Troy-Bilt 12215 owner manual Troubleshooting, Safety and Operating Decals

Page 14

Section 5: Maintenance

WARNING

Before inspecting, cleaning or servicing the machine, shut off engine, wait for moving parts to stop, dis- connect spark plug wire and move wire away from spark plug.

Failure to follow these instructions can result in serious personal injury or property damage.

TROUBLESHOOTING

Before performing any of the corrections in this Troubleshooting Chart, refer to the appropriate information contained in this Manual and the Engine Owner’s Manual for the correct safety precautions and servicing procedures. Contact your local authorized Engine Service Dealer for engine service. Contact your local authorized dealer for service problems with the machine.

PROBLEM

 

POSSIBLE CAUSE

 

CORRECTIVE ACTION

Engine does not start.

1. Spark plug wire disconnected.

1.

Reconnect wire to spark plug.

 

2.

Out of gas/two-cycle oil fuel mixture.

2.

Check fuel tank. Add fuel mixture.

 

3.

Stale fuel mixture.

3. Drain old mixture. Add fresh mixture.

 

4.

Priming procedure not correct.

4.

Refer to starting procedure in manual.

 

5.

Dirty air filter(s).

5.

Clean or replace air filters.

 

6.

Worn, corroded or broken spark plug.

6.

Replace spark plug.

 

7.

On/Off Switch in OFF position.

7.

Move On/Off Switch to ON.

 

 

 

 

Engine runs poorly or

1. Fouled spark plug.

1.

Remove, inspect, clean spark plug.

has low power under

2. Dirty air filter(s).

2.

Clean or replace dirty air filters.

tilling conditions.

3. Stale fuel mixture.

3.

Drain old mixture. Add fresh mixture.

 

4.

Carburetor out of adjustment.

4. Adjust carburetor. See Manual.

 

 

 

 

Engine overheats.

1. Engine cooling fins clogged.

1.

Remove dirt and debris from fins.

 

2.

Improper amount of oil in fuel mixture.

2.

Drain tank; fill with correct mixture.

 

 

 

 

Tines stop rotating.

1. Object wedged between tines and hood.

1.

Remove wedged object.

 

2.

Internal transmission problem.

2.

Authorized service dealer.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SAFETY AND OPERATING DECALS

Decals are not shown at full size. See Parts List pages for reordering information.

WARNING

ON

Hot surfaces can

 

 

cause severe burns.

 

Do not touch

RevA

 

muffler or

1904549

 

adjacent areas.

 

On rear, left-side

tine shield

WARNING

OFF

 

On right-

On top, left-side tine

side han-

dlebar

shield

 

On rear, right-side tine

 

shield

 

1918221.A(1/00)

On top of handlebar

On right-side handlebar

14

Image 14
Contents Tiller/Edger See Back Cover for Customer Service Information Preparation SafetyTraining OperationNever perform maintenance when SafetyMAINTENANCE/STORAGE If fuel tank must be drained, do so outdoorsIntroduction AssemblyAssembly Steps Unpacking InstructionsGas AssemblyTo Install the Edger Attachment Fill Fuel TankEngine Controls Features and ControlsKnow Your Equipment Stopping Starting the Engine OperationPRE-START Preparation Starting the EngineTilling and Cultivating Adjusting Tine PositionsOperation CultivatingAttachments Using the Edger AttachmentPower Lawn Rake Attachment Model Tilling PatternsEngine Maintenance MaintenanceEquipment Maintenance Spark Plug Cooling System MaintenanceTine Removal Installation Arranging Tines for Narrow TillingArranging Tines For Stony Soil Conditions Off-Season Storage ProcedureStorage Troubleshooting Safety and Operating DecalsParts List Ref # DescriptionModel Parts List Y, Z Repair Parts 15-17 Carburetor Safety RulesIndex Engine Recoil Starter RopePage Engine Service and Repair Warranty ServiceReplacement Parts Owner Registration Card

12215 specifications

Troy-Bilt has long been recognized for its commitment to quality outdoor power equipment, and the Troy-Bilt 12215 lawn mower is a prime example of their innovation and durability. This functional and reliable mower is designed to give homeowners a powerful tool for maintaining their lawns while simplifying the mowing process.

One of the standout features of the Troy-Bilt 12215 is its robust, reliable engine. Equipped with a 159cc OHV engine, it provides ample power for tackling various grass types and sizes of yards. Its recoil start system ensures quick and easy ignition, allowing users to get started without any hassle.

Another notable characteristic is the mower’s cutting deck. The 12215 boasts a 21-inch steel deck, which ensures durability and longevity. Its design allows for a clean, precise cut across a wide swath, improving mowing efficiency and reducing the frequency of passes required to achieve a well-manicured lawn.

The Troy-Bilt 12215 also offers a 3-in-1 cutting system, giving users the versatility to mulch, side discharge, or bag clippings based on preference and lawn conditions. The inclusion of a rear bagging system makes it easy to collect clippings, while the mulching option helps fertilize the lawn naturally, reducing the need for additional lawn care products.

Comfort is crucial when it comes to lawn mowers, and Troy-Bilt enhances the user experience with an adjustable seat. The mower features a comfortable handle with a soft grip which reduces vibration and fatigue during longer mowing sessions. The easy height adjustment allows users to select their desired grass length, accommodating various mowing preferences.

The Troy-Bilt 12215 is also designed with safety in mind. It includes features such as a blade brake, which automatically stops the blade when the user releases the handle, ensuring that the mower is safe to use when not in operation.

Lastly, this mower is remarkably easy to maintain due to its accessible components. Whether changing oil, cleaning the air filter, or tuning the mower, owners will find these processes straightforward, contributing to a longer lifespan for the machine.

In summary, the Troy-Bilt 12215 lawn mower combines reliable performance, innovative features, and user-friendly design. These characteristics make it a popular choice among homeowners seeking efficiency and quality in their lawn care routine.