Murray FT6000X92A manual Engine Maintenance, Check or Fill Engine Oil, Change Engine Oil

Page 18

NORMAL CARE

CAUTION

Do not operate tiller before reading the engine manual provided in the parts packet.

WARNING

Temperature of muffler and near by areas may exceed 150° F. Avoid these areas.

Engine can overheat and become damaged if debris blocks the cooling system or rotating screen.

Never run engine without complete air cleaner installed on engine.

Engine Maintenance

Refer to the engine manual included in your parts packet for information on engine maintenance. Your engine manual provides detailed information and a maintenance schedule for performing the following tasks:

1.Check oil level before each use or after every 8 hours of operation.

2.Change oil after first 5-8 hours of operation. Change oil ` while engine is warm. Refill with new oil of recommended

grade.

4.Check spark plug yearly or every 100 hours of operation.

5.Service air cleaner.

6.Keep engine and parts clean.

7.Check engine and equipment often for loose nuts and bolts, keep these items tightened.

Engine is shipped from factory without oil. You must add engine oil before starting engine.

Check or Fill Engine Oil

1.Add oil according to engine manual. Do not overfill. Use a clean, high quality detergent oil. Container must be marked A.P.I. Service SF - SJ. Use no special additives with recommended oils. Do not mix oil with gasoline. Oil level must be full. Check the oil level by removing the dipstick. Oil level should be at FULL line on dipstick.

2.Always check oil level before starting engine. Refer to engine manual for capacity and type of oil to use.

Change Engine Oil

1.Remove the fasteners that secure the dirt shield at the bottom of the tiller.

2.Take off the dirt shield and you can see the oil drain.

3.Refer to the engine manual for how to change oil.

Dirt Shield

Figure 12

F041303L

18

Image 18
Contents Front Tine Rototiller F041303L Model Identification Model InformationThank You Owners Responsibility GeneralPreparation Maintenance and Storage OperationSafety Decals Transport Position Operating Position Unpack Tiller Install the Depth Regulator Lever Fill Engine CrankcaseDrive Safety Control Lever NeutralBelt Tension Adjustment To increase belt tensionDepth Regulator Lever PRE-START Inspection START-UPTilling Shutting DownSchedule General Belt ReplacementServicing the Rototiller Check Belt TensionEngine Maintenance Check or Fill Engine OilChange Engine Oil Clean Tine Axle Shaft Check Tiller Transmission GreasePrepare for Storage Troubleshooting Guide Problem REMEDY/ACTIONHandlebar Assembly FT6000X92AShaft Assembly Motor Mount & Hood Assembly Wheel & Tire Assembly Page Page MURRAY, INC. Centralparts Distributors

FT6000X92A specifications

The Murray FT6000X92A is a powerful and versatile outdoor utility vehicle designed to meet the demanding requirements of both residential and commercial applications. This exceptional machine is built to handle a wide range of tasks, making it an indispensable tool for landscapers, contractors, and homeowners alike.

One of its standout features is the state-of-the-art 6000-watt generator, which provides ample power for various equipment. This feature is particularly useful in scenarios where electricity supply is unreliable or non-existent, such as remote job sites or during power outages. The generator is equipped with multiple outlets, including 120V and 240V options, allowing for versatile connectivity to different tools and appliances.

The FT6000X92A is powered by a robust 200cc engine, engineered for durability and performance. This engine is designed with advanced technologies that enhance fuel efficiency and reduce emissions, making it an eco-friendly choice. The system is built with a reliable cooling mechanism to ensure optimal operation even in intensive working conditions.

In terms of mobility, the vehicle boasts an advanced suspension system that offers excellent stability and smooth ride quality over various terrains. This is complemented by its all-terrain tires, which provide superior traction, making it easy to navigate through mud, gravel, and uneven surfaces. The ergonomic design of the vehicle ensures comfort for operators during prolonged use and features an adjustable seat to accommodate different user preferences.

Safety is a critical aspect of the FT6000X92A, which includes features such as automatic shut-off mechanisms, roll-over protection, and a reinforced frame designed to safeguard the operator in case of unexpected events. Additionally, the unit is outfitted with LED headlights for improved visibility during low-light conditions, ensuring that tasks can continue into the evening hours without interruption.

The Murray FT6000X92A is more than just a utility vehicle; it's a reliable partner in any landscaping or construction project. Its combination of power, efficiency, and safety, along with user-centric features, make it a top choice for anyone in need of a dependable outdoor vehicle. Whether tackling tough jobs or simple household tasks, the FT6000X92A is built to exceed expectations and deliver professional-grade results.