Section
3
Features and Controls
KNOW YOUR EQUIPMENT
READ THIS OWNER’S MANUAL AND ALL SAFETY RULES BEFORE OPERATING YOUR EQUIPMENT. Know the location and function of all features and controls on the equipment. Save this manual for future reference.
WARNING
Before operating your machine, carefully read and under- stand all safety, controls, and operating instructions in this Manual, the separate Engine Owner’s Manual and on the decals on the machine.
Failure to follow these instructions can result in serious personal injury.
G
J 
BJ
TILLER/EDGER CONTROLS
Handlebar Height Adjustment Knob (B, Figure 5)
Two height settings, plus a storage position are available. Refer to Assembly Steps, STEP 1 in Section 2 for adjustment instructions.
Tilling Depth Adjustment Knob (C, Figure 5)
Loosening the knob enables you to move the wheel bracket
(K)up or down on the height adjustment bar (L). This con- trols the tilling depth.
IMPORTANT: Do not move the wheel bracket any higher than the top of the adjustment bar.
Adjustable Tine Patterns (D, Figure 5)
The four tine sections are assembled at the factory for max- imum performance under a wide variety of conditions. If needed, the tines can be arranged for narrower tilling or close cultivating. The tines can also be arranged to till very stony soil. See Adjusting Tine Patterns in Section 4 for details.
Carrying Handle (E, Figure 5)
When the handlebar is folded in the storage position the unit can be carried by the carrying handle. The carrying handle also serves as a
Edger Attachment (Optional - not shown)
An Edger Attachment is available to make clean, sharp edges next to walkways, driveways, paths, planted areas, patios, etc. See Attachments in Section 4 for more information.
E 
B
F J
C
K L
D
Figure 5: Features and controls.
ENGINE DETAIL
A |
M |
ENGINE CONTROLS
Engine On/Off Switch (A, Figure 5)
Use the engine On/Off Switch to start or stop the engine. See Starting and Stopping the Engine in Section 4 and the Engine Owner’s Manual for details.
Throttle/Tines Lever (G, Figure 5)
Squeeze this lever to start tine rotation and to vary the tine speed. Release the lever to stop all tine motion. See Starting and Stopping the Engine in Section 4 for details.
IMPORTANT: Do not squeeze this lever when starting the engine.
Engine Recoil Start Rope (F, Figure 5)
Use the recoil start rope to start the engine. See Starting and Stopping the Engine in Section 4 and the Engine Owner’s Manual for details.
Fuel Primer Bulb (M, Figure 5)
Use the fuel primer bulb to help start the engine under certain conditions. See Starting and Stopping the Engine in Section 4 and the Engine Owner’s Manual for details.
7