Crown Audio CE Series Choose Input Wire and Connectors, Balanced Input Connector Wiring

CE Series Power Amplifiers

2 Setup

2.4Choose Input Wire and Connectors

You have three choices of input connectors: 1/4-inch (6.35-mm) phone, 3-pin XLR, or barrier strip. You can also use either balanced or unbalanced wiring.

Figure 2.3 shows balanced connector pin assignments for XLR and phone. Figure 2.4 shows unbalanced connector pin assignments for XLR and phone.

Figure 2.5 shows barrier strip input wiring for a balanced signal. Both channels should be wired using a common center terminal for ground con- nection.

NOTE: Custom wiring should only be performed by qualified personnel.

Figure 2.3 Balanced Input

Connector Wiring

Figure 2.4 Unbalanced Input

Connector Wiring

Figure 2.5 Barrier Strip Input Wiring:

Balanced Signal In

Operation Manual page 7