INNER SIDE

NUT “A”

SHIELD

OUTER SIDE

SHIELD

 

FIG. 21

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents PRRT65B Training Safety RulesMaintenance and Storage PreparationTable of Contents OPERATOR’S Position See Fig AssemblyTools Required for Assembly Install Handle See Figs , 4, Unpacking Carton See FigRemove Tiller from Crate Attach Clutch Cable See FigConnect Shift ROD See Fig Check Tire PressureKnow Your Tiller Meets Ansi Safety RequirementsOperation Forward Wheels ONLY/TINES Stopped HOW to USE Your TillerTine Operation with Wheel Drive Reverse Wheels ONLY/TINES StoppedBefore Starting Engine TurningTo Transport ADD GasolineCultivating Tine Shear PinsTilling Hints General Recommendations Lubrication Chart MaintenanceMaintenance Schedule Before Each USEEngine AIR Filter See FigMuffler CleaningCooling System See Fig Spark PlugTiller Service and AdjustmentsTo Adjust Handle Height See Fig Tire CareTo Replace Ground Drive Belt See Figs Ground Drive Belt Adjustment See FigTo Remove Belt Guard See Fig Tine Replacement See Figs , 25, To Adjust Throttle Control Cable See Fig To Adjust CarburetorFuel System StorageOther Engine OILTroubleshooting Points Handle Assembly Tiller - Model Number PRRT65BMAINFRAME, Left Side KEY Part NO. NO. DescriptionMAINFRAME, Right Side 166532 BumperTransmission Tine Shield Tine Assembly Decals Limited Warranty Parts and Service

181121 specifications

The Poulan 181121 is a versatile and powerful tool designed for homeowners and professionals alike, especially those in need of a reliable chainsaw for various cutting tasks. Known for its user-friendly design and impressive performance, this chainsaw stands out in the crowded market of outdoor power equipment.

One of the key features of the Poulan 181121 is its robust engine. Powered by a 18-inch bar and a reliable 42cc 2-cycle engine, this chainsaw delivers strong cutting power, making it suitable for a range of applications including tree trimming, firewood cutting, and tackling larger fallen branches. The combination of engine power and bar length ensures efficient performance, allowing users to handle even challenging jobs with ease.

Another noteworthy characteristic of the Poulan 181121 is its ergonomic design. The chainsaw is equipped with an anti-vibration handle, helping to reduce user fatigue during extended use. This feature is particularly beneficial for those who may spend long hours handling the tool, as it enhances comfort and control. Additionally, the chainsaw is lightweight, which further contributes to its ease of handling.

The Poulan 181121 also incorporates several advanced technologies that enhance its usability and longevity. One such technology is the automatic oiling system, which ensures that the bar and chain remain adequately lubricated during operation. This not only prolongs the life of the chainsaw but also improves cutting efficiency and reduces wear and tear.

Moreover, maintenance is made simple with the easy-access air filter and tool-less chain tension adjustment features. These innovations allow users to maintain their chainsaw with minimal hassle, ensuring that they can get back to work quickly and efficiently.

Finally, the Poulan 181121 prioritizes safety, featuring a safety chain brake that minimizes the risk of accidents during use. The combination of safety features and effective design makes this chainsaw a responsible choice for both new and experienced users.

In summary, the Poulan 181121 offers a perfect blend of power, comfort, and convenience. With its efficient engine, ergonomic design, and advanced technologies, it is an ideal choice for anyone looking to tackle outdoor cutting tasks. Whether for personal use or professional landscaping, the Poulan 181121 proves to be a reliable and robust chainsaw that stands up to the job.
Top Page Image Contents