Poulan 181121 owner manual To Remove Belt Guard See Fig, To Replace Ground Drive Belt See Figs

Page 15

SERVICE AND ADJUSTMENTS

TO REMOVE BELT GUARD (See Fig. 22)

NOTE: For ease of removal, remove hairpin clip and clevis pin from left wheel. Pull wheel out from tiller about 1 inch.

•Remove two (2) screws from side of belt guard.

•Remove hex nut and washer from bottom of belt guard (located behind wheel).

•Pull belt guard out and away from unit.

•Replace belt guard by reversing above procedure.

BELT GUARD

SCREW

AND WASHER

 

HEX NUT AND WASHER (LOCATED BEHIND TIRE)

SCREW

 

AND

HAIRPIN CLIP AND

WASHER

CLEVIS PIN

FIG. 22

ENGINE

PULLEY

IDLER

PULLEYTRANSMISSION

PULLEY

TO REPLACE GROUND DRIVE BELT (See Figs. 22 and 23)

•Remove belt guard as described in “TO REMOVE BELT GUARD”.

•Remove old belt by slipping off engine pulley first then remove from transmission pulley.

•Place new belt in groove of transmission pulley and into engine pulley. BELT MUST BE IN GROOVE ON TOP OF IDLER PULLEY. NOTE POSITION OF BELT TO GUIDES.

•Check belt adjustment as described below.

•Replace belt guard.

•Reposition wheel and replace clevis pin and hairpin clip.

GROUND DRIVE BELT ADJUSTMENT (See Fig. 23)

For proper belt tension, the extension spring should have about 5/8 inch (16 mm) stretch when drive control bar is in “ENGAGED” position. This tension can be attained as follows:

•Loosen cable clip screw securing the drive control cable.

•Slide cable forward for less tension and rearward for more tension until about 5/8 inch (16 mm) stretch is obtained while the drive control bar is engaged.

•Tighten cable clip screw securely.

CABLE CLIP

SCREW

DRIVE

CONTROL

CABLE

LESS

TENSION

 

 

MORE

5/8"

 

TENSION

EXTENSION

SPRING

FIG. 23

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents PRRT65B Preparation Safety RulesMaintenance and Storage TrainingTable of Contents Assembly Tools Required for AssemblyOPERATOR’S Position See Fig Unpacking Carton See Fig Install Handle See Figs , 4,Check Tire Pressure Attach Clutch Cable See FigConnect Shift ROD See Fig Remove Tiller from CrateMeets Ansi Safety Requirements OperationKnow Your Tiller Reverse Wheels ONLY/TINES Stopped HOW to USE Your TillerTine Operation with Wheel Drive Forward Wheels ONLY/TINES StoppedADD Gasoline TurningTo Transport Before Starting EngineTine Shear Pins Tilling HintsCultivating Before Each USE MaintenanceMaintenance Schedule General Recommendations Lubrication ChartAIR Filter See Fig EngineSpark Plug CleaningCooling System See Fig MufflerTire Care Service and AdjustmentsTo Adjust Handle Height See Fig TillerGround Drive Belt Adjustment See Fig To Remove Belt Guard See FigTo Replace Ground Drive Belt See Figs Tine Replacement See Figs , 25, To Adjust Carburetor To Adjust Throttle Control Cable See FigEngine OIL StorageOther Fuel SystemTroubleshooting Points Tiller - Model Number PRRT65B Handle AssemblyKEY Part NO. NO. Description MAINFRAME, Left Side166532 Bumper MAINFRAME, Right SideTransmission Tine Shield Tine Assembly Decals Limited Warranty Parts and Service

181121 specifications

The Poulan 181121 is a versatile and powerful tool designed for homeowners and professionals alike, especially those in need of a reliable chainsaw for various cutting tasks. Known for its user-friendly design and impressive performance, this chainsaw stands out in the crowded market of outdoor power equipment.

One of the key features of the Poulan 181121 is its robust engine. Powered by a 18-inch bar and a reliable 42cc 2-cycle engine, this chainsaw delivers strong cutting power, making it suitable for a range of applications including tree trimming, firewood cutting, and tackling larger fallen branches. The combination of engine power and bar length ensures efficient performance, allowing users to handle even challenging jobs with ease.

Another noteworthy characteristic of the Poulan 181121 is its ergonomic design. The chainsaw is equipped with an anti-vibration handle, helping to reduce user fatigue during extended use. This feature is particularly beneficial for those who may spend long hours handling the tool, as it enhances comfort and control. Additionally, the chainsaw is lightweight, which further contributes to its ease of handling.

The Poulan 181121 also incorporates several advanced technologies that enhance its usability and longevity. One such technology is the automatic oiling system, which ensures that the bar and chain remain adequately lubricated during operation. This not only prolongs the life of the chainsaw but also improves cutting efficiency and reduces wear and tear.

Moreover, maintenance is made simple with the easy-access air filter and tool-less chain tension adjustment features. These innovations allow users to maintain their chainsaw with minimal hassle, ensuring that they can get back to work quickly and efficiently.

Finally, the Poulan 181121 prioritizes safety, featuring a safety chain brake that minimizes the risk of accidents during use. The combination of safety features and effective design makes this chainsaw a responsible choice for both new and experienced users.

In summary, the Poulan 181121 offers a perfect blend of power, comfort, and convenience. With its efficient engine, ergonomic design, and advanced technologies, it is an ideal choice for anyone looking to tackle outdoor cutting tasks. Whether for personal use or professional landscaping, the Poulan 181121 proves to be a reliable and robust chainsaw that stands up to the job.
Top Page Image Contents