Onkyo DV-SP504E Connecting -compatible Components, Connecting the Multichannel Analog Output

Connecting the DVD player—Continued

Connecting the Multichannel Analog Output

Connect the DVD player’s FRONT/D.MIX 1 or 2, SURR 1, CENTER, and SUBWOOFER jacks to the multichannel analog audio input on your AV receiver.

You can use three stereo audio cables for this.

Connecting -compatible Components

FRONT/D. MIX

REMOTE

CONTROL

AUDIO OUTPUT

ANALOG

FRONT/D. MIX SURR1 CENTER

1 2

SUB

WOOFER

FRONT

RL

SUBCENTER

SURR

AV receiver

■If Your AV Receiver has a 7.1-channel Analog Audio Input

Connect the DVD player’s SURR 1 jacks to your AV receiver’s surround input jacks, and connect the SURR 2 jacks to your AV receiver’s surround back input jacks. The SURR 1 and SURR 2 outputs output the same signals.

When you make this connection, set the SURR MODE switch to “1+2.”

If you use this connection, the output level will be reduced by 3 dB (i.e., the volume level will be reduced slightly).

1 2

IN

L

R

REMOTE

CONTROL

AV receiver

•The remote controller supplied with Onkyo AV receiver or amplifiers can be used to control the DVD player.

•The function of the upper and lower connectors are the same. Connect to either one.

•To use , in addition to an connection, you must also make an analog audio connection (RCA) between

the DVD player and your other -capable compo- nents.

23