Troy-Bilt 12215 owner manual Using the Edger Attachment, Attachments, Tilling Patterns

Page 10

Section 4: Operation

Tilling Patterns

1.When preparing a seedbed, go over the same path twice in the first row, then overlap one-half the machine width on each successive pass (Figure 10).

2.After going up and down the rows in one direction, make second passes at a right angle across the original passes (Figure 11). Again, overlap each pass to thoroughly pulverize the entire seedbed area. In very hard ground, it may take three or four passes before the desired depth is achieved.

3.If your garden is not wide enough to till lengthwise and then crosswise, then first overlap by one-half the machine width, followed by successive passes at one-quarter machine width. This overlapping method assures thorough tilling.

Figure 10: Use an overlap technique on every pass.

Figure 11: Make a second set of passes at a right angle over the first set of passes.

USING THE EDGER ATTACHMENT

The Edger Attachment makes clean, sharp edges next to walkways, driveways, paths, planted areas, patios, etc. See Assembly Steps, STEP 4: in Section 2 for instructions on attaching this attachment.

Take your time when edging. Decide how far away the edge is to be from the walk or drive, then slowly proceed using the walk or drive as your sight line.

Other attachments are can be purchased separately. See Attachments below for more details.

ATTACHMENTS

The following Tiller/Edger attachments are available where the Tiller/Edger was purchased. See your local authorized dealer or con- tact the Factory for details.

Power Lawn Rake Attachment – Model 12575

The Power Lawn Rake helps to keep

your lawn healthy and vigorous. Matted grass and debris looks unattractive and stifles lawn

growth and overall health. This attachment mounts without tools and features dozens of tempered steel “fingers” that penetrate and loosen matted grass without disturbing root growth. An 18"-wide swath covers a large lawn area quickly.

Lawn Aerator Attachment – Model 12574

The Lawn Aerator Attachment helps to promote healthy, dense lawns by

loosening and aerating the soil for better root growth. Four tempered steel tines punc- ture the surface of the

lawn thus allowing nutri- ents to reach the roots

more easily. This attach- ment assembles without tools.

10

Image 10
Contents Tiller/Edger See Back Cover for Customer Service Information Preparation SafetyTraining OperationNever perform maintenance when SafetyMAINTENANCE/STORAGE If fuel tank must be drained, do so outdoorsIntroduction AssemblyAssembly Steps Unpacking InstructionsGas AssemblyTo Install the Edger Attachment Fill Fuel TankKnow Your Equipment Features and ControlsEngine Controls Stopping Starting the Engine OperationPRE-START Preparation Starting the EngineTilling and Cultivating Adjusting Tine PositionsOperation CultivatingAttachments Using the Edger AttachmentPower Lawn Rake Attachment Model Tilling PatternsEquipment Maintenance MaintenanceEngine Maintenance Spark Plug Cooling System MaintenanceTine Removal Installation Arranging Tines for Narrow TillingStorage Off-Season Storage ProcedureArranging Tines For Stony Soil Conditions Troubleshooting Safety and Operating DecalsParts List Ref # DescriptionModel Parts List Y, Z Repair Parts 15-17 Carburetor Safety RulesIndex Engine Recoil Starter RopePage Engine Service and Repair Warranty ServiceReplacement Parts Owner Registration Card

12215 specifications

Troy-Bilt has long been recognized for its commitment to quality outdoor power equipment, and the Troy-Bilt 12215 lawn mower is a prime example of their innovation and durability. This functional and reliable mower is designed to give homeowners a powerful tool for maintaining their lawns while simplifying the mowing process.

One of the standout features of the Troy-Bilt 12215 is its robust, reliable engine. Equipped with a 159cc OHV engine, it provides ample power for tackling various grass types and sizes of yards. Its recoil start system ensures quick and easy ignition, allowing users to get started without any hassle.

Another notable characteristic is the mower’s cutting deck. The 12215 boasts a 21-inch steel deck, which ensures durability and longevity. Its design allows for a clean, precise cut across a wide swath, improving mowing efficiency and reducing the frequency of passes required to achieve a well-manicured lawn.

The Troy-Bilt 12215 also offers a 3-in-1 cutting system, giving users the versatility to mulch, side discharge, or bag clippings based on preference and lawn conditions. The inclusion of a rear bagging system makes it easy to collect clippings, while the mulching option helps fertilize the lawn naturally, reducing the need for additional lawn care products.

Comfort is crucial when it comes to lawn mowers, and Troy-Bilt enhances the user experience with an adjustable seat. The mower features a comfortable handle with a soft grip which reduces vibration and fatigue during longer mowing sessions. The easy height adjustment allows users to select their desired grass length, accommodating various mowing preferences.

The Troy-Bilt 12215 is also designed with safety in mind. It includes features such as a blade brake, which automatically stops the blade when the user releases the handle, ensuring that the mower is safe to use when not in operation.

Lastly, this mower is remarkably easy to maintain due to its accessible components. Whether changing oil, cleaning the air filter, or tuning the mower, owners will find these processes straightforward, contributing to a longer lifespan for the machine.

In summary, the Troy-Bilt 12215 lawn mower combines reliable performance, innovative features, and user-friendly design. These characteristics make it a popular choice among homeowners seeking efficiency and quality in their lawn care routine.