Murray FT6000X92A manual Operation, Maintenance and Storage

Page 6

SAFETY RULES

OPERATION

• Never allow bystanders near the unit.

• Never operate the tiller without guards, covers, and

• Never operate the tiller without good visibility or light.

hoods in place.

• Take all possible precautions when leaving the

 

• Keep hands, feet, and clothing away from rotating

machine unattended. Disengage drive control lever,

parts. Keep clear of tiller tines at all times.

stop the engine, wait for all moving parts to stop, and

• Tines rotate when tiller is engaged in forward-- in

make certain guards and shields are in place.

• When leaving the operating position for any reason:

forward, tines rotate when the drive safety control

lever is pulled down. Releasing the drive safety

- shut off the engine.

control lever to neutral stops the tines.

- wait for all moving parts to stop.

• Exercise extreme caution when operating on or

MAINTENANCE AND STORAGE

crossing gravel drives, walks, or roads. Stay alert for

hidden hazards or traffic.

• Keep machine, attachments, and accessories in safe

 

• After striking a foreign object, stop the engine, remove

working condition.

 

the wire from the spark plug and secure, thoroughly

• Check shear bolts, engine mounting bolts, and other

inspect the tiller for any damage, and repair the

bolts at frequent intervals for proper tightness to be

damage before restarting and operating the tiller.

sure the equipment is in safe working condition.

 

• If vegetation clogs the tines, STOP THE ENGINE

• To prevent accidental starting, always disconnect the

AND DISCONNECT THE SPARK PLUG WIRE

spark plug wire from the spark plug before performing

before removing vegetation by hand.

tiller maintenance.

 

• Engine muffler will be hot from operation. Do not

• Never run the engine indoors. Exhaust fumes are

touch it with bare skin or a severe burn may result.

deadly.

 

• If the unit should start to vibrate abnormally, stop the

• Always allow muffler to cool before filling fuel tank.

engine and check immediately for the cause. Vibration

• Never store equipment with gasoline in the tank inside

is generally a warning of trouble.

a closed building where fumes may reach an open

• Do not run the engine indoors; exhaust fumes are

flame or spark. Allow the engine to cool before storing

dangerous.

in any building.

 

• Do not overload the machine capacity by attempting

• Always refer to the operator's guide instructions for

to till too deep at too fast a rate.

important details if the tiller is to be stored for an

 

 

extended period.

F041303L

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Front Tine Rototiller F041303L Model Identification Model InformationThank You Owners Responsibility GeneralPreparation Maintenance and Storage OperationSafety Decals Transport Position Operating Position Unpack Tiller Install the Depth Regulator Lever Fill Engine CrankcaseDrive Safety Control Lever NeutralBelt Tension Adjustment To increase belt tensionDepth Regulator Lever PRE-START Inspection START-UPTilling Shutting DownSchedule General Belt ReplacementServicing the Rototiller Check Belt TensionEngine Maintenance Check or Fill Engine OilChange Engine Oil Clean Tine Axle Shaft Check Tiller Transmission GreasePrepare for Storage Troubleshooting Guide Problem REMEDY/ACTIONHandlebar Assembly FT6000X92AShaft Assembly Motor Mount & Hood Assembly Wheel & Tire Assembly Page Page MURRAY, INC. Centralparts Distributors

FT6000X92A specifications

The Murray FT6000X92A is a powerful and versatile outdoor utility vehicle designed to meet the demanding requirements of both residential and commercial applications. This exceptional machine is built to handle a wide range of tasks, making it an indispensable tool for landscapers, contractors, and homeowners alike.

One of its standout features is the state-of-the-art 6000-watt generator, which provides ample power for various equipment. This feature is particularly useful in scenarios where electricity supply is unreliable or non-existent, such as remote job sites or during power outages. The generator is equipped with multiple outlets, including 120V and 240V options, allowing for versatile connectivity to different tools and appliances.

The FT6000X92A is powered by a robust 200cc engine, engineered for durability and performance. This engine is designed with advanced technologies that enhance fuel efficiency and reduce emissions, making it an eco-friendly choice. The system is built with a reliable cooling mechanism to ensure optimal operation even in intensive working conditions.

In terms of mobility, the vehicle boasts an advanced suspension system that offers excellent stability and smooth ride quality over various terrains. This is complemented by its all-terrain tires, which provide superior traction, making it easy to navigate through mud, gravel, and uneven surfaces. The ergonomic design of the vehicle ensures comfort for operators during prolonged use and features an adjustable seat to accommodate different user preferences.

Safety is a critical aspect of the FT6000X92A, which includes features such as automatic shut-off mechanisms, roll-over protection, and a reinforced frame designed to safeguard the operator in case of unexpected events. Additionally, the unit is outfitted with LED headlights for improved visibility during low-light conditions, ensuring that tasks can continue into the evening hours without interruption.

The Murray FT6000X92A is more than just a utility vehicle; it's a reliable partner in any landscaping or construction project. Its combination of power, efficiency, and safety, along with user-centric features, make it a top choice for anyone in need of a dependable outdoor vehicle. Whether tackling tough jobs or simple household tasks, the FT6000X92A is built to exceed expectations and deliver professional-grade results.
Top Page Image Contents